How do I connect an HP printer via Linksys printserver to a wireless network

Hi:
I have an HP laptop running Windows Vista 32-bit Home Premium.
It is connected wirelessly to the Internet via a Motorola SBG6580 cable Gateway.
I have an HP C6280 All-In-One printer/copier/scanner: wireless is not built-in.
A Linksys WPSM54G Printerserver is connected (hardwired) to the printer.
Currently, the printer is connected to the laptop via USB cable, and I am able to print.
(Previously, my wireless network connectivity was via a Linksys WRT54G router,
along with a modem. These were replaced with the Gateway.)
How do I setup wireless connectivity between the Printserver and the Gateway ?
I am not very network savvy (yet) , so I am not familiar with wireless connectivity details.
Any ideas ???
Thank you
DaleBr

From what I can tell you need help connecting the Linksys printer server to your network. Linksys has good instructions for the configuring the printserver. I've linked that site.
After the printer server is on line you might need to change the printer driver setings to reflect the new settings. A driver software reinstall should do that.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

Similar Messages

How do I connect a MacPro without an airport card to my wireless network

I have a MacPro that does not have an airport card. I have a Verizon FIOS wireless router. I connected my time capsule to the router with an Ethernet cable and my MacBook Pro has no problem connecting to the network. I placed my airport extreme upstairs in my office and joined the wireless network. I connected my MacPro to the airport extreme with an Ethernet cable but I cannot get on the Internet. It says the Ethernet has a self assigned IP and cannot connect to the Internet . What am I doing wrong?

KT4ever.
To add to what Bob said, I've drawn out (on a sheet of paper) what you have described in your initial post, it seems you have an Airport Extreme 'connected wirelessly' to the Verizon wifi router? is that correct?
IF so, your Mac Pro's network settings should be set to DHCP via ethernet? I'm presuming that you can connect your Macbook pro to the Verizon Wifi using a local DHCP IP address automatic network settings right ?
Providing you can see the Airport Extreme 'upstairs' your Mac Pro should connect in exactly the same manner.
Does your Mac Pro have a valid IP address ?
If you can't get the Airport Express to 'connect/talk' to your wireless router, I would ask if you're using WPA/WPA2 secured network keys or an Open unsecured Network? the airport express probably wants the Wifi Key to 'handshake' with the wifi router you have.
http://store.apple.com/us/questions/product/MC340LL/A?aid=www-naus-qa-airportext reme-aos00001&cp=qa-airportextreme-aos00001 - this may help.
If all the above are correct, you should be able to go into finder and 'see' the Airport Extreme And TimeCapsule, and laptop (if u have it connected), as well as your Mac Pro- if it all works right and sharing is turned on those devices.
First start by trying go into Aiport Utility in Applications > Utilities (or via finder) and see if the util can see your airport Extreme - using ur laptop ideally ) and try and get your Wireless extended.
Rgds
dan
Message was edited by: MisterHugh

How do I connect my mg5250 printer via wifi to my mac

HI
I have set up the wifi option on my canon mg5250 but have no idea how to make this work on my mac. I have looked at various web sites but just cant understand how to follow the instructions.

Hello Stapler, I know how you feel I got frustrated with very same issue months and left it in the too hard basket. worked it out today with the help of your posts.
Make sure printer is turned ON first and WiFi is lit up on front face.
GOTO print fax button in System preferences.
in print screen you will see a printer list on Left hand side of printers you already use including status of each.
AT The BOTTOM LEFT of this square you will see a   + -   button
Press the + button
This will open another window labled ADD Printer, with Default, fax, IP and Windows across the top.
In the Default page you will see another list of printer choice options, ( printers available to you )
press - select - the canon MG 5250 series_46698D000000     (your numbers may be different) and you will also see under the Kind heading on Right hand side it will say "canonijnetwork"   ( This is what gave it away to me )
Then press ADD
Then go to document and press print, Command P
and in Printer selection, press up down arrow and your new priner should be in there.
selct it and Press Print, then Wollah, your document should be printing and it should show up in the print queue.
       So the secret is that you will actually have TWO MG5250 printers in your printer option list. A ISB version and a WiFi version with long number beside it.
I hope this helps.
Keep up the good work everyone who contributes GREAT Answers to this Forum, I have learnt lots from it. Thanks Team MAC.
Cheers from Jason
Can anyone tell me how to add screen shots into these comment screens please, is it easy??

