How do i connect my 24 ports switch with e3000

hello everybody, i know its a newbies question....but there's always a begining...
I just bought a e3000 and I have a 24 ports switch. I would like to plug more than 8 pc...how do I proced ? I used to have a dlink router and just plug a cat5e from the dlint to the switch ... but it doesn't work with the e3000
thanx in advance....
Nay

It's an unmanaged switch. All you should have to do it plug it into a lan port of the router. Doesn't matter which port on the switch, there is no configuration of the switch.
What do you mean by not working? Are the link lights on? You aren't getting DHCP on clients on the switch or what's happening? 

Similar Messages

  • How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

    How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
    This does not have an HDMI port but does have:-
    1) S-Video I/P,
    2) Video I/P,
    3) Audio Input (Left & Right)
    4) Audio In jack (for VGA and DVI source)
    5) DVI input
    6) VGA input

    Welcome to the Apple community.
    The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
    You may well wish to make sure that the DVI connection works before spending any money on a DAC..

  • How do I connect to a terminal server with my mac book pro

    How do I connect to a terminal server with my mac book pro

    Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field.  If that does not work then use the IP address to connect.

  • How can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

    how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

    https://www.youtube.com/watch?v=72l_FLsXNAg
    I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
    also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

  • How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7?

    How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7?  I have the latest Apple TV, ipads, iPhones as well as a solid HP Windows machine all on my home network.  Is there a way that I can connect my hard drive to my receiver or Apple TV directly so that the digital media is available on my network 24/7 rather than have it connected to my computer and available through Home Share which never works anyway??

    Sorry it's all done through iTunes.
    The following article(s) may help you with home sharing.
    Troubleshooting Home Sharing
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • How can I connect Bluetooth in iPad retina with non apple devices ?

    How can I connect Bluetooth in iPad retina with non apple devices ?

    What devices?
    The iPad can only pair with earphones, speakers and keyboards.
    It cannot directly pair with other phones or computers for file transfer or other operations.
    Most Bluetooth devices will have a user guide to connect them to other devices. follow that to start the process.
    From the iPad side, its just a matter of going inot Settings->BlueTooth turning it on, and searching for the device to pair. 

  • I have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?

    i have a MacBookPro5,5 how do i connect it to my hdtv WITH BOTH AUDIO AND VIDEO? and where can i buy this cable(s)?

    thank you roger. i have attempted to connect my mbp now 3 times (all different ways with different cables purchased) but unfortunately no success. i understand that with me having an older mbp it can be a challenge. i have found this page http://www.wikihow.com/Connect-a-Macbook-to-a-TV but with my unsuccessful history, i have become skeptical. i will try your suggestion and let you know. thank you again.

  • How do we connect Disney anywhere movie app with iTunes account

    How do we connect Disney anywhere movie app with iTunes account

    holy freaking cow for those of you who do this and all it does is take you to the i tunes download page make sure you are using THE LATEST VERSION OF GOOGLE CHROME  i seriously spent two freeking hours trying to figure this out and that was all i had to do !!!! to do this go to google type in google chrome download and just re download it and then go back to DMA and retry connecting your accounts and it should work from there !!!!!!

  • Trying to connect an 8-port switch to one of the 3 ports on Time Capsule

    but even the "connectivity" light is unlit.
    cable modem into house gets patched to where i want TC for best signal.
    using other ports to connect directly to MacBooks or PC give full gig speed
    trying to patch one of the ports back to basement and into linksys 8 port gigabit switch that disperses to:
    Two Wired Tivo Series 2 boxes (cause the wireless using WEP was too annoying)
    additional PCs in various rooms.
    anyone know how to address? all devices that need cabling through house are useless for now

    This should work no problem - I've got a Pluscom gigabit switch connected to my TC. Previously had a USR 10/100 switch.
    What happens if you connect the switch directly to the modem (with all the other devices disconnected, except for one computer)?
    Has the switch worked previously, or is it new?
    Has the cabling worked previously?
    Since the TC's ethernet ports work with other devices, the fault must lie with the cabling or the switch. Try connecting the switch to the TC using a known working cable.

  • How do I connect my new MacBook Pro with my wireless printer?

    New to Apple products, and can't figure out how to wirelessly connect to my printer.  I am assuming that it has that capacity....but can't find a way.  I have an HP officejet 4500 wireless printer.
    Appreciate the help.

    As you will come to discover and appreciate in this new world, most common and mundane tasks have been designed to be simple, easy and, often, self-evident. But we've had to put up with Windoze's Weird Ways for way too long and have had our instinct to do things naturally blunted. Fortunately, the brain damage is curable...
    Cheers!
    P.S., in time you'll come to appreciate and benefit from the Mac's minimalist design, as was the Will of Steve throughout Apple's products.

