How do I connect a mac mini to my G5?

Hi I wondered if anybody could give me some advice. I have a G5 at home running CS - the first version. My boss at work has just bought a mac mini for me and I've installed CS4 - the mini is connected to a random HP monitor at work. I wanted to bring the mini home so I can continue work there and I was hoping to connect it the my G5. Does anybody know what components I need to get and how to do it, if it's possible?
Thanks

The easiest way to do this would be over your network - as long as both are on the same subnet, they just simply see each other in the finder (this varies depending on what OS you have. Are both running 10.5) ?
D

Similar Messages

How do i connect my mac mini to a kvm switch using the hdmi to dvi adapter?

I want to connect my Mac Mini using the HDMI to DVI adapter to a KVM switch cable. I have an Iogear KVM switch. The cable from the KVM switch has a male VGA end connection. I have been trying to determine the right adapter to connect the female DVI connection to the male VGA connector. I will be using the Mac mini and a PC running through the KVM switch. This is doable as the iogear switch is compatible with both a PC and a Mac. Any ideas out there? Thank you.

You would need to get HDMI or DVI to VGA CONVERTER, not a simple adopter. The converter requires USP connection for power. HDMI is only digital while VGA is analogue.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812699001&nm_mc=EMC-IGNEFL 070414&cm_mmc=EMC-IGNEFL070414-_-EMC-070414-Index-_-AudioVideoSplitters-_-126990 01-L019B
If your MIni has a mini displayport or Thunderbolt port yu can get a les expensive mini displayport to VGA afopter.

How do I connect my Mac Mini (DVI) to a monitor (VGA) and 2 TV's (HDMI)? What equipment do I need?

I have an older Mac Mini with a DVI out. Right now using a monitor with VGA in, and since my Mini came with the adapter, all is good. However, I'm trying to use this setup to also connect 2 50" TV's that have HDMI's. What would be the proper setup in order to run the mini and the monitor along with the TV's? Thanks!

You need USB to video adopters. See:
http://eshop.macsales.com/search/NWTVIDU

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
     Choose System Preferences from the Apple Menu
     Choose Sound
      In the output tab you should now be able to make the HDMI "Sticky"
      Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

How can I control a mac mini connected to a benchmark dac 2 for the purpose of listening to 24/192 audio files?

How can I control a mac mini connected by USB to a Benchmark DAC 2 for the purpose of listening to 24/192 music downloads?

Hello,
About the dac 1, but may apply to the dac 2 as well in some ways...
Here are more details:
1) The current version of iTunes (7.5) for OSX is very broken. Some older versions work properly, but 7.5 introduces truncation and DSP artifacts that can measure as high as –80dBFS. These levels are easily audible. There is no system configuration that will permit transparent playback from 44.1kHz sources with iTunes 7.5. Curiously, the only format that works properly in 7.5 is 24-bit/96kHz. This iTunes problem has nothing to do with USB communications, as the results are the same when using the built-in optical port on our PowerBooks. As a workaround, we suggest using the free VLC for Mac player. VLC works perfectly with all formats (provided OSX is set to match the sample rate of the files being played). We highly recommend the VLC player for OSX users, and strongly advise against using iTunes. We will attempt to identify which versions of iTunes work and which ones don't. But beware, iTunes updates itself without user intervention. One of our test computers "upgraded" itself to the dysfunctional iTunes 7.5.
2) OSX still does not have the ability to follow sample-rate changes. We consider this a nuisance for most users and a show-stopper for users who want to play a mixed list of 44.1kHz and 96kHz material. An OSX sample-rate mismatch will invoke the very-poor-quality sample-rate conversion that is built into OSX. The iTunes 7.5 bug seems to be locking on this sample-rate conversion at all sample rates other than 96kHz. Until this is fixed, OSX is not the operating system of choice for audio playback.
http://www.stereophile.com/content/benchmark-dac1-usb-da-processor-headphone-amp lifier-manufacturer-comment

How do i connect my mac book pro to the tv to watch videos?

How can I connect my mac book pro to the HD TV to watch my videos on the TV?

Depending on what model of Macbook Pro you have, you can either wirelessly mirror your computer's monitor (using AirPlay, so an AppleTV is required.) You can also buy and HDMI cable and special adaptor for your Macbook Pro so you can wire your Macbook Pro to your TV via HDMI cable.
http://store.apple.com/us/product/HA824ZM/A/belkin-mini-displayport-to-hdmi-adap ter
This is an example of the adapter you might have to buy. The cable/adapter depends on your Macbook Pro model.

How can i get mynew mac mini to use the drive in my old mac pro

When I first got my new mac mini it dosen't have an internal drive. So I hooked it up on the network and fire wire. I could use the superdrive in the mac pro just fine both itunes and the dvd player worked as they would with a internal drive. But now a couple of upgrade down loads later not so much. yes I can connect with screen share and can get the dvd player to play dvd's but still can't get itunes to use the superdrive. Iht exect disk icon in the apple menue bar use to open and close the super drive but now it reads "no disk" How can I get my mac mini to automaticly use the superdrive when i turn on the mac pro.
I've done all the easy things changing the order of start up and share settings and i sware it did work ok when i first hooked it up.

http://www.totalapps.net/mac/remote-disc-sharing-when-the-superdrive-doesn’t-wor k-2/
Mind you, booting off the external optical drive of another computer may not be practical because of the different operating system limitations of the computers. I would just purchase an external optical drive from http://www.macsales.com/ if you find it doesn't work.

