How do I connect my Canon wireless to iPhoto

I bought a Canon Elph 300HS wireless camera.  I want to have the pictures I take go into iPhoto. 
How do I do this?

iPhoto has no such ability. You'll need to establish contact between the camera and the Mac before iPhoto can see it. I'd ask Canon.

Similar Messages

  • How do I connect my canon mp490printer

    How do I connect my canon mp490printer

    The ipad prints wirelessly via the AirPrint technology. All the Canon printers that support AirPrint are listed here:
    http://support.apple.com/kb/ht4356
    Unfortunately your printer is not on the list.

  • How can I connect my Canon ZR200 camcorder

    how can i connect my canon ZR200 camcorder to my new imac

    If it's a new iMac with a Thunderbolt port, you should get the following:
    Apple Thunderbolt-Firewire adapter
    9-pin to 4-pin FIrewire cable like this one

  • How do you connect IPad to wireless printer?

    I have a Kodak all in one office hero 6.1  wireless printer. How do I connect my Apple IPad to it so that I can print from IPad?

    http://support.apple.com/kb/HT4356

  • How do I connect other devices wirelessly?

    My imac can connect to the internet wirelessly (no problems) but now I'm trying to connect a Pandigital tablet and an RCA wi-fi streaming media player to my internet network. My network isn't showing up on the available networks. What am i doing wrong? I've never tried to add other devices to my wireless network and am not sure if i need to change anything in my Airport Express to do so. Any help is appreciate! Thanks!

    HI , Welcome back to the HP Support Forums! I see that you're wondering how to setup the USB connection and Wireless at the same time on your HP Officejet 8600 Printer. I would like to help.  Your printer is capable of being connected USB on one computer and Wireless to other devices. To setup the USB Connection: IMPORTANT: Unplug the USB cable from your computer, if already connected. Make sure your HP printer software is installed on your computer.If your HP printer software is installed, use Start -> Programs -> HP -> -> Printer Setup & Software -> Connect a new printer ->Select USB-  Connect the printer to this computer using the USB cable. If your HP printer software is not installed on your PC, insert the printer software CD into your computer. If you don't have the CD, you can download software from HP Consumer Support.Select USB-  Connect the printer to this computer using the USB cable from Printer Setup & Software or from the Welcome Back screen from the CD.Carefully follow the instructions on the software screens. If you see a software screen prompt instructing you to connect the USB cable and the cable is already connected, check the checkbox which says “the USB cable is already connected” and then continue.Note: The printer can be connected by a USB cable to a computer and also be connected to a wireless network. Both USB and wireless connections can be active and used at the same time. At the end of the install process, you will see 'Set as default printer', make sure this is checked so that the USB connection is the default printer. If you wish to remove the wireless printer from your computer, go to Devices and Printers from Start Menu- right click on the wireless printer and choose delete/remove/uninstall.Hope this answers your question. Thank you for posting!

  • HT1595 how can i connect using enterprise wireless

    How can I using my dorm wireless internet to connect apple tv?

    Welcome to the Apple Support Communities
    To mirror the iPad onto your Apple TV, you have to use AirPlay Mirroring > http://support.apple.com/kb/ht5209

  • How can i connect a PDA wirelessly to a server

    hi
    i want to write a program that a PDA be able to connect to a server wirelessly, download the information such as user loging page from server and then update the server. does anybody knows how can i do that.
    many thanks

    This would be a basic HTML thing. Just put up a webpage and a CGI script on a server and use the built-in web browser on the PDA to
    Otherwise an applet would work.
    Sun also has the Java Mobile SDK for mobile devices such as cell phones and PDAs.
    Check it out, there is a lot of things you could do with this.

  • Can't connect my Canon Wireless Printer to my iMac

    I am new to imac and I am having trouble trying to setup my wireless Canon Pixma MG8150. Its not being recgonised by my imc even though I have the wifi connected to the printer. Can anyone help? Do I need the Airport Express Base Station for this?

    I have Canon Pixma MP560 wireless printer and scanner. Have you installed the Canon software and drivers on your iMac? You can go to Canon website and find the software based on your printer model. Maybe this is what you need: http://www.canon.co.uk/Support/Consumer_Products/Products_OLD/MG8140MG8150.aspx? type=download&page=1
    You can filter by software and by your operating system. I typically install all of them except the My Image Garden because as far as I know it's for organizing photos.
    After installing, the Wireless Setup Assistant can be used to help you connect to your printer. Or you can also add/remove printers and scanners in your System Preferences.
    The printer and your iMac need to be connected to the same router so they are on the same LAN.

  • How do I connect Epson TX550W wirelessly to Airport network?

    I have an Airport Express network connecting an MBP (10.6.3) and an iMac G5 (10.5.11) to a satellite modem. I want to introduce an Epson TX550W fully wirelessly, so that scanning is enabled and one computer doesn't need to rely on the other being up.
    The printer/scanner worked when the MBP was connected by Airport (used as a single node) which plugged into a switch along with the printer and iMac. I can't fathom the directions to make the printer wireless only.

