How do I configured the PXI-4351 to read thermocouples with Labwindows?

Hi,
I have a PXI-4351 datalogger and am trying to configured it to read thermocouples, the terms on the functions don't make any sense since it asks for a transducer group...thermocouples are not transducers. Anyone has a software reference for this...the online help is not enough, i guess i need information on how to read a thermocouple. HELP!!!

Hi,
My question is, why do you think Thermocouples are not transducers? In the application with NI 435x, thermocouples are considered transducers just like thermistors, etc.
1. You may want to take a look at examples here:
C:\VXIpnp\WinNT\NI435x\examples\CVI
If you are talking about the NI435x_Configure function, you can find the elaborate help on the function by going to Start>>Programs>>National Instruments 453x>>NI435x Help.
Please do let me know if you need more help.
Sincerely,
Sastry Vadlamani
Applications Engineer
National Instruments

Similar Messages

  • How Can I configure the 6024E board for reading the voltage from a source?

    Hi, I have a little problem, I want to use the 6024E board for reading voltage from a source and then display this on the monitor, and also I want to change the voltage from the output using the computer. I read the manual but I don't understand how to connect and configure the board. It is to proof that the board receive and send information.
    Thanks, sorry for my english, I'm from Mexico, if you don't understand something about my explanation tell me.

    Thank you, now I'm trying to do my project and I have another question, there are differents ways to connect the source and I choose the NRSE configuration because I'm going to use a grounded signal source... well in the manual says "The signal is then connected to the positive input of the PGIA, and the signal local ground reference is conenected to the negative input ot the PGIA. The ground point of the signal should, therefore, be connected to the AISENSE pin." I don't understand this because I only have two wires and here is talking about three connections, please help me, how do I connect the source to the board? I have the positive wire and the negative wire.... maybe is because I don't have a perfect english and I don't understand the sentence...

  • How do I configure the custom external editor to work with Premiere Elements 13

    Situation
    I own Lightroom 5.6 and I'm experienced. I've just bought Premiere Elements 13 and I'm a video-editing virgin (be gentle with me). I've spent a day experimenting, reading, watching videos, I've tried asking my question in Premiere Elements forum, and I'm still stuck (i.e. I've tried reasonably hard to solve my own problem).
    Problem
    I've tried to set up the custom external editor in Lightroom 5 to send photos to Premiere Elements, so that I can incorporate images into movies. Having set it up, when I use it by selecting Photo/Edit In/Premiere Elements 13/, there is an exciting lull as a copy of the image is created and appears in LR, then Premiere Elements launches, then what??? There is no clue as to what has happened to the image regarding its import into Premiere Elements 13. It doesn't appear on the screen, it doesn't appear in the Organizer, it's no-where to be seen, other than in LR!
    Resolution sought
    Can anyone tell me:
    1. Is it possible to use Premiere Elements as an external editor in LR5 ?
    2. What are the precise settings for each field (I've played with the various field options but obviously haven't yet found the right combination)?
    3. If I configure it correctly, what does good look like: what should I expect to see happen in Premiere Elements when I squirt photos over from LR5 via the 'Edit In' option in LR5?
    I don't know if this is relevant: MacBook Pro 16GB 2.8Ghz i7, 750GB SSD (i.e. plenty of space, plenty of horsepower), OS X 10.9.5
    I'm hoping the answer isn't 'sorry, it can't be done' because if it is possible, it would be a real contribution to my video editing workflow.
    Thanks
    Phil

    You don't have to buy an Apple keyboard, but you probably need at least to buy a keyboard that connects via proper USB instead of through some Windoze-world adapter, which probably requires a driver that's not available for the Mac OS.
    The Apple Bluetooth KB and Magic Trackpad make a fabulous combination for use with any MacBook Pro that spends a lot of time in clamshell mode, because the trackpad works exactly like the built-in trackpad. So there's no transition adjustment to make when you pack up your MBP and go portable with it.

  • Temperatures corresponding to voltage ranges with the PXI-4351/TC-2190

    Using a PXI-4351 and TC-2190 with a K-type thermocouple, what temperature range do the voltages (+/- 625 mV, 1.25 V, 2.5 V, 3.75 V, 7.5 V, and 15 V) correspond to? How much accuracy does each different range of voltages have? All I could find was that to get improved accuracy, use a range of 2.5 volts or less (document #1X0F7L3E). Also, will using several channels at vasly different temperatures (ie. room temp. and several hundred degrees) affect which range I should select?

