How do I connect af firewire 400 to thundbolt on my brand new imac?

I have a Presonus Studiolive 16.4.2 mixer and need to connect it to my Imac. The mixer has a firewire 400

The suggestion Neil recommends does work. I connect a Flash Card reader to my image that way. Here are the two adapters you need:
Apple Thunderbolt to FireWire 800 Adapter:
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
NewerTech
FireWire 9-pin (FW800) to 6-pin (FW400) Adapter
http://eshop.macsales.com/item/NewerTech/FIR1369AD/

Similar Messages

HT201338 Can I connect a firewire 400 to firewire 800 adapter and then a firewire 800 to Thunderbolt adapter(standard Thunderbolt to firewire adapter) together to digitize video from a miniDV video camcorder?

I have a 10 year Canon MiniDV camcorder that I used to connect via firewire to digitize the data. Now my IMac only has a Thunderbolt connector and my camcorder uses the older firewire 400 standard. I would like to digitize the video into my IMac. How can I do this?

I did a little looking around and found a Thunderbolt to Firewire 800 adapter, and then a Firewire 400 to 800 adapter, but no Thunderbolt to Firewire 400. Amazon and Apple stores had the Thunderbolt to Firewire 800 cable and Amazon had the Firewire 400 to 800 adapater.
Wherever you get the cables, ask them if it will work OK with what you want to try and do - if they don't know make sure you can return if there is a problem. I think it will because the Thunderbolt side is so much faster than what the camera can pump out to it. If it were the other way (Thunderbolt device to a Firewire computer I would expect that to fail since the Firewire could never keep up with the data rate of the incoming Thunderbolt device).
Maybe if you have a local Mac user group or a friend with an older mac with a firewire 400 port you could do it this way too?
Good luck

How do I connect my Samsung Series 8000 plasma tv to my 27" imac

How do I connect my Samsung Series 8000 plasma tv to my 27" imac (2.8 GHz Intel Core i7) to use as a display?

Here you go (no financial or other interest in this web site or company):
http://www.kanexlive.com/iadapt51
I believe we have the same model of iMac (late 2009) in which unfortunately Apple did not provide audio signals in the mini-DisplayPort out port. This Kanex adapter will pick up your audio as well as the DisplayPort signal and combine them in an HDMI signal that you plug into the Samsung HDTV.

How do I transfer music and photos from my Power Mac G5 to my new iMac. Have an old FireWire but it does not fit the new iMac

I am trying to transfer photos, music, etc from my Power Mac G5 to my new iMac. The Power Mac is too old for the migration assistant to help. I have an old Firewire but it does not fit the new iMac. Any suggestions? If a Firewire is the best option which one do I need? Thanks.

You need a Firewire 800 to 400 adapter or cable or a external USB 2/3 drive (self powered) it can default to the old USB the G5 uses 1 or 2.
Format the drive info here.
Backup and restore info
https://discussions.apple.com/message/16276201#16276201

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

How do I uninstall Mavericks and recover Lion? I have a brand new iMac and web pages stall or freeze since I installed Mavericks. I can't get it to download software for my printer when I connect it.

I have a brand new iMac. It was working fine until I downloaded Mavericks. Now I have web pages that freeze while trying to load. The blue in the address bar stalls and freezes. If I try to load from page 1 to a later page, or reverse that, I also have the same problem. I tried to connect my printer for the first time, and again, the blue progress bar froze. Then I got the yellow triangle telling me there was a connection problem. My internet connection is via an Air Card as that is my only option where I live. I packed up the whole new iMac and took it to my Air Card provider, where they also have very fast Wifi, and they had the same problem with Wifi. I use my Air Card with my MacBook and it works JUST GREAT! I really want to return to Lion. HELP.

The only way to retutn to Lion is to format your drive (erase, lose all) and either:
1. clone back the clone copy i hoep you have, or
2. first backup your files, then format and install Lion again
But really, mavericks works great. You have a problem. Find out why. First, what unusual software do oyu have installed that may be conflicting with it? Virus, system modifiers, etc? Second what OLD software do you have that might be the problem. finally, you might need to do a re-install if something errored during install.
Grant

I'm trying to transfer data (docs, emails) from G4 iMac running os 10.3.9 to brand new iMac on 10.8.1 I'm stuck, any help greatly appreciated. (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

I'm trying to transfer data (docs, emails) from an old G4 iMac running OS 10.3.9 to brand new iMac on 10.8.1 I'm stuck, any help greatly appreciated. (Ethernet or wifi networking are both options if I can figure out how to get the machines to communicate.)

