How do I connect DVI to Scart (or S-serial) on my Sony WEGA?

Does anyone know how I can connect my MacBook Pro (with a DVI socket) to my Sony WEGA TV. The TV has both Scart and S-serial video (plus the red and white audio sockets).
Many thanks,
Richard

If it's an older Mac with DVI Output then you need something like:
http://store.apple.com/us/product/M9267G/A?fnode=MTY1NDA3Ng&mco=MTAyNjUwNA
If it's a newer Mac with the mini port you're going to need two adapters such as:
mini displayport to VGA http://store.apple.com/us/product/MB572Z/A?mco=NDY5OTAzNQ
then VGA to S-Video http://www.amazon.com/TV-Out-VGA-S-Video-RCA-Adapter/dp/B000S675JU

Similar Messages

  • How can I connect to sun fire v125 with serial mgr port by hyperterminal

    Hi there!
    My c.o. got a sun fire v125 server.My mission is finish setting up the server.But as I followed the sun
    fire v125's document, it aint be connected to this server with serial mgr port by using windows xp hyperterminal .
    My step as:
    step1. Find the original RJ45 net cable from the v125 box, and put one side into
    Serial MGR Port of V125.
    step2. Combined the RJ45 net cable's other side with DB-9 converter,
    then plug the DB-9 converter into the PC's serial port(9 pins).
    step3. start the pc(windows xp sp2), and then creat a hyperterminal link in COM1 as:
    Bits/Sec--9600, DataBits--8, Parity--None, Stop bits--1, Flow control--Xon/Xoff
    And then pause connect. make it hang up.
    step4. push the sun fire v125 power button. after 1mins, resume the hyperterminal,
    connect to the v125.
    as above all is all my step here. Somewhere incorrect?if theres no problem, why can't I receive the
    "sc> " promote?
    Theres only one thing what i can do is input from keyboard....?
    I had known that there will be promoted the "sc> " after you start the connection of hyperterminal with the correct steps?
    BTW,I had input "#." with enter key, but it doesnt work!
    Is there anybody met this problem as mine? Or can you give me some hits?
    Thank you for your reading.
    Sinceley Regards
    Maqintoshi. 2008.2.7 pm4:10
    Edited by: maqintoshi on Feb 6, 2008 11:51 PM

    Im sorry for replying so late.
    I'd solved it long time ago.
    finally I found I made a mistake that I connect the Serialport Cable which came from PC
    to the RJ45(NIC) port which came from Sun Server :-@
    If you still can not get the prompts, check these parameters of your hyperterminal:
    connect a terminal or a terminal emulator (PC or workstation) to the SC serial management port.
    Configure the terminal or terminal emulator with these settings:
    * 9600 baud
    * 8 bits
    * No parity
    * 1 Stop bit
    * No handshaking

  • Mini-DVI to SCART... HOW?!?!?

    Hey all,
    My question is pretty straight forward, I have searched the forums and not been able to get a straight forward answer.
    How do you connect a macbook to a television that only has SCART connections? Basically i need a Mini-DVI to SCART cable. These seem to not exist?
    If anyone knows how to connect Mini-DVI to Scart please help. Will this also give me full colour and sound?
    (P.S I also have those 3 little red/white/yellow jack inputs at the side of my tv if thats any help... not sure what they are called?)
    Thanks for your time reading this problem,
    Steve.

    (P.S I also have those 3 little red/white/yellow jack inputs at the side of my tv if thats any help... not sure what they are called?)
    They are called composit video input.
    I answered your other post without the knowledge that you have a composite video input. This changes everything. Forget everything in my other post.
    Here is the easiest way to do this. Get a mini-dvi to video adapter. Then you need an RCA cable. Yellow is usually video input while the red and white are sound. You also need to pick up a 3.5mm to RCA audio Y cable. This will allow you to get stereo sound. Example of 3.5mm to RCA Y cable
    Message was edited by: First Magus

  • Recently I bought a mini DVI to HDMI converter  from eBay for my iMac 21.5 Mid 2011, but only later I realised that it does not have the mini DVI port in that. How can I connect my iMac to a LG smart TV through a HDMI cable?

    This is the picture of all the ports from my iMac
    This is the mini DVI to HDMI converter which I bought from ebay. And I have the HDMI cable to connect it to my TV
    Could anyone please suggest me a solution how I could connect my iMac to the LG smart TV? Also I need to know if this transmits the audio as well to the smart TV?
    Suggestions are welcomed. I really appreciate and thank you for your time

    I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
    You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404

  • How can I connect my Mac Book Pro (year 2008) to the TV set through  HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

    How can I connect my Mac Book Pro (year 2008) to the TV set through  HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.

    I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
    http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
    Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can).

  • How do I connect my Cinema Display to my MacBook Pro???  I have the dvi to vga display port thing and nothing works.

    How do I connect my Cinema Display to my MacBook Pro???  I have the dvi to vga display port thing and nothing works.