    The full temperature range of a K type thermocouple from -270C to 1370C represents a voltage range from -6.45mV to 54.8mV. If the only sensors you are using are thermocouples then you should choose the smallest range. The 4351 applies one gain setting to all channels, so the only reason you would want to use anything but the smallest range would be if you have other types of sensors with larger voltage swings. You can find voltages for any thermocouple at any temperature at the link below.
    Regards,
    Brent R.
    Applications Engineer
    National Instruments
    http://srdata.nist.gov/its90/menu/menu.html

  • How do I configure the Airport utility to allow more than one rule per port?

    How do I configure the Airport Utility (AU) to allow more than one rule per port?
    I am on a home network, with broadband cable modem.  I have my airport extreme connected to the broadband modem.  I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols.  The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists". 
    I need to be able to allow SSH on both of my servers, for instance.  Am I missing something?  Is this doable with AU?
    Thanks for any insight.
    Khalid

    The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
    What you won't be able to do is map a single or multiple ports to multiple IP addresses.

  • Fedora 13: After upgrading from FF3.6 to FF6.0.2 I no longer have a Java plugin. How do I configure the Java Plugin for FF 6 ? There is no Java Plugin at the site

    I am Fedora 13x64 bit. I just installed FF v6.0.2 from the FF download site. I backed up the existing FF 3.6 as firefox_old
    I need to have a Java plugin to access company site, how do I configure the Java Plugin ?
    At the Plugin area in FF6 there is no Java Plugin available, even after a search.
    I have Java 1.6.0 installed in the OS at:
    /usr/lib/jvm/java-1.6.0/jre/lib/amd64/libnpjp2.so
    I googled how to configure Java Plugin for FF 6 for Fedora 13 and the trick was to create a soft link from /home/<userID>/.mozilla/plugins to the above libnpjp2.so

    AVtech wrote:
    . . . If a person can't get an answer here I don't know where else to turn since Sun certainly wouldn't offer tech support for a free product . . .These forums are user forums, and only occasionally visited by Sun employees. Sun does provide Java technical support options, although (of course) at a charge.
    See:
    http://developers.sun.com/services/
    . . . I guess we'll just use JRE 5 until it's unsupported, whenever that will be. I'm still waiting for an answer on that question, too. See:
    http://java.sun.com/products/archive/eol.policy.html
    http://www.sun.com/service/eosl/
    This document (part IV and Appendix) has some debugging and troubleshooting information that may allow someone involved in the problem to resolve the cause:
    See:
    http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/contents.htm
    Any steps that you can take to isolate the problem to specific Java versions, browsers, applets, web sites, operating systems (and versions), etc, would enhance the possibility of getting help.
    You can try the applets at this Sun location and see if any of them are "slow".
    See:
    http://java.sun.com/javase/6/docs/technotes/samples/demos.html

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • How do you configure the server in this situation?????????????

    Hi,
    We have Oracle 10.2 and Windows 2003.
    We have Oracle on Cluster (with Windows software).
    When the System are without cluster all it’s OK!!!!!!
    We have 2 Resources Cluster Group: Oracle and Applications.
    We have Oracle in Oracle cluster group.
    We have “W” Drive and a ftp program in Application cluster group.
    We have C drive in both nodes. We have installed Oracle in both nodes but we have “W” drive only associate to the Active Node because is a Cluster resource (Application cluster group).
    All days we receive text files by ftp and we put it on W Drive. This text files are readen with external tables in Oracle.
    We have a problem when oracle fails and it goes to the another node (for ex. node2) because the external tables fail because the files are on Node1 on W Drive. If we move manually Applications cluster resource to Node2 then all it is OK.
    We think to put UNC pathes instead of “W” but it’s not possible (Metalink: Note:290703.1)
    How do you configure the server in this situation?????????????
    Thanks!

    We run a similar configurations and i doubt you have a chance other then reconfigure your setup. The way we do it is to have an ftp client in our database group and periodically transfer the files a second time (not elegant but it's working).
    If that's not an option you might be able to use unc names in your ftp server and set the ftp root to a directory hosted on a disk which is part of the database group.
    Or move to unix (that's what we do now). Than you don't have to bounce your server once in a month to apply security patches...

  • I am unable to use my own network with my iphone for wi-fi.The message says "unable to join the network (my network). How do I configure the info in the phone to allow me access?

    How do I configure the setting in my iphone to allow me use of my own network?