AMoriyama wrote:
I have the old machine backed up onto an external firewire disk but can't hook that up to the new imac as I'm waiting for delivery of a firewire 400/800 adaptor - therefore starting the old machine up as a slave is also subject to the same delay.
I was hoping there might be some way to create a network between the 2 machines (and 2 different versions of the OS) to be able to transfer data across immediately but perhaps I'll just have to wait for my firewire adaptor to arrive.
I don't understand why you're buying a Firewire adaptor, since AFAIK both of your computers have Firewire already built in.
All you need is a firewire cable. Connect the Firewire socket on the old machine to the Firewire socket on your new iMac.
Then start the old machine in Target Mode (i.e. by holding down the T key on its keyboard, while it's starting up, until you see the three-legged T icon hopping around the screen of the old machine.)
At that point you will also see a new icon on the screen of your new iMac. This is the hard drive of your old machine. By clicking on it you can navigate through it any way you like, just as you would normally.
Just drag across whatever you want from the old computer to the new one. This will leave everything on the old computer untouched.
- or use Migration Assistant but in my experience, Migration Assistant isn't very reliable and fails to migrate large amounts of stuff.

HELP! brand new iMac froze during firewire transfer and won't start!!!

During my setup for my brand new iMac I follwed the directions and connected my iBook via firewire to transfer my files. I noticed after a while that my iMac was frozen on "45 minutes remaining" and the blue line wasn't wavering a bit, and after over half an hour it hadn't moved. I powered off the iBook, and still nothing happened to the iMac screen--it remained frozen. I went to the guidebook and nothing seemed to work, so I powered off and on again, only to get a flashing question mark. All this and I just bought the darn thing tonight!
Help! Anyone know what happened and more importantly how to fix it?
Thanks.
Lindsay

it sounds like the iBook went to sleep during the transfer or at least it's hard drive spun down.
what you need to know is hope that simply booting from your install DVD will let you repair the iMac's hard drive. You could also try booting holding down the Command S keys on startup and when you get to the Single User Mode command line prompt follow the directions there for running fsck to repair your hard drive.
Do you have a FW hard drive? Can you copy files from iBook to FW and then from there to iMac?
And, it is always nice to have a FW emergency/backup hard drive. The iMac needs a different partition scheme to be bootable from FW than the iBook does, but you can create the proper partition type etc from a Tiger Installer and put OS X on FireWire, then see if you can backup and repair your iMac's hard drive.
MicroMat's TechTool Pro 4.5.1 is now shipping and is compatible, Universal Binary and bootable. Always good to have some 3rd party utility handy.
If you are just starting out, you probably don't have much if anything installed yet, so you may want to just erase your iMac drive and restore to what it was. That would be the easiest if Disk Utility won't repair it.
Instead of powering off the iBook, I would have tried to force quit whatever was running, like Migration Assistant.

HT201250 I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was?

I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was? I want to make sure I will still have various important files on my new computer, like my songs in iTunes, my photos in iPhoto, etc, etc. Thanks so much in advance!

Welcome to the Apple Support Communities
When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html

How to restore machine using a TM backup on a usb hard drive from older imac to a brand new iMac?

My imac (the one that had a superdrive in it), had a broken superdrive and was sent for repair. Whilst being "repaired" the screen was broken. I now have a brand new imac albeit without a dvd drive. My question is how to I restore my the old TM back up which had been made to an external usb hard drive to the new imac. Help files say that I should not restore from a TM file to a different machine and that I should use migration assistant. Whilst I can see the external usb drive in TM it is not being recognised in Migration assistant when I click on back up from a TM backup on another machine or disk.
Any ideas?
Just noticed that this new machine is running OSX 10.8.4 the broken imac was on mavericks

This is very simple first run Software Update on the new machine and get your machine upgraded to the most recent version of Mountain Lion 10.8.5. Install all other software updates Apple recommends in Software Update. Then care fully read Pondini's guide on using Migration Assistant located at:
http://pondini.org/OSX/MigrateLion.html
Your migrated data will be in a new account, to access it log into the new account.
Also DO NOT repeat DO NOTuse Wi-Fi to migrate data, if your TM backup drive uses USB, then connect it via USB and follow the on-screen instructions as described in Pondini's guide.

