How do i confirm whether it is using only one partition.

I want to select the data from one partition only.
How do i confirm my select query using only one partition.
To front end developers how do i suugest to use correct partition.
I know in the select query we can write partion name also if i know the partition.
But i don't the correct partition name as a front end developer.

Hello,
You can find partitions for the table from following view user_tab_partitions. You can use PARTITION Clause but it defeats the purpose of having partition key column,
You should be able to do this
select * from my_part_table where part_key='key';Regards

Similar Messages

How to generate a delayed retriggerable pulse using only one counter with PXI 6070E card

Hi
I have a problem in generating a retriggerable delayed pulse with a single counter(triggered through a signal at gate) using PXI 6070E card. VI was developed in NI LabVIEW traditional DAQ Ver.7.1. I have used the "delayed pulse generator config" VI and a "Start counter" & "Stop counter" VIs for the purpose. But there is no output seen at the out terminal of counter. So I introduced a "wait" VI and set it to 1 sec. Now the pulse output appears but some pulses are missing mometarily after every 1 sec interval. (any solution for this)
I have gone through a few similar requests in the forum but they suggest either to use two counters or to generate a finite pulse train which does'nt fit my application. Moreover PXI 6070E has only 2 counter timers. I am already using one counter to measure the frequency of a pulse train(signal 1). The application requires to generate a delayed retriggerable pulse for every pulse in signal 1. So I have only one counter left.
Can I measure the frequency of signal 1 by analog means.? so that I can use two counters for pulse generation. (Signal 1 is a TTL signal).
Request some help.
Thanks in Advance
Regards

A finite pulse train (N_Pulses >= 2) does require the use of 2 counters on most of our older hardware including your 6070E. If you're just talking about generating a single retriggerable pulse, you would only need one counter.
Here's an example in Traditional DAQ that shows you how to set a retriggerable pulse generation (it also allows you to adjust the characteristics of the pulse on-the-fly).
If you're writing a new program, you might consider switching to DAQmx as it supports NI's latest hardware and recent OSes should you ever need to upgrade. Traditional NI DAQ is no longer in active development. Here's an example of how to implement a retriggerable pulse generation in DAQmx. You should take note that you can't use the two drivers to simultaneously talk to the same piece of hardware, although you should be able to go back and forth by resetting the Traditional DAQ driver before switching to DAQmx.
Best Regards,
John Passiak

Ecommerce site - how do I create several product pages using only one table of data?

Hi
Im designing an ecommerce clothing site for my assignment using an access database.
When I create the Data Set it takes all the information from my Acess table "Products" , creating one huge list of products on a single web page.
However, i would like to have the product data split across many web pages depending on there specific Category given [i.e. T-shirts, Jumpers, Trousers, Bags, Acessories].
Does anybody know how to do this? I think it involves setting certain Parameters, or writing a SQL statement in Dataset.
Thanks for any help
Amy

Hi Amy,
Here's a series of articles I did for Adobe Developer's Center, included is an example of a shopping cart app you can use as a staring point or an example if you like.
http://www.adobe.com/devnet/dreamweaver/articles/build_shopping_cart.html
http://www.adobe.com/devnet/dreamweaver/articles/build_shopping_cart_pt2.html
http://www.adobe.com/devnet/dreamweaver/articles/build_shopping_cart_pt3.html
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

How to query on a single row form using only one page

Hi APEX experts, I am just a beginner in apex and I face several problems on development. Despite that the forum helps me a lot and your answers to other people are valuable , I have stacked into something. Could you please someone tell me : if there is a way to define a single row form page based on table in which I could query and update without using a tabular page (to call the single row form). I want only to use only one page. Does APEX has this functionality? Thank you very much?