    Thanks for the responses, they have been very illuminating!
    This is very disappointing from The Carphone Warehouse. If they had mentioned this when I went into their stores, I wouldn't have completed the purchases. I bought two phones at separate outlets and neither of them told me this.
    I have been in contact with T-Mobile already as I thought they had sneakily applied a software update that locked the phone. They have denied locking it and suggest that it is something that Apple do. Their solution was a factory reset.
    I have a call logged with Apple this afternoon, so will see what they suggest. Hopefully they will give me something that I can take to The Carphone Warehouse or T-Mobile.

  • How do I configure the number of connection in the pool for webservice axis

    Hi
    How do I configure the number of connection in the pool using xml.
    We are using axis 1.4 and commons-httpclient-3.0.1Is there any way we can do it using the client-config.wsdd file.
    We do not want to do any modification in the code for this.
    Is it possible to set socket timeout also in the wsdd file.
    Your resolution will be really helpful for us.
    Thank You
    Ottran

    Export them at a smaller size:
    File -> Export - not the options at 'Size'
    Regards
    TD

  • How do you configure the DAM so it can be shared across multiple CQ instances?

    How do you configure the DAM so it can be shared across multiple CQ instances?

    You can use shared datastore http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/HowToCombineTheDatastoreToP reserveDiskSpace.html multiple CQ instance will use same file system to share asset
    clustering http://dev.day.com/docs/en/crx/current/administering/cluster.html multiple node will share repository.
    But you can not have something like one DAM and then have different CQ instance pointing to it (As not everything goes in to one location in file system)
    Yogesh

  • How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    See Terence Devlin's thorough explanation here.

  • How do you configure the ipad to print air print but of A4 size please ??????

    how do you configure the ipad to print air print but of A4 size please ??????

    Frankie,
    The usual setting is in Printing Preferences.
    In case you haven't found it yet - it has been a while since your original post - you may have your tray setting stuck on the 4X6 tray.
    I can provide details and "how-to" if you need more help.
    Printer model info would be helpful, and do you have your printer software loaded yet?
    I hope this helps!                                 
    We work hard to help!
    When ever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
     2012 Year of the Dragon!
    Dragon Tips!
    Install your Printer Software!
    Look for your Printer’s Software at your printer’s own website!
    Software, manuals, alerts, “how-to” information, and much more!
    To see if there is software for your printer, Start at:  Support and Drivers
    Kind Regards,
    Dragon-Fur

  • How Can I Driving the PXI Backplane Clock with a PXI-6608?

    How Can I Driving the PXI Backplane Clock with a PXI-6608?
    Is the PXI Backplane Clock the timebase of the PXI Trigger BUS?
    How Can I use a PXI-6608 as the timebase of the PXI Trigger BUS?
    Thanks!

    Hi,
    The 6608 must be in slot 2 of the chassis. Once you make a call to the DAQ driver, the OCXO on the 6608 will be routed to the PXI_Clk 10 line.
    More information on the backplane and routing clock signals can be found in these Knowledge Bases:
    http://digital.ni.com/public.nsf/websearch/5EC3704​19A5ECA7A86256CFC0061C528?OpenDocument
    http://digital.ni.com/public.nsf/websearch/D5B8D4D​3B67DF1E086256BF8007BBF93?OpenDocument
    I hope this helps. Have a Great Day!
    George

  • How can we configure the width of the table in SAP DB

    Hello sirs,
    How can we configure the width of the table in SAP DB? (<b>i.e to specify the total width of the sum of all columns</b>). I need to change the default value of table width for adding fields with biggger sizes...
    With best regards,
    Sudheesh....

    Hi,
      The restrictions for using SAPDB are available at the following link http://dev.mysql.com/doc/maxdb/en/f6/069940ccd42a54e10000000a1550b0/content.htm
      The 'internal length of the table' is 8088 bytes, which intern maps to the column width attribute.
    Can we change the column width?
    The answer is 'NO'.
    check the general Column width error (-1115) at link below where it is specified that the column width can be altered http://dev.mysql.com/doc/maxdb/en/bb/57f18204fd11d2a96c00a0c9449261/content.htm
    Refer link below for more details on the width of each column (based on the datatype associated with the column). http://orgs.man.ac.uk/documentation/mysql/manual_Column_types.html
    So we will have to judiciously look into the boundary values for each column and set the right length because if the column is char(200) and it holds a null value then length allocated is 200 bytes.
    The restriction cannot be broken.
    Regards,
    S.Divakar

Maybe you are looking for