How can I connect my macbook pro to printers on my windows wireless network, How can I connect my macbook pro to printers on my windows wireless network

My Macbook Pro running lion 10.7.2 is connected to my wifi network, which also has a PC, an hp photosmart and an hp laserjet connected to a server.
I have been able to set up printing from my mac to the photosmart by entering the ip address, although it can be tempremental.
The problem is that I cannot even find the HP Laserjet on the network at all and cannot link up to it to print.
Any ideas??

Look in the printer manual for instructions.

How to fix connection error on facebook via iphone 4s

How to fix connection error on facebook via iphone 4s?

I had the same problem for days. I reset the phone bu holding down the home button and the on off switch together. Don't swipe to turn off. Just hold down the two buttons until phone switched off then wait a few seconds and switch it back on. I can't also use Facebook on safari which I was also having problems with. Hope it helps

Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

Dear Community,
how can I connect SCSI tape recorder via USB to iMac ?
Is there any adapter/converter on the market now ?
Cheers, Marek

Thanks Jan.
Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
Best regards,
Marek

How do I share files between computers (mac's) on the same wireless network?

How do I share files between computers (mac's) on the same wireless network?

Turn on File Sharing in System Preferences - Sharing, then you should be able to see them in the other Macs' Finder sidebars (under Shared). Click on them, click Connect As, and log in with the user credentials you're sharing from.
Matt

Connecting my Sony BD player to my MacBook Pro wireless network. It sees the network but it then asks for a WPA security key. Where do I find this key?

Connecting my Sony BD player to my MacBook Pro wireless network. It sees the network but it then asks for a WPA security key. Where do I find this key?

Hi Michael,
It sounds like your router's authentication is set to WPA and thus where the key is established. Does your MacBook Pro connect to a wireless router? If so, that's where you'd need to get the key from via a web-based control panel for the router or if it's an AEBS via AirPort Utility.

My ipad2 recognizes my hp c410a printer (which supports air print) but nothing prints. Printer is set up on a wireless network. Printer sees, nothing prints.

My ipad2 recognizes my hp c410a printer (which supports air print) but nothing prints. Printer is set up on a wireless network. Printer sees, nothing prints. Any thoughts?

The router is a Linksys WRTU54G-TM. The Ipad recognizes the printer and spools the print job but there is no action at the printer. E-Print works.

Connecting MacBook to printer via wireless network

I have a wireless network via cable modem with some PCs attached and a printer but am having trouble connecting my new MacBook to the HP LaserJet 2100 printer via wireless. I do not have airport express and not sure I need it to have the MacBook print to this printer. Please advise.

Hi topgunner,
How is the printer connected? Are you trying to share it via a PC through wireless? Or is it connected directly to a router/hub that is enabled for printer sharing?

How can I connect to my printer directly through ethernet?

I have a Lexmark laserjet printer that's connected directly to my eMac's ethernet connection. I also have a third party usb wireless LAN adaptor that connects to my room mate's old airport to provide internet to me.
I can't find a setting with my Network Preferences control panel that allows the usb device to bring in the internet while the printer is connecting to my ethernet connection. I would think that usb device would connect through TCP/IP and the printer would connect through AppleTalk via ethernet connection. But I seem to be able to only do one or the other but not both.
I would like to find a Network setting that allows both connection to happen simultaneously.

I do not see your printer listed here:
About AirPrint - Apple Support
You need to buy the right printer.
The iPad uses a print technology called AirPrint. Airprint is a particular communication protocol that flows over WiFi. So, having a WiiFi printer isn't sufficient. The printer needs to be of an Airprint variety of WiFi.
which I can't connect to laptop either.
I'd contact epson.
Once you get the printer working, you can...
printing to a non-airprinter from an iPad
To print from the iPad, your going to have to install some more software:
-- install a printer app on the ipad. many printer makers have iPad applications for their printers. Look in the app store
-- install enabling software on a computer which you have connected the printer
For a comprehensive list of links,
   see Texas Mac Man list:
     https://discussions.apple.com/message/21291967#21291967
   or
     http://ipadhowtouseit.com/ipad-printing/

How can I connect to a VPN via PPTP?

