How do I connect my dj2540 to my galaxy note 10.1?

Hi,
Are they on a same network ? Please use Google Store/Play search for "HP AiO Printer Remote" and install it on your Samsung.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks

sgetraer wrote:
I have a new time capsule (replace my old time capsule). I want to erase my old one. My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem). I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge. So,
1. why doesn't my cmputer see the old TC
2 once i have solved that, how do I erase the old one
3. Can I use the old one as a supplemental hard drive
     a. wired?
     b. wirelessly?
4. Can I use the old one as a range extender?
I know .. a lot of questions but I would appreciate any help.
Thanks
1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

How do I connect to face time gives message not connected to internet but Im connected what.s up???

How do I log in to face time when I get the message that I am not connected to the internet when un actuality I am connected to the internet.
Please help any one?

How do I log in to face time when I get the message that I am not connected to the internet when un actuality I am connected to the internet.
Please help any one?

How do I connect Keynote Remote via Blue Tooth NOT a WiFi network

Being a novice, at best, "What are the "steps" to connect Keynote Remote, via BlueTooth MacBook Pro and I-Pad

Thank you for the reply.
ctrl B makes the top bar (File. Edit. View. Controls. Store. Help.) appear and disappear.
ctrl S makes a side bar appear on the left side of iTunes. It shows the library which has Music. Movies. TV Shows. Apps. Playlists. Ect.
When I did the steps you suggested, my iPhone did not show up in that list.
I checked my firewall settings again, and they seem to be okay. My firewall is the only thing that I am not 100% sure of. If I go to Control Pannel>System and Security>Windows Firewall>Allow an app through Windows Firewall. It shows that iTunes is allowed. I'm not sure if something else might need to be allowed as well though. I have a few Remote options that are not allowed such as, Remote Event Log Management, Remote Scheduled Tasks Management, Remote Shutdown, Remote Volume Management, and Routing and Remote Access. I'm not sure if any of these need to be allowed or not, or if they are even affiliated with iTunes.

How to get S pen scrolling working on galaxy note 2

I just notice I can't scroll with the air view S pen like I can on other Android browsers like stock or Dolphin. Any suggestions would be great.

yeah that's what I need Airview hover. But I see we can't do it in firefox. This is my favorite browser but I hate it doesn't have the feature. Will it be available soon?

How do i connect my printer to a network on my computer so i can printer regular documents?

i have an eprint d100 printer. i cant print anything because the error message saids that im not connected to a network. i need to know how to get connected to a net work. NOTE i do not have a connection disk.

OK, you have two choices to connect your printer to your PC:
1. USB cable - this is the simplest, however, you will have to plug in the USB to be able to print.
2. "Ad hoc" wireless. This is a wireless link between your printer and your PC.
Let me know which one you want to use. In the mean time get the latest software for your printer from the "Support & Drivers" link at the top of this page.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA input

Welcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC..

How do I connect both a Mac and PC to Apple TV Home Sharing?

Goal
- I am trying to share both my PC and Mac through my Apple TV2 on the "Computers" home sharing menu.
- These are 2 seperate iTunes accounts as they are 2 different owners of the PC and Macbook.
- However, home sharing only allows me to have one at a time, can I not have 2 computers connected?
(The menu is in fact plural and says "Computers" not "Computer")
Attempt
-I turn on home sharing on my PC with my PC iTunes account, it then shows up on the "Computers" list as PC
-I turn on home sharing on my Mac with my Mac iTunes account, it then shows up on the "Computers" list as Mac, but it deletes the PC share
Troubleshoot
-So I started from scatch and connected the PC share with my PC itunes account, it shows up,
-Then I connect the Mac home sharing with the same iTunes login as my PC, but it also erases my PC from the "Computers" list and just displays the Mac.
Question
-How do I connect both a Mac and PC to Apple TV Home Sharing?
-I want them both to show up in the "Computers" list.
-So the final result will look like this on my Apple TV menu:
Computers
-PC
-Mac
whew... I'm out of breath... I hope there is an Apple Genius out there that can help.
Thanks!

After retrying the home share with the SAME ITUNES ACCOUNT ON HOME SHARING I finally got it to work.

How do I connect an existing Behance account to a new Adobe ID account ?

Hello,
I am an existing Behance account holder.
I recently started a new job, where they give me access to a personal Macbook & Adobe cc account.
I want to link my existing Behance profile to my new Adobe CC account.
Is this even possible - If so how to I connect them ?
It would not be beneficial to create a new Behance profile.
Thanks,

Hello - absolutely! You just need to make sure that your Behance account is linked with that Adobe ID. Please login to your Behance account, then visit this link and choose "use a different Adobe ID" and enter your new Adobe ID with the CC account. From then on, you'll use that email address to login to Behance:Behance

How can I connect to a different database schema,other than adobe?

I'm building an application where I want to use a different database for it,for storing additional data for the users(different from "edcprincipaluserentity" table in "adobe" database stores)..How I can connect to my database schema created in MySQL from Workbench,to assign tasks to my users,using the Process Management/Assign Task service?

You can only assign task to user that are known by the LiveCycle User Manager.
When you configure LiveCycle, you can tell it where you want to get the users from. They can be created them locally in the local database, or synchronized from an LDAP directory in which case it'll read the users from LDAP and make a copy of some of the properties to the internal LiveCycle database.
Bottom line, all users have an id (in the edcprincipalentity table) in the adobe database.
If you need your users to come from a different database, then you need to customize the SPI (security provider interface) so that you can synchronize the users coming from your external database. Again, this is a customization since out of the box, we don't synchronize against external database. But it is possible, the API is there and other customers have done it.
I hope this clarifies things a bit.
Jasmin

How can I connect my MacBook Air to my Brother printer?

I have a Brother wireless printer and I'm trying to figure out how I can connect it to my MacBook Air. It came with 2 CDs, but since my laptop doesn't have a CD-rom, I obviously can't set it up that way. And the set up booklets don't say anything about this...can anyone help?

Any printer software that comes on CDs will either be available from the printer manufacturer's web site or from Apple. In fact, it is often more current than whatever versions are on the CDs or DVDs.
Also, in most cases, printers with wifi capabilities have to initially be setup by using a USB connection.

My Ipod is disable and it tells me to connect to itunes to stop disabling it. What do I do? How do I connect to Itunes?

My Ipod is disable and it tells me to connect to itunes to stop disabling it. What do I do? How do I connect to Itunes?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Lightroom 5 is tied to my photos in a folder on my computer, if I move that folder to a hard drive, how to I connect Lightroom to the new location on the hard drive vs my computer?

Lightroom 5 is tied to my photos in a folder on my computer, if I move that folder to a hard drive, how to I connect Lightroom to the new location on the hard drive vs my computer?

How to recreate iTunes Library
No content shows up in iTunes after updating

How do I connect to a terminal server with my mac book pro

How do I connect to a terminal server with my mac book pro

Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field. If that does not work then use the IP address to connect.

HT204023 Just bought a new iphone 4 how do i connect to my ipad with hotspot

How do i connect with hotspot between my new iphone 4 and mt ipad2

iOS: Understanding Personal Hotspot
iOS: System requirements for Personal Hotspot

How do I connect my dj2540 to my galaxy note 10.1?

Similar Messages

Maybe you are looking for