Connecting two Mac Minis using wifi

My actual set up:
Bedroom - Macmini (2007) linked to a dsl modem via an ethernet cable. A Samsung display, a LaCie 2tb drive, are also connected to it.
In a very near future:
LivingRoom - Macmini (2011, to be delivered in a couple of days... hopefully) will have access to internet via wifi. A 55" TV, a LaCie Minimus 2tb drive (a clone of the other one in the bedroom) and a DAC will be connected to the new mini.
My question:
How can I connect the two minis together using wifi so that I can have easy acces to all the files in the drive connected to the Mac mini in the other room?
I have looked at the "File sharing preferences" in the system preferences but I am not that sure how to do it.
A little guidance would be greatly appreciated!

"File sharing preferences" is indeed how to do it. Connect both minis to your router (one by ethernet cable, one by wifi, it doesn't matter.)
Then turn on "File Sharing" in Sharing Prefs on both minis. Also, give them both meaningful, different names under "Computer Name".
Then, when you open a finder window on one mini, the other one should appear under "Shared", like this:

How can I fix my mac mini g4 1.5ghz which gets the must reboot message? what is the reason?

How can I fix my mac mini g4 1.5ghz with 2gig ram which gets the must reboot message randomlly? what is the reason? Hard disk has no errors.

Based on your description, you are having a kernel panic.
Can you post some of your crash logs? Might be a clue. See Mac OS X: How to log a kernel panic http://support.apple.com/kb/HT2546
Understanding crash logs isn’t easy and it’s hard (sometimes impossible) to decipher the cause of the problem. Take a look at Apple’s Crash Reporter document at http://developer.apple.com/technotes/tn2004/tn2123.html Also look at Tutorial: An introduction to reading Mac OS X crash reports
http://www.macfixit.com/article.php?story=20060309075929717
Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc (the AHT is on the Install/Restore DVD that came with your Mac)? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
http://docs.info.apple.com/article.html?artnum=106227 What's a "kernel panic"? (Mac OS X)
http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

Is it possible to connect a mac mini OS 10.6.7 to vista PC ??

Is it possible to connect a mac mini OS 10.6.7 to a windows vista or windows 7 PC ?? If so how !

hey try this click on the finder then go to top and click the Go menu then go down to connect to server and put in for example smb://Computer IP address goes here for example smb://192.168.0.6
Good Luck!

How do I connect my Mac Book Pro to a projector I have the adapter but cant get anything on the screen

How do I connect my Mac Book Pro to a projector I have the adapter but cant get anything on the screen

Go to your "screen settings". then chose "find screen" then you vill find the prosjector.
this will probably fix your problem.
if this dont works can it be something wrong with your adapter.
hope it helps

How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can).

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?... or could I chain the the current mac pro to a mac mini to make that happen?

What do I need to connect my Mac Mini to a TV using the S-video jack?

Radio Shack didn't have anything in the store and suggested
that what I needed (something with an S-video connector
at the adapter end and a co-ax/F-connector at the TV end)
would cost $100.
What should I be looking for? I'd like the option to connect
my Mac Mini to a TV (with enough resolution to read text,
which isn't the case with a video-RCA cable), especially in
a hotel room (using the Mac Mini as a laptop!).

The DVI to video adapter
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/6454000/wo/jP1F dznaaoNs2dPRALa1K0FqrB2/3.0.21.1.0.8.25.7.11.2.3>
will give best results using the S-Video. Next best is composite video. If your TV set does not have either of these, you will need a RF modulator to connect to the TV antenna connector. For best results get a modulator that takes S-video. It should cost a lot less than $100.00 Radio Shack has one for $25
<http://www.radioshack.com/product/index.jsp?productId=2103095&cp=&origkw=rfmodulator&kw=rfmodulator&parentPage=search>
No matter what connection you use, a standard TV will not give you better than 640 x 480 resolution, so it will always be hard to read small text.

Connecting my Mac Mini DVI video output to Dell W3706MC LCD TV VGA Input

I tried connecting my mac mini to the Dell W3706MC LCD TV VGA input but it wanted me to change the resolution of the mac to 1360 x 768 at 60 Hz. I did that but it still would not display the video. I tried my PC laptop and that worked fine with different resolutions. So I know that there is nothing wrong with the TV. Did anyone experience this same problem?
Any help would be great.
Thanks,
Karl

I'm confused about your comment "it wanted me to change the resolution of the mac to 1360 x 768 at 60 Hz." I presume the way this was communicated was through a dialog box, correct? But if you could see a dialog box, that means you had a working screen at one point, correct? Why don't you just run at that resolution?

How do I connect a mac mini to my G5?

Similar Messages

Maybe you are looking for