Hello,
I am a foreigner living in Taiyuan, the capital city of Shanxi Province, in China. I bought my macbook the summer of 2006. It still works perfectly except I cannot connect to the internet here at the university.
The internet here is split into two parts: local, and international. The ethernet connection allows me to access Chinese websites, but nothing else. It sounds counterintuitive but really, that's how it is. In order to get the rest of the world, all computers have to connect to a VPN via PPTP. Once this is established, viola, you have internet.
My problem is I cannot seem to connect to the VPN. I have used Internet Connect, I have created a VPN via PPTP, and put in all the right numbers...
the VPN IP is 202.207.128.115
the username is tyut
the password is tyut
But when I try to connect, it just says it can't. Nobody at the university has been helpful because they've never used a Mac before, and besides which, they aren't used to using a computer in English.
Can anyone help me? Or does anyone know how to get in touch with Apple Services in China (in English)?

Yeah, but that's not the problem here. I'm an English teacher at Taiyuan University of Technology (the irony does not escape me). The other teachers have PCs and can get full internet in their apartment. Since I have a mac, it's much harder for the school technicians to help me.
This is what my log says from the VPN connection (which does connect now.)
Mon Oct 29 16:05:52 2007 : PPTP connecting to server '202.207.128.115' (202.207.128.115)...
Mon Oct 29 16:05:52 2007 : PPTP connection established.
Mon Oct 29 16:05:52 2007 : Using interface ppp0
Mon Oct 29 16:05:52 2007 : Connect: ppp0 <--> socket[34:17]
Mon Oct 29 16:05:52 2007 : local IP address 172.30.1.252
Mon Oct 29 16:05:52 2007 : remote IP address 172.30.1.2
But I still can't load any pages from the VPN connection, just the regular ethernet connection (local internet). It doesn't work if I use IP addresses instead. :-/ I unselected "send all traffic over the VPN connection" because if it's selected, I don't even get local internet.
Looking online I found a possible fix, but it's for Windows XP. I don't know how to find the same settings on the Mac...For Windows XP:
1. Click Start -> Control Panel
2. Click on the Network and Internet Connections icon and then click "Network Connections". If your Control Panel is in classic view, simply double click the "Network Connections" icon.
3. Right click on the new VPN connection and select Properties
4. Select the "Networking" tab
5. Verify that Internet Protocol (TCP/IP) is highlighted
6. Click on the Properties button
7. Within the Internet Protocol (TCP/IP) properties window, click on the "Advanced..." button. Within the Advanced TCP/IP Settings window, REMOVE the check mark next to "Use default gateway on remote network"
8. Click "OK" to close all open windows
Where would the "default gateway on remote network" be on a Mac?

Problem connecting laptop to printer via wireless connection

I installed my HP Photosmart D110 series and the printer is not detecting my wireless internet (which is a Verizon Wireless card) . I only know the basics when it comes to computers, internet, etc. Therefore, this might be a completely stupid question, but is it possible to connect only through my Verizon card or do I need to purchase a router as well?
When I print my Wireless Network Test Report from my printer it tells me that it's recommended to change my network name to make it unique? I have no idea how to do this. And is it even applicable here?
I would greatly appreciate some feedback here.Thank you!

OK,
1. On the printer: Setup > Network > Reset network Defaults
2. On your PC, go to Start > Control Panel > Network and Sharing Center. Look for a wireless network that starts with 'hp" or "HP". Join it. There is no password. On the printer: Setup > Network > WIreless Network Test.
3. Now, in Start > Control Panel > Printers, Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's host name (found on the printer's network configuration report the generated above). Click Next.
If you get a message about Additional Port Information Required, then the printer was not found using the host name. You can go back and retry or using the printer's IP address instead of the host name.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Make a choice and click Next.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How Can I connect Epson R2880 printer to iMac Lion wirelessly

Can i do this with USB Bluetooth adapter, do I need a special adapter for mac. well whae do i need . printer in next room

HellO:
I do not have an Epson printer. However, I did look at their web site. It "appears" that the printer has no built-in wireless connectivity. However, I "think" you could set up a little wireless network with an Airport Express (see description on this web site). Do some research before you spend any money.
Barry

HT4356 How can i print from my iPad without any wireless network?

I develope bids on my iPad out in the field (where a wireless network is hard to find) and I need to print it from my truck to deliver to my customers.

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How do I connect an HP printer via Linksys printserver to a wireless network

Similar Messages

Maybe you are looking for