How do I connect my 27" iMac to the HDMI port of my LCD TV ?
How do I connect my 27"iMac to the HDMI Port of my LCD TV ?
I have the 22" imac
beside it I have an 24" dell monitor
I used a miniDisplayport->DVi converter in the TB port of the imac
thats the best performance because DVI like Displayport are both digital interfaces
same deal with hdmi really
so you need a miniDisplayport to dvi or hdmi depending on the inputs on your tv
and a cable and thats it
Similar Messages
-
I Just purchased a 21.5 iMac and connected it to the Internet using a apple air port router. How do I connect my windows PC to my air port router so I can transfer files.
It makes life easier to install the airport utility for windows.. which has a couple of different apps in it.. if you airport is new type then the utility is too old.. but is still valuable for Bonjour which provides network information for shared devices in the apple world to windows.. and a disk access agent..
It will also help the Apple computer access shared directory in the windows computer.. nowadays this is pretty easy. -
What is required to connect an iMac to the HDMI port on a TV?
I am trying to discover what I would need by which to connect my iMac 20" to a 42" HDTV with HDMI port. So far I have not found anything in the manual that tell what is needed, that all just state it can be done.
SparkgapperAccording to the "about this mac" it shows a Model Identifier: iMac7,1, processor Speed: 2.4GHZ and it is a dual processor.
-
im having trouble seeing my hard drive. please help
Have you verified that.....
The drive is formatted in Mac OS Extended (Journaled)? Most drives are pre-formatted for Windows NTFS, whcih will not work with the AirPort Extreme
The USB port on the AirPort Extreme is under powered, so if your drive is formatted for Mac as above, you almost always need to use a powered USB hub....even if the hard drive has its own power supply -
How do I add a printer connected to another iMac on the network to my printer list?
How do I add an Epson printer connected to an iMac on the network to the printer list on my MacBook Pro? I cannot get it to show up in the list for printers to add.
That only works if the printer is itself a network printer. You can't do it if it is directly connected to another computer on the network unless it is configured to be a Shared Printer on the other computer.
-
I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.
Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M. -
How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA inputWelcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC.. -
Hp pavilion ms235 how do I connect to a tv with a HDMI input?
how do I connect to a TV with a HDMI input? Can I use a USB graphics adapter?
Here are the specs for your HP Pavilion All-In-One MS235 Desktop Computer. Based on the specs, your computer doesn't appear to have a video output of any kind. A USB-to-video adapter such as the EVGA UV Plus+ UV39 will be required to connect your HDTV to your computer.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?
LOL!!
I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
Do a search on ebay.. 3g router.
But you can get the TC to join a wireless network.
It is a non-standard setup that Apple will not support.. the option is hidden.
If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
But please note the end result of this setup..
very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this. -
How to connect apple tv when the hdmi port on my tv is connected to the hdmi modem
I just got at&t uverse tv service. The modem is connected to the hdmi port on my tv. I bought a 4 in 1 out hdmi connector box, but don't know if this will work. I've tried plugging the apple tv into one of the in ports, but I can't get it to work. I've tried plugging both the modem and the tv into the out box and other components into the in ports, but it hasn't worked.
Has anyone ever run into this problem where the tv hdmi port is used and apple tv requires an hdmi port?
thanks,
JoanI use this device as my 4 splitter and i get connection all devices working then after a few hours i get an error. can i get some direction on how to place each device on this one splitter? the Uverse box and TV only has one HDMI plugs, I put the TV HDMI from TV input to splitter Output, then I put Uverse cable in port 1 on the splitter, then appletv in port3.
I need some direction if you can provide any.
https://www.google.com/shopping/product/152784781184241298?espv=2&biw=1280&bih=9 39&output=search&q=rockefish+4+way+hdmi&oq=rockefish+4+way+hdmi&prds=paur:ClkAsK raX8Rp5ts3l9LicxkyVgxiMktOihntNJfwmB3JSZqvmy2QH7nuNb5nXfuEcJKpDd3zJb7pX-FiaKI91u my6-sMyrgCwzZXXyNMD1i-sv0FLb7uvtaHuRIZAFPVH71NyIbBbK6WBgme3K-dFAXePqzVZQ&ei=En34 VL2PG9fsoATe5IGICA&ved=0CPEDEKYrMAA -
I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
BillThe Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch. -
This month I just purchased a 27 Display with Thunderbolt. I have a 17 inch MacBookPro with the mini DisplayPort. How do I connect my MacBook Pro to the 27 inch Thunderbolt Video display.
Mini-Display Port == ThunderBolt.
In other words, just plug it in. -
How can I connect my Ipad Air to my PC to see the Ipad screen on the PC?
I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. But now I don't know how to show the Ipad screen on the PC, as if it was a monitor / screen, so that I can then use Lync and share my PC screen with people virtually.
Thanks for any help! RegardsHi Rob - thanks so much for your help! Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
Do you use them on the Ipad or on the PC?
Do I need a cable too and which one?
Sorry... I am not very technical as you can see, thanks for your help.
Regards -
How can I connect personal hotspot to use the internet from my phone on my laptop?
I do not have internet at home and want to be able to connect using the personal hotspot on my phone. How do i do this??
How much would be a month?
From: Verizon Wireless Customer Support <[email protected]>
To: kelly johnson <[email protected]>
Sent: Wednesday, October 8, 2014 12:02 PM
Subject: - How can I connect personal hotspot to use the internet from my phone on my laptop?
#yiv3595356488 img
|
|
|
A message from the Verizon Wireless Community
|
| |
How can I connect personal hotspot to use the internet from my phone on my laptop?
created by Verizon Wireless Customer Support in iPhone 4S - View the full discussion Hello kmj65
Thanks for replying. The plan you have it would be an additional charge to add the hotspot feature. It's not free with the Nationwide plan. You would need to add the feature online at www.verizonwireless.com/myverizon
JoeL_VZW
Follow us on Twitter @VZWSupport Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community Start a new discussion in iPhone 4S by email or at Verizon Wireless Community
|
|
© 2014 Verizon Wireless
Verizon Wireless
One Verizon Way
Mail Code: 180WVB
Basking Ridge, NJ 07920
Not interested in these emails anymore, or want to change how often they come? Update your email preferences by visiting https://community.verizonwireless.com/user-preferences!input.jspa.
|
We respect your privacy. Please review our privacy policy for more information
about click activity with Verizon Wireless and links included in this email.
|
|
| -
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .
Contentmom6 wrote:
Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store. Now try System Preferences > Displays > Detect Displays. You should now be able to select a display mode for the monitor. If it still doesn't work, then I'd check that everything is properly connected. I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
Bob
Maybe you are looking for
-
Syntax Error with EXPORT statement in ECC 6
Hi All, I have one issue with EXPORT statement syntax. I have declared data like below: DATA: BEGIN OF mem_id, mandt LIKE sy-mandt, uname LIKE sy-uname, modno LIKE sy-modno, END OF mem_id. export the memory id
-
Hi All, i_dfkkko-xblnr IF NOT i_dfkkko[] IS INITIAL . SELECT opbel belnr FROM erchc INTO TABLE i_erchc1 FOR ALL ENTRIES IN i_dfkkko WHERE opbel EQ i_dfkkko-xblnr. ENDIF. I am using
-
How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.
-
Specifying page parameters in an MS Word Doc using JSP
Hi all, I have a JSP page which generates data and allows the user to open a Word Document with the generated data in it. I'm trying to figure out if there is a way to change the Page Setup parameters for the document. For example, I'd like a documen
-
How to get notification of target/untarget of application in managed server
through JMX. I need to be informed about target/untarget of application.