I haven't tried it, but I am going to guess that yes it's possible (or if I were going to do this, this is what I'd try and I suspect it will work).
If you take a moment and step back and look at what the wizard does when building a "form on a table with report", all it does is build two pages with page 1 (report overview with drill-down Edit button or link usually) calling page 2 (form) and setting the PK field on the page 2 form with an automated row fetch process and built-in DML processes. It's not that hard.
Page 2 really doesn't care what the calling page was in order to query a single row; it just cares that ANY caller sets the primary key value for the ARF process to fetch a row. So I would just make page 2 call itself. This is what I'd do (and you might have to fine-tune little things that I might not have forseen but I think this will work).
For the sake of example, let's say our table is PARTS and in it is a PART_ID, PART_NUMBER, PART_DESCRIPTION, PART_COST, etc. Assume PART_ID is the primary key and sequentially assigned by the DB in a trigger and is functionally meaningless to the user and is for PK purposes only. Let's assume PART_NUMBER is a unique key (although not the PK) by which the user will "know" a unique row (since the PK of PART_ID is more internal and not meaningful to the user). Assume PART_DESCRIPTION, PART_COST, etc. are just attributes.
1. Use the wizard and build a "form on a table with report". This is just to get the handy dandy ARF process and DML processes, validations, etc. all generated for you. Let's assume the report page is Page 1 and the form is Page 2.
2. When done, delete the report page entirely (so delete page 1).
3. Edit the form page (page 2) and change any branch references from the nonexistent page 1 to now be page 2.
Now here's the part where something has to set the internal P2_PART_ID field when page 2 is run. So why not set it from itself from something the user will uniquely enter?
4. Create a P2_PART_NUMBER_FETCH item (text item is fine or if you want a LOV or whatever that's good too....whatever works. For clarity, you might even want to create a separate "search" or "query" region separate and above your existing form region to set this field apart visually so users know it's a search field. Source for this field should be "only when current value in session state is null".
5. Created some sort of "GO" button to go along with the P2_PART_NUMBER_FETCH field.
6. Make sure none of your existing post-submit processes fire when GO is pressed (edit all of the computations and validations and processes and ensure that they have conditions such that they do not fire when the submit value is "GO", so like a PL/SQL expression and set to v('REQUEST')<> 'GO').
7. Add a new validation to your page that only fires when GO is pressed. Have it validate only when GO is pressed. Have it validate that P2_PART_NUMBER_FETCH is not null.
8. Add a new PL/SQL process to your post-submit processing that only fires when GO is pressed. Have it look up to the database based on P2_PART_NUMBER_FETCH and get the PART_ID that corresponds to the part number the user entered and set the part number, something like this (even better for style and reusability if you embed this in a DB package function and call it):
SELECT part_id
INTO :P2_PART_ID
FROM PARTS
WHERE PART_NUMBER = :P2_PART_NUMBER_FETCH;
9. Not sure if the branches that were generated will suffice for this (might need to add a new one...review what you have and see) but the bottom line is that the page should branch to itself (page 2) and not clear the cache.
10. When the page repaints, since :P2_PART_ID is now populated in session state (again, page 2 should not care how it got populated...only should care that it did get populated by anything (including itself)), the automated row fetch (ARF) should fire and query up the row from the database for editing.

How to query which Tcodes specified user used with one day?

Hi guys:
How to query which Tcodes specified user used with one day?

Hi
You can use transaction code ST03N.
1. Go to tx code - ST03N
2. Under "Workload" you can select your "Instance or Total" so that it expands and shows you Days, Week, Month.
3. If you want to look at the transactions executed for a particular day, lets say, then double click on any day.
4. At the bottom left you get "Analysis Views"
5. Select & expand "User and Settlement Statistics"
6. Double click on "User Profile"
7. On the right side of the window you get a list of all the users
8. Double click on a particular user you want to view the details of.
9. The new screen will display the "Transactions/Reports Utilized by User XXX"
If you wanna track which users executed a particular transacation then follow this:
10. In "Analysis Views" expand "Transaction Profile"
11. Double click on "Standard"
You can view the list of Transactions and Reports.
12. Double click on the Tx Code or Report you wanna check and it will show the Use of it.
This will help you.
Regards
Sumit Jain
[reward with points if the answer is useful]

TS3988 It seams that i have another Apple ID, how can i use only one for everything?

It seams that i have another Apple ID, how can i use only one for everything?

http://support.apple.com/kb/HT5622?viewlocale=en_US
-The specific point:
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.

I have used only one laptop since I started using apple products, but itunes notified me that i have authorised 5 computers. how do i correct this

I have used only one laptop since I started using apple products, but itunes notified me that i have authorised 5 computers. how do i correct this

Deauthorize all, then authorize the active computer.

