HOW DO I CONNECT F380 TO OSX 10.8.5?
Hi, my mac mini with osx 10.8 recognize the printer but sodent stamp, and the light of printer flashes error. I try to find drivers etc but do not find.
Thanks
Hello Rubs18,
Welcome to the HP Forums.
I see that you are having an issue when attempting to connect the printer to your Mac 10.8 operating system.
Just so you are aware, no full feature software and driver package is available for the 10.8 operating system.
I suggest that you try the HP Printer Drivers v3.0 for OS X.
If you have any other questions or concerns, please feel free to write me back at any time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP
Similar Messages
-
How can I connect MacBook Pro OSX 10.5.2 to G3 Lombard (bronze) OSX 10.1.5?
Can anybody please tell me in simple terms how to connect my MacBook Pro OS X 10.5.2 to my G3 Lombard (bronze keyboard) laptop OS X 10.1.5 so that I can share files. I wish to drag files from the old G3 computer's hard drive into the hard drive of the new MacBook Pro as well as search the old hard drive from the MacBook Pro. I have an ethernet crossover cable as well as regular ethernet cables. Can I connect the computers directly, or should I disconnect my Linksys router from the modem and connect the computers through the router via ethernet?
I have tried both ways, and failed. However, I think I need clear instructions in how to share under both OS X system versions, to set a file's permissions (in both OS X versions), how to set the firewalls (I have Norton Personal Firewall in the G3 and the OS X firewall in the MacBook Pro), how to see the hard drives of the other computer, and how to set anything else properly, as well as any detail that will make this easy to do properly.
Finally, I need to be able to return the settings of the MacBook Pro back to secure settings that will allow me to connect safely when I take it to work and connect to the ethernet network there. Thank you for your help.
Sincerely,
Wilsonconnect the computers through the router via ethernet
Both these computers are capable of File Sharing using IP. Only Macs running 10.3.9 and earlier can use AppleTalk File Sharing. Rendezvous/bonjour can help you on the later 10.5 Mac, but may not be too helpful on the 10.1.5 Mac. So you may need the IP address of the 10.1.5 Mac to connect to it.
On the Mac to share its files:
System Preferences > Sharing > Services
check "Personal File Sharing" AND
System Preferences > Sharing > FireWall
check "Personal File Sharing" to let that traffic come through.
I expect it is similar for Norton FireWall, but Norton has such a \[well deserved] rotten reputation, and has pretty much pulled out of the Mac market, so help on this may be hard to come by.
On the \[10.5.2] Mac that wants to mount the Shared Volumes:
In the Finder, Go Menu, select "Connect to Server"
Select your 10.2.5 Mac in the window that opens and click connect. If it is not seen, you can browse for it or specify its IP address.
You get a login Window. Login using an ID \[from the 10.1.5 Mac] that has Permissions to read and write the files you want to share. The drive(s) or Folder(s) you specified will mount as network Drives on the desktop. Drag and drop files in both directions to your heart's content.
N.B.: If you choose "Guest", you will have access to the "Shared" folder ONLY.
You have made no changes or compromises to your 10.5.2 Mac, so no Undo is necessary to take it back to work on Monday.
Message was edited by: Grant Bennet-Alder -
How do I connect my Imac OSX 10.9.4 to my HP Laserjet IIIP printer ??
Hello,
I own a very old HP Laserjet IIIP printer which is still very good and I would like to install it on my Imac OSX 10.9.4.
Can you please help me to find the Drivers ?
Many thanks.
GiogioHi Giogio, and welcome to the HP Forums.
I am sorry to be the bearer of this news, but do the age of the printer, it is not supported by Mac OS X 10.9. I am including a list below of the supported printers from Apple:
OS X: Printer and scanner software available for download.
For more information, I would recommend contacting the Apple Support Communities.
Thank you for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX
Did you try to hook up both monitors to the Belkin adaptor? Trying will determine if your monitor has a bad input port. See if the Belkin adaptor is the problem. I have never used that specific adaptor, but I have always had luck with the Dr. Bott's DVI for ADC adaptor. Best of luck.
www.drbott.com -
How do I connect my 2013 macbook pro to apple tv
How do I connect my 2013 Retina Macbook Pro (OSX 10.9.5) to my new Apple TV? When I try, I keep getting a "Cannot connect" message.
Welcome to the Apple Community Mary Ann.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button. -
Dear Community,
how can I connect SCSI tape recorder via USB to iMac ?
Is there any adapter/converter on the market now ?
Cheers, MarekThanks Jan.
Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
Best regards,
Marek -
i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me
If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
How can we connect mac air and iPad to share all documents and downloads
How can we connect mac air and iPad to share all documents and downloads?