    What model (year) MacBook Pro?  Depending on the model, it may have DVI, mini DisplayPort, Thunderbolt, or HDMI video connectors.
    What model (yeasr) and size (17", 20". 22" ...) display.  Depending on the model, it may have ADC, singlre-link DVI, dual-link DVI, or Mini DisplayPort connectors.

  • How can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I have ask this question in the local shop but they could not answer me - how can i connect  apple hd cinema display 30-inch DVI to my new notebook with HDMI port

    I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
    Thanks.

  • I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

    I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all?  I read where on a PC they would work together, but on a MAC they do not.
    I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
    When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one.  I did not think there could be a difference.
    Mainly want to use it for CS6 and LR4.
    How to proceed??? 
    I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI.  Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
    Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
    As a last resort I could sell both and get a 5870.  That would work, I'm sure of that, it's just that I wanted the better graphics card.
    Thanks,
    Bill

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • How can I connect my new 11" air by thunderbolt to my DVI-D monitor?

    How can I connect my new 11" air by thunderbolt to my DVI-D monitor? I have seen mini-display to dvi-d, but am unsure that this will work with thunderbolt port?

    With a Mini Display Port to DVI adapter. Mini displayport and TB are one in the same.

  • How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

    Composite is analogue with one connector. That is why it is called composite
    Component is analogue with three connections. I think one for each color
    Here is the one for component. I misread composite for component
    http://www.amazon.com/DVI-I-Component-DisplayPort-Female-Adapter/dp/B003OBOJC2

  • How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

    How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
    This does not have an HDMI port but does have:-
    1) S-Video I/P,
    2) Video I/P,
    3) Audio Input (Left & Right)
    4) Audio In jack (for VGA and DVI source)
    5) DVI input
    6) VGA input

    Welcome to the Apple community.
    The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
    You may well wish to make sure that the DVI connection works before spending any money on a DAC..

  • How do I connect an external monitor to my MacBook Air?

    How do I connect an external monitor to my MacBook Air?

    With a minidisplay port to VGA or DVI or HDMI adapter:
    http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter?fnode =53

  • How do I connect my MacBook Air 2011 to a projector?

    How do I connect my MacBook Air 2011 to a projector?

    It depends on the input connection for the projector, but since many are rduced resolution, VGA seems to be the prevalent common connection.
    It's just a matter of buying the adapter that adapts VGA to the Mini DisplayPort/Thunderbolt port on your Air. If it is a DVI or HDMI connection input on your projector, the online Apple Store carries that as well.
    This adapter and sufficient length VGA cable is all you need for VGA.
    Here's the DVI adapter.
    For some reason, I am unable to bring up the Moshi HDMI adapter on Apple's site.

  • How I can connect MBP early 2010 with a TV by HDMI

    I have a MBP early 2011, with a Firewire 800 conecction, a thunderbolt conecction an 2 USB 2.0 Conex, so how can I connect a hdmi tv with my MBP, because my old DVI cable can´t connect. I don´t know if the miniDVI can connect in some port I have.
    Thank You

    True but read beyond the title to his question, says 2011 and a TB port.  I guess it's which one you want to believe...

  • How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

    How can I connect my iMac to a TV for playback of videos? My TV does not have HDMI.

    You need to find out what video out you have on your iMac, and what kind of video inputs there are on your TV.
    It will help to know exactly what model iMac and exactly what make/model TV you have.
    Depending on the exact model iMac you have, it may have miniVGA, miniDVI, miniDisplayPort or Thunderbolt output.  Your TV may have composite, S-video, component, DVI, VGA or HDMI inputs.  Once you confirm what kind of ports your iMac and TV have, then we can probably suggest the correct cable or adapter so you can connect them to each other.

Maybe you are looking for

  • Syncing iTunes Library between multiple user accounts

    Is it possible for iTunes to automatically sync music libraries between two user accounts on Windows XP?

  • File Structure with iTunes on an External Drive

    This is an image of the file structure on my external drive that holds all of my iTunes music: Is this correct, or should I have set it up differently? I am asking since it is differnet the the iTunes file structure on my MacBook Pro and some files w

  • FI-Accounts Papyable-Document Parking!

    Dear All! I have configured the following in the system for posting of parked document. 1-Workflow variant-4000 2-assigned to company-4000 3-Release Approval Group 4-Release Approval Procedure 5-Slected the Sub Workflow WS10000052 (Standard) 6-Create

  • How can I store movies in the cloud and access them from my devices?

    Hello, I would like to store movies in the cloud and access them from my device without having to download them to the device because there is not enough space on the harddrive to store them on it. How would I do this? Would I have to download the mo

  • Help required for dynamic quarter calculation

    I have a requirement, where the user will have the liberty to choose his self defined Quarter and the report output will be grouped based on what he selects. The data in the table is at daily grain. So ,if the user selects date as 1st April and numbe