How do I connect air print to my Samsung SCX-3405W

How do I connect my Samsung SCX-3405 to Apple Air Print

If the printer is not AirPrint compatible, you need to use a 3rd party printing app to make it so. If Samsung does not provide such an app for this printer via the iTunes app store, there are a number of 3rd party printing apps available via the iTunes app store.

Similar Messages

  • How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

    I have two printers installed on Windows Server 2008 R2 (64-bit):
    1. Samsung SCX-4521f
    2. Samsung SCX-4300
    There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
    The drivers installed are as follows:
    SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7    3.04.96:03    Print Driver    11 Dec, 2009    12.37    MULTI LANGUAGE)
    SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
    After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
    On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
    The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
    The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
    Neither will print a test page.
    Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
    The error persists and nothing will print.
    When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
    "Printer: Error" and "N document(s) in queue".
    Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
    As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
    Once all the jobs are cleared the printer information says "Printer: Ready".
    Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
    With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
    However, I can't see any specific error messages.
    How do I find out what exactly "Needs troubleshooting"?
    Please can anyone advise further?

    The printer (SCX-4300) has stopped again.
    Since it has been stopped I have done your recommendations:
    Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
    Set the "Interactive Services Detection" to Automatic and started it.
    Unfortunately the printer did not start printing, the print jobs did not restart or delete.
    I decided to check the Operational logs that we enabled.
    The first job I see goes like this:
    Information: Rendering job 41.
    Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
    Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
    sandbox). Win32 error code returned by the print processor: 0x0.
    Information:Printing job 41.
    Information:Spooling job 41.
    This job actually printed.
    Other jobs printed fine with no error.
    There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
    Any ideas what to try now?
    Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

  • How can I connect my printer without air print

    How can I connect my printer without air print to my ipad mini?

    Maybe.
    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • How do you connect hp printer to macbook?

    how do you connect hp printer to a macbook?

    hp makes HUNDREDS of Printers.
    Apple makes dozens of current Macs.

  • How do i connect my printer to my Pad and Phone

    how do I connect my printer to my I Pad and I Phone

    Hi,
    Firstly please check to see if your printer in the list:
    http://support.apple.com/kb/ht4356
    If YES, you can use these to fix
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    iPhone: http://www.apple.com/support/iphone/assistant/airprint/
    If NO you have to print using other apps (if applicable) such as
       http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8
    More info from this:
      http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
    and this:
      http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can't print from my Samsung SCX 4720

    After the last upgrade I lost all ability to print from my Samsung SCX 4720 (I have never been able to use the scan function with my, but at least I could print). Since Samsung doesn't have a Mac version for this printer, I used the generic Samsung SCX 4x20 driver and it worked fine so far. Additionally, I have lost any ability to add other printers, manually or automatically. The printer list has just been wiped clean. I tried copying the printer settings from my time machine backups, but to no avail. Does anybody have a suggestion?

    Samsung has downloadable drivers at: http://www.samsung.com/us/support/owners/product/SCX-4500W
    On edit: just noticed that link is to the scx-4500W and I'm not sure of the difference between that and the scx-4500; their scx-4500 page only has drivers for OSX through 10.7:  http://www.samsung.com/us/support/owners/product/SCX-4500/XAA?

  • Epson BX305FW PLUS how to connect air print to this printer  thanks

    Help for air printer connection

    Check here to see if it's compatible http://support.apple.com/kb/ht4356
    airprint setup and troubleshooting http://www.apple.com/support/iphone/assistant/airprint/

  • Don't know how to use the air print with my ipads.

    i just bought an mg3222 printer and i don't know how to figure out how to use air print with my ipad and ipad minis. Can anybody help??? Thanks

    Hello.
    In order to use the printer with your iOS devices, please make sure that the units are all connected to the same WI-Fi router.  Once this has been done you should be able to print.
    The initial Wi-Fi setup of the MG3222 would have to be done from a compatible Windows or Mac OSX computer.
    If additional assistance is needed, feel free to call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do i connect my printer to a network on my computer so i can printer regular documents?

    i have an eprint d100 printer. i cant print anything because the error message saids that im not connected to a network. i need to know how to get connected to a net work. NOTE i do not have a connection disk.