Brand new IMac can't connect to Internet while using Vista Ultimate

The subject is pretty much it, but basically. We just bought a brand new IMac and I happened to have an old copy of Windows Vista Ultimate lying around and wanted to partition some hard drive space for gaming. During the installation a message popped up that said Lion only supports Windows 7. I went through with the installation and after Windows started I loaded in my old Snow Leopard CD. I installed the drivers and went through the set up. Everything seemed fine, but I am unable to connect to the Internet. I plugged my desktop in via Ethernet to my router but still no Internet. In my device manager there are many devices, including network controller, that have yellow exclamations next to them but I don't know how to update them or where to get the drivers. Any help would be greatly appreciated, and I would be happy to take any steps to relay more information. Thank you!

New motherboard. So unless you can find, and want to mess around, which is why the pdf guide and all the faqs tell you what and how to install, and that only 7 is supported.
Vista SP1 is no longer supported even by MS.
You have Sandy Bridge based system with Thunderbolt, hence it needed new device drivers.
Windows 7 64-bit SP1 Home Premium System Builder is $95

How can I transfer data (iTunes/iPhoto) MacBook Pro (Late 2011) to my brand new iMac 27" - Apple Support couldn't help me and did not make the promised call-back

I have a late 2011 MacBook Pro 13" and bought a brand new iMac 27" last week.
I tried to transfer data (musdic & photos) via Thunderbolt, but i did not run, my system always
tries to transfer data via WLAN, but that would last more than 80 hours.
I tried to get some help from the Apple Support, but unfortunately they couldn't help me.
A promised call-back from the next higher support-level has not been done.
Does anybody know what the problem might be.
The Thunderbolt-cable is brand new.

Instead of using Migration Assistant, the best way is to use the Target Disk Mode, so you will save headaches (Migration Assistant creates a new user with the transferred data).
To do this, just connect both Macs with the Thunderbolt cable, and then, start the MacBook Pro holding the T key, so a Thunderbolt or FireWire icon should appear on the display. After that, go to the iMac, open Finder, and the hard drive of the MacBook Pro will appear on the Finder sidebar as an external drive, under "Devices". Just access to it, go to the folders with your iTunes and iPhoto libraries, and copy them to the iMac

Establishing a connection with Facebook on my BRAND NEW iMac

I cannot get the Facebook page to open. Safari tells me that it cannot establish a connection with facebook.com! What is up with this. I have a brand new iMac! How do I fix this?

Are "Parental Controls" set to block Facebook?

HT4889 How can I transfer my iPhoto photos and iTunes library to my new iMac?

How can I transfer my iPhoto photos and iTunes library to my new iMac?

If the Migration Assistant won't do it, move them over as you would any other folder; they're located in the Pictures and Music folders of your home folder by default. The iPhoto library needs to be transferred via a drive, partition, or disk image formatted as Mac OS Extended or through an AFP network share.
(72915)

Vmware fusion 5.0.2 cannot connect to network on my brand new iMac '27 late 2012

Dear friends,
I have tried to install Windows 8 (x64bit) Pro., Windows XP, and CentOS 6.0 using vmware fusion 5.0.2 over my brand new iMac '27 late 2012. However, neither one can connect to the Internet. There was no problem with the same installation on my iMac 2011.
The network board recognized by Windows 8 is Intel(R) 82574L Gigabit Network Connection.
In the folder of vmware fusion's setting files on Mac OS, I found a file called Windows 8 x64.vmx, and
there is a line as follows.
ethernet0.virtualDev ="e1000e"
Any friend has the same problem or can give me some hints?
Thanks a lot!

Suggest that you post your question here

How do I connect af firewire 400 to thundbolt on my brand new imac?

Similar Messages

Maybe you are looking for