    I found when I chased through the problem help something which wasn't in the set-up i.e. go to the printer and login to the airport network via the setup menu. Once I worked out how to enter a password connection was fine.
    Print/scan to my MBP under 10.6.4 is good. On the iMac G5 with 10.5.8 the printer is recognised as being part of the network, but I can't actually use it. I need to spend time looking at that when I can. Maybe your network hint will work there.

  • How do I connect a Canon Selphy CP900 using the USB port on Time Capsule

    I am running a MacBook Pro with Mountain Lion (10.8.5) and have installed the CP 900 driver (6.2) supplied by Canon from their website.  I have a Time Capsule set up as a stand alone internal network at my home and use it as a network attched hard drive directly - not via Time Machine.  I can "see" the printer when I connect but cannot print to it.    I open a photo in preview and select the printer and print.
    I get a
    Cannin Selphy CP Generic
    connection method not supported message - 9786
    The printer does show up in my Print and Scan control panel in System Preferences
    I also cannot reach it to check suplies
    At the print it dsiplays the printer to computer connection via USB
    Any help would be appreciated.
    Thanks, Asa

    Hi Asa,
    I experienced the same error -9786 although I'm not using the time capsule, but only through the wifi.
    I did following and resolved the problem.
    1. I re-installed the driver software.
    2. I re-configured the printer settings. (System Preferences - Printers and Scanners - "+" button)
    3. I didn't add the selphy manually, but just I just input "CP" in the searchbox in "Add" dialog, and clicked "OK" button then the printer is set automatically.
    4. I tried pringing a photo from iPhoto and could print correctly.
    it looks like the key action is #2 and #3 above, so why don't you give a try?

  • How do I connect to my wireless HP officejet 4620 printer? I was connected when I set it up, have not used it for 10 days. Cannot figure out how to connect.

    I purchased a new hp Officejet 4620 wireless printer about 10 days ago.  I followed the directions with installing it and it worked great.  I did not use it until yesterday.  I was not able to print from the wireless printer.  How do I correct this issue?

    I called Office Depot where I bought the printer.  I reinstalled the product software and it is printing.  Thank you for your response.

  • How do I connect my canon ip3400

    I had to unplug my computer, printer, modem and router.
    I put it back together but now I can't print. I see the printer in the 'print dialog'
    showing the printed job, trying to connect, saying printer is not connected.
    What did I forgot to connect?
    I use airport exterm
    mac 10.4.11
    Thank you

    Hi p,
    What connections does the Canon have? If it has a FireWire output, connect that, open iMovie and import.

  • How can I connected my Samsung wireless printer to print IPad document ?

    How to print mail... To wireless Samsung printer from iPad.

    I don't think the Samsung support AirPrint.
    http://support.apple.com/kb/ht4356

  • How do I connect my iPad wirelessly to my Mac lion osx server to be able to access photos, movies and songs

    I would like to connect my iPad with my Mac server so that I can access songs, movies and photos on the server. How can I do this?

    I think you might be a little confused between iTunes on the iPad and iTunes on the Mac.
    You cannot update iTunes on the iPad separately from the entire operating system on your iPad.
    Its iTunes on your Mac that is not up to date.
    I order to sync an iPad running iOS 6 or later (you indicate yours is on iOS 6.1.3) you must have iTunes 10.7 or later ON YOUR COMPUTER.
    iTunes 10.7 requires a Mac OSX version 10.6.8 or later.
    You indicate that your Mac is running OSX 10.5.8 (Leopard). That's not good enough. You need a Mac with OSX higher than 10.5.8. Depending on which Mac you have you might be able to update the OSX on the Mac to what's needed for iTunes 10.7.
    If you reply here with the type of Mac you have, the type of processor it has and the amount of RAM it has, we might be able to tell you if you can update it and how to do it. Not all macs can be updated to the required OSX version.

  • How can I connect a Linksys Wireless Router to another Wireless Router?

    As subject -- how can I do this:
    WirelessRouterA <-> WirelessRouterB <-> CableModem <-> Internet
    RouterA and RouterB are in two different locations, hard to wire.

    You should get a wireless bridge for the router that is in the location away from the modem.

Maybe you are looking for

  • BW BPS in NW 2004s

    Hi Experts We are using the BW BPS not BI IP functionality available in NW2004s version of BW system. I just want to know to what extent I can leverage(use) the addition functionality available for FOX, locking functionality and variable mapping I ca

  • Qosmio: X505-Q890 Black Screen BUT Computer has not crashed

    I have a Qosmio: X505-Q890, my screen goes black after a few minutes.  But if you look at it on an angle you can see screen and mouse moving around.  I am assuming that the backlights are going out on screen.  What is the fix.  I am capabale of dissa

  • Installing and setting up Real Application Cluster

    We installed Oracle 9i R2 and then inserted the CD of RAC. The CD did not open any front-end for installing and configuring RAC. Please let me know how to start the setup and configure RAC on Windows XP.

  • Stolen Phone Issues

    I am a new customer with Verizon and have encountered a sticky situation. Started my service August 11th and take ownership for going over with my data but on August 18th went to the emergency room and was admitted to the hospital August 19th. During

  • Printing issues in mac OSX

    Every know and then when I print in OSX the printer setup utility tells me that my printer has stopped and I have to open this app and restart my print jobs. Does anyone know why OSX constantly stops my jobs, when OS 9 worked fine for years? I am usi