    OK, you have two choices to connect your printer to your PC:
    1. USB cable - this is the simplest, however, you will have to plug in the USB to be able to print.
    2. "Ad hoc" wireless.  This is a wireless link between your printer and your PC.
    Let me know which one you want to use.  In the mean time get the latest software for your printer from the "Support & Drivers" link at the top of this page.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How do you connect air to a projector

    How do you connect the air to a projector, what cable do you need.

    It depends on what type of connector the projector has, but basically you will most likley need a Mini-Displayport to HDMI, VGA or DVI connector.  With that you should be able to use a "standard" cable from the projector to the computer.
    As I recall, Amazon also stocks a Mini-Displayport to HDMI cable that would be a single cable--but it would require a projector that will take HDMI input.  Many newer projectors have that connection, but older ones will not.
    If you are hooking to multiple projectors the VGA option right now is the one that will work in virtually all cases--even if the projector has another connector, it almost always has a VGA connection to deal with older laptops.

  • How can i connect my printer to my computer without any chords

    Help me connect my printer to my laptop please

    You need to provide us at least what printer you have and what your other equipment consists of.
    Did you read your printer's manual for instructions on how to set it up?

  • Hpenvy4500​printer How do I connect my printer to anetwork?

    Instructions say slow blinking light indicates wireless is on but the printer is not connected to a network.  What do I do to fix this?

    Please explain exactly how you are installing the printer including all steps followed in the manual including and CD setup instructions. 
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How do i connect my printer to photoshop elements 13?

    When i first installed photoshop everything was fine but for some reason its telling me that i have to connect my printer to the program. How do i do that? I have a wireless printer.

    Check the network/router.
    What happens when you attach the printer by cable to the computer via USB? Is it broken?

  • How to down load air print?

    How can I down loos air print to use on my IPad?

    You don't download air print. It's part of the operating system. But it's a part you can only use if you have an air print enabled printer.

  • How do I connect a printer to my TimeCapsule via ethernet cable?

    My printer doesn't have a USB connection, nor does it have built in wireless.  Just ethernet.  How would I connect it?  Just plugging it in doesn't seem to work.

    I have the feeling TC is not prepared for such an action, those eth ports are for connecting other macs / PCs via eth cable, i.e. those not having wl. Printing is via USB, as long as I correctly remember the instructions. I have a similar Apple device, the Airport Extreme, which is identical to TC, just it has no disk inside.
    It is not clear why you purchased such a printer before clarifying connection method.
    Perhaps others may jump in for help.

Maybe you are looking for

  • Playing quicktime movies in Keynote 3

    Hi, Is it possible to place two or more quicktime videos on a single keynote slide so they show without all simultaneously playing? I want to be able to click any of the videos so they play independently. I have tried various workarounds without succ

  • Monitor static

    the static are stationary lines on the screen that flicker. i don't really know how to describe it, but it's not like a tv type of static. this only happens in resolutions higher than 1280 x 768 60hz, but doesn't happen on any lower resolutions even

  • New to LDAP

    hi, im working on a login application , that is in struts and i have to use LDAP in that ... i m very new to LDAP....i dont know anything.........pls can any one help me.? can u pls give me one simple code example of LDAP. thanks

  • My artwork is not showing up.

    All my songs are fromm itunes but when I updated my iphone all the artwork is missing how do I get it back on?

  • Weblogic Producer and Sun Portal as Consumer

    Hi, I am trying to have Weblogic 8.1SP4 as a producer and Sun Portal 2005Q1 as consumer. I have deployed my JSR 168 compliant portlet application on Weblogic. When i try 2 register a WSRP consumer in Sun Portal using the WSDL URL generated by Weblogi