How to disable the security code and use only the Touch ID

how to disable the security code and use only the Touch ID

You can't use Touch ID without a passcode.
http://support.apple.com/kb/HT5883

How do you use only one plugin in Logic for multiple guitar tracks? I want to only use one instance of Pod Farm and run all my guitar tracks through that one instance.

I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.

What he said. Or here is a similar approach with a picture.
1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
Have fun.
Heyclown.
Message was edited by: WizardSongs - Typhoos

How do I change my Apple ID on only one device?

How do I change my Apple ID on only one device? I inherited my husband's iPhone 5. He cleared it but I set it up with same Apple ID so we could share same iTunes account. However, I realised that there are inconveniences such as not being able to Facetime each other. In addition, his iTunes account is UK-based and we'd like to also have a New Zealand iTunes account for various reasons.

Go to settings/icloud and sign out. Then sign in by creating a new Apple ID. Do the same in Settings for Messages, FaceTime and iTunes & App Store. Next, link your Apple IDs using Family Sharing so you can still share music and apps. Family Sharing - Apple Support

Logic 8 using only one CPU while bouncing

Whenever I bounce a project, Logic 8 uses only one CPU. It also spikes this CPU completely, with the CPU meter going into the red area, which is why I am rather keen on persuading Logic to distribute the load.
Any ideas?
(I've given the support document with tips on how to balance multi-core performance a good read, but it doesn't seem to say anything on this particular subject, and following the advice in the document does nothing to change my CPU load.)

Bouncing is a single core process. Just like rendering is in Final Cut Pro. This won't change until Leopard and Apple's ProApps get better at handling multiple cores.
It's redlining because the processor core is working as fast as it can. Computer processors don't just randomly run slower, they use their resources for the tasks at hand. If it only used 50% of a core, the bounce would take twice as long to process.

Second mac in cluster uses only one core

Hello all. For some reason the second computer in my render farm is using only one core out of eight.
I'm using 2 Mac Pros linked together directly via giga ethernet wire. Mac one is a Quad Core 3ghz. Mac two is a Octo Core 2009 model. Both computers have the same version of FCS3 with different serial numbers.
In the Qmaster preferance pane: Mac one is set to "Quickcluster with services" with the check boxes for Share and Managed next to "Distributed processing for Compressor" checked. 4 instances selected and "Include unmanaged services from other computers" checked. Mac two is set to "Services only" with check box for Share next to "Distributed processing for Compressor" checked. 8 instances selected and "Include unmanaged services from other computers" checked.
I hit submit in Compressor, select the name of the cluster from Mac one, then in the Batch Monitor I see the video divied into 10 sections with Mac one handling 4 and Mac two handling one. On Mac two I see that the cores aren't fired up 100%, more like 30% on average.
I did a test earlier with a dual core mbp, and again only one core. How do I get my Octo core to use all 8 cores?

Solved the problem. The solution was simple, but somehow went under my radar. On Mac two in the Qmaster preferance pane next to the "Options for selected service" button, the selected service was set to off.
Duh

Persisting Multiple Entries using only one form

Hi Everyone,
I have a form on which I am entering phone number and city.
The form prompts the user to enter 3 phone numbers and 3 cities.
My java bean is Address which have two fields phone and city.
How can I bind the Java bean with form so that after submission of form three entries will go in Address table.
Thanks
Ambrish

I already have Address bean but how to use it so that two records will enter using only one form.

How can I adjust the skin color of only one person in the photo (Elements 11)

How can I adjust the skin color of only one person in the photo (Elements 11)?
Thanks for your help.

From your question, I assume you know how to do it for all persons :
Menu : Enhance/Adjust color/adjust color for skin tones
So what you have to do is to do the color correction on a layer copy. Concentrate on the person to enhance and ignore the rest of the picture.
When you are satisfied, add a mask to the layer copy and fill it with black.
Set your foreground color to white
In the layer palette, click on the mask icon on the right of the layer icon.
Then use a brush to paint white on the skin of the person to reveal the correction.

How do i confirm whether it is using only one partition.

Similar Messages

Maybe you are looking for