If you are referring to the "Documents" and "Downloads" folder in OSX, I suggest using https://www.dropbox.com
-
How to wirelessly connect MG3120 to macbook pro
How to wirelessly connect canon MG3120 to macbook pro OSX?
If the printer is Wi-Fi capable, you have to get it on your home Network.
It needs to know the network_name and Wi-Fi password, and these need to be entered directly into the control panel on the Printer.
Once it has joined your network, it will show up under Add-a-Printer. -
How to I connect AirPlay for the first time?
I have the same problem... I just installed Apple TV, but it won´t connect to any of my devices, that are a Macbook Pro ( with the newest OSX Lion ) and my IPhone 3GS.
-
MacBook Pro and HP Premium 3-in-1 printer How to keep connected?
I have a HP Photosmart Premium 3-in-1 wireless printer C310. It is up and running and is connected to my MacBook Pro. However, sometimes I can get the printer to actually print while other times all it says is cannot find printer. It is really annoying - like it has a mind of it's own. I have tried shutting down the Mac, the printer, and restarting everything to find that it still won't cooperate. Can anyone help with this?
How are you connecting the printer to the MacBook?
What version of OSX are you using?
I am a printer tech for HP. -
How do I connect a Tascam US-144 Audio/MIDI Interface
I have no idea what I'm doing.
I also have a Axiom 25 which works just fine when I plug it in.
...so
what's the deal?not to be rude, but this is really starting to get on my nerves!
Dude, it's not my fault, OK? So you'd better calm down.
This Tascam device obviously has a direct monitoring option, which means that if you connect a sound source to one of its inputs and plug your headphones into headphone jack, you MUST hear something (and it is absolutely independent of any software that you use). If you don't hear anything, then there is a possibility that: a) you forgot to switch it on (hence no lights, no nothing, as you say) or put up the levels; b) the device is broken.
It is not true that its manual refers to Windows only. There are actually sections about how to configure it in Mac OSX (see, I had the trouble to download the manual just to help you). As for Logic, everything you need to know is also in its manual ('setting up your system' section if I am not mistaken).
Just in case, have you reached the stage when you can select Tascam interface as Input device for Logic in Preferences -> Audio -> General tab? If you have, it means OS recognizes it and the driver works.
So next step would be:
1) Create an Audio track
2) Select the APPROPRIATE input (the one where you actually plugged in your instrument) as a sound source (have you done that?)
3) Arm the track for recording or switch on input monitoring
I don't really know how much more specific can one be here. Also, note that I assume your Mac is in good condition and everything works, including USB ports and audio/USB cables. -
How do I restart samba on OSX 10.6.7?
How do you restart Samba on OSX 10.6.7? I've looked everywhere can't find any docs.
Reason for asking is that on occasion Samba just hangs and I have to forcibly restart the mac to fix it. (restart command just hangs the mac). It seems to have something to do with open connections to Win7 clients and sleep mode.There are two ways:
1. Go to your Sharing system preferences and uncheck the file sharing service (optionally go to the "Options" in sharing and disable SMB specifically). Then reverse these settings to turn it back on.
2. Use the launchctl utility in the Terminal to stop and restart the samba daemon. Open the Terminal and enter the following command to stop the daemon:
sudo launchctl stop org.samba.smbd
After this is done, redo the command with "start" to restart the daemon:
sudo launchctl start org.samba.smbd -
How to install newest version of OSX on a new hard disk in macbook air
how to install newest version of OSX on a new hard disk in macbook air
Hold down command-R to boot into recovery mode and then install the OS. You need an Internet connection.
-
How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA inputWelcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC..
Maybe you are looking for
-
Is there a way to transfer subtitles (text) from one iMovie file to another?
Hi, I spent literally hours of my life using iMovie 09 to add subtitles to a video before realising that I'd added them to the wrong one! You see, when I imported the video that I actually wanted to add subtitles to, instead of showing up at the top
-
Video Meetup: Risk Mitigation in a Post Windows Server 2003 World
The End (of Support) is coming! If you aren't going to migrate in time, or are even planning not to move some of your servers over, we've got some tips and best practices for minimizing your exposure to the threats at hand. We've got an expert from C
-
Can I close Firefox and Plugin-container with a batch file? ANSWER: Yes. SOLUTION below.
Steps to create batch file to End process tree: "Firefox.EXE" 1. create new .txt file 2. copy/paste the following: taskkill /IM firefox.exe 3. Save 4. Rename the txt file - EndFirefoxTree.bat 5. Run from desktop at any time, give it a cute icon if yo
-
I have uninstalled and reinstalled itunes to no avail... I have authorized my laptop... I have downloaded the 64bit itunes for windows. The sound on my laptop is functioning for other applications such as youtube, crackle... Has anyone else experienc
-
i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game