  • How do I connect via bluetooth my ipad with my Blackberry Torch

    How do I connect my ipad to my blackberry torch via bluetooth.

    am kinda regretting why I bought an iPad if it cannot interact with other devices, like the blackberry phone I have. I want to share pictures between the two devices but I cannot! Why is this so??????
    iOS does not support file transfer via Bluetooth. If you want to transfer photos, you'll need to sync through your computer or use a cloud-based service.
    Please help me otherwise this will be the last iPad I'll ever own.
    If you think some other device will suit you better, by all means sell your iPad and buy that other device.
    BTW, posting in a thread that's over two and half years old is not usually the best way to get help from us, who are all just your fellow users, just FYI.
    Regards.

  • How do i connect a page in Flash with pages made in Dreamweaver?

    Hi,
    So I'm trying to create this website in which the first page is made in Flash and the rest are made in Dreamweaver. Any idea how to actually connect them so that works? I know how to put something made from Flash into a Dreamweaver page; should i just do the same thing? Please help me! and please explain it to me in really simple terms, because otherwise I won't have any idea what you're saying. Thanks!!

    You would need to add code into your Flash file that directs the browser to the html page of your website.
    Assuming you want to do this using Actionscript 3.0, I have a blog post on this:
    If you want to have a button click navigate to a new web page:
    http://thepixelsmith.blogspot.com/2009/06/making-weblink-with-actionscript-30-in.html
    If you want a flash movie to navigate to a web pag automatically on the last frame:
    http://thepixelsmith.blogspot.com/2009/06/automatically-jump-to-webpage-using.html

  • How can i connect a windwos vista laptop with time capsule. Both are still in the same network

    Hi,
    i have a running wlan network. In this network are a macbook pro, a Vista notebook and the time capsule. The Macbook runs perfectly with the time capsule, but how can I connect the vista machine with the time capsule?
    Thanks for help

    The TC is SMB (windows networking protocol) compatible.
    Is the issue wireless? Can you get internet via the TC?
    Are you trying to access the hard disk?
    Did you load the airport utility for windows..? If not please do so.. that at least is the first step. It loads bonjour for windows, and a connection agent.
    Sometimes that is all that is required.
    Open a windows explorer and type in the address bar
    \\TCname or \\TCIPaddress .. obviously replacing the generic name with actual name or IP.
    You might need to change all the names to SMB standard via the utility. Short no spaces pure alphanumeric.
    You might need to fix the permissions.. ie turn on the guest account if security isn't an issue.
    You might need to fix networking in the vista .. shudder.. notebook.. to ensure it is not blocking the TC.

  • How can I connect to sun fire v125 with serial mgr port by hyperterminal

    Hi there!
    My c.o. got a sun fire v125 server.My mission is finish setting up the server.But as I followed the sun
    fire v125's document, it aint be connected to this server with serial mgr port by using windows xp hyperterminal .
    My step as:
    step1. Find the original RJ45 net cable from the v125 box, and put one side into
    Serial MGR Port of V125.
    step2. Combined the RJ45 net cable's other side with DB-9 converter,
    then plug the DB-9 converter into the PC's serial port(9 pins).
    step3. start the pc(windows xp sp2), and then creat a hyperterminal link in COM1 as:
    Bits/Sec--9600, DataBits--8, Parity--None, Stop bits--1, Flow control--Xon/Xoff
    And then pause connect. make it hang up.
    step4. push the sun fire v125 power button. after 1mins, resume the hyperterminal,
    connect to the v125.
    as above all is all my step here. Somewhere incorrect?if theres no problem, why can't I receive the
    "sc> " promote?
    Theres only one thing what i can do is input from keyboard....?
    I had known that there will be promoted the "sc> " after you start the connection of hyperterminal with the correct steps?
    BTW,I had input "#." with enter key, but it doesnt work!
    Is there anybody met this problem as mine? Or can you give me some hits?
    Thank you for your reading.
    Sinceley Regards
    Maqintoshi. 2008.2.7 pm4:10
    Edited by: maqintoshi on Feb 6, 2008 11:51 PM

    Im sorry for replying so late.
    I'd solved it long time ago.
    finally I found I made a mistake that I connect the Serialport Cable which came from PC
    to the RJ45(NIC) port which came from Sun Server :-@
    If you still can not get the prompts, check these parameters of your hyperterminal:
    connect a terminal or a terminal emulator (PC or workstation) to the SC serial management port.
    Configure the terminal or terminal emulator with these settings:
    * 9600 baud
    * 8 bits
    * No parity
    * 1 Stop bit
    * No handshaking

Maybe you are looking for