How do I connect my (once) existing IPhoto Albums (now Photos) to Apple TV?

How do I now connect my (previously existing) IPHOTO albums (now Photos) to my Apple TV and where are my **** albums?

You do not... no computer is "connected" to an ATV.
Content on the computer can be shared via HomeSharing.
A newer Mac is required for AirPlay support.

Similar Messages

How do i transfer existing iphoto albums to a new computer

how do i transfer existing iphoto albums to a new computer?
thanks

Are you asking about transfering iPhoto Libraries from one Mac to another Mac? Or about transferring iPhoto albums from an IOS device to a computer? And what is your iPhoto version?
If you are talking about your Mac, simply transfer the iPhoto Library to the new computer. You can copy it using the network, by copying to a portable disk, or by connecting your old mac to the new mac in target disk mode. After copying the iPhoto Library to your Home folder on the new mac, double click it to open it in iPhoto and to point iPhoto to it.
If you are asking about transfering albums from an IOS device; the albums you create on your IOS device are not synced back to your computer. You share the photos by adding them to the Photo Stream, creating shared Photo streams, sending them by email, or publishing web journals.
Regards
Léonie

Now that the photo gallery in MobileMe is ending, is there another photo sharing site to which existing iPhoto albums can be transferred as is, with photos in the same order and with titles, and with minimal problems?

Now that the photo gallery in MobileMe is ending, is there another photo sharing site to which existing iPhoto albums can be transferred as is, with photos in the same order and with titles, and with minimal problems?

No. If you don't have the album you originally used to create the galleries you can do so by dragging the photos from each gallery to a new, empty album. Then when you find the photo sharing site/option you have decided on you can easily upload each album to the site.
Another option is to obtain a hosting service and create iWeb photo pages for each album and future albums similar to this photo page in one of my demo sites: iPhoto Book as an iWeb Slideshow. Or you can use the iWeb album page and have an album for each iPhoto album on it like on this demo page: Page-7 .
OT

How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret...

HT1619 how do I connect my iphone 3GS to my new laptop? Apple says there is a problem with the 'pairing'

How do I connect my Iphone 3GS to my new laptop? Downloaded Itunes only to be told there is a problem finding my 'pairing' don't know what this is, any ideas?

You might want to take a look at Printopia....although you may find that you need to have the printer connected directly to your computer for this work.
If you try it out, please post back with your results.
http://www.ecamm.com/mac/printopia/

Can't get new photos added to existing iPhoto albums to sync with iPhone

I tried talking about this in the iTunes area, but there was no response:
https://discussions.apple.com/message/20660036#20660036
I thought I'd drop by the iPhone discussion area next.
The problem in a nutshell is that I can't get new photos added to iPhoto albums to sync with my iPhone 5. I can even unselect the albums, sync, see the albums deleted on the iPhone, select the albums again, sync, see the albums recreated - but the recreated albums don't include the photos I added yesterday.
I don't know if this is an iTunes 11 bug, an iPhoto bug or an iPhone bug.
Any suggestions?
Thanks,
doug

Yes, but which album will be empty?
Anyway, as soon as I saw how creating albums locally on the iPhone actually worked I said to myself, "This is not reasonable" and as much as I dislike iPhoto decided to keep doing it there until that feature is improved.
It seems like an obvious thing to improve. Then the albums can sync between the iPhone, iPhoto and other iOS devices more like "it just works" (which it doesn't do now).
doug

TS3989 transferring photos from iPhoto album to photo stream

I am using Mac OS lion version 10.7.5 and iphoto version '11 9.4.3 (720.91). I have an existing album of photos that I would like to transfer to photostream so that I can share those photos with friends and family. I "select all" for the photos in the album and then click on share with photostream, but none of the photos are appearing in photostream. Any tips on how I can make this process happen and share these photos?

For Shared Photo Streams you need to be running 120.8.2 or later. With 10.7.5 all you can use is Photo Streams between your own Mac devices, i.e. Macs and mobile devices.
iCloud: System requirements
OT

Iphoto albums and photos are mission

I currently have iphoto 6.0.6. When I open iphoto it is empty. All my albums and folders along with photos are not there. I know the photos are still on my hard drive but I don't know how to get everything back in iphoto.

dken
Welcome to the Apple Discussions.
Some possibilities:
1. Has iPhoto 'forgotten' where your library is? Hold down the option (or alt) key and launch iPhoto. Select 'Choose Library' and navigate to the iPhoto Library Folder. See if that will open it.
2. IS the db corrupted? Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library Folder allowing it to overwrite the damaged file. If not, then you'll need to create and populate a new library.
To create and populate a new library:
Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, books, calendars etc.
Move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

Duplicate iphoto album. Photos resorted

Right click an iPhoto album, choose Duplicate
Photos in new album are resorted.
How can I force the duplicate to retain sorting order of original album?
Snow Leopard version of iPhoto did not resort photos in duplicate album.
Workaround is to delete all photos in the duplicate album, and Copy/Paste all the photos from the original.
This retains the sorting order. But what a lot of unnecessary steps!
-B

In Photos you need to show the side bar then right click to arrange your photos.

IPhoto album not appearing on Apple TV

I just created a new album on iPhoto.
The new album appears in iTunes - "Choose Photos to Share" and I checked this particular album; however, the new album is not displayed on the Apple TV.
All my older albums are displayed on Apple TV, but not the new one.
Thanks for your help.

Try quiting iPhoto or restarting iTunes, or turning the Apple TV off and on, or basically anything to close and re-open the homeshare connection.

How do i delete "All Imported" pictures under "Album" under Photo App in iPad 2?

hi, i now have many photos in the All Imported folder under Album in Photo App in my iPad 2. I don't seem to have a way either in Ipad 2 or in iTunes to DELETE / REMOVE these pictures?
can someone let me know how?

Yes, delete all the apps currently in iTunes, then transfer all the apps currently on the iPad back into iTunes. Of course it will take some time to sync the apps back into iTunes, but it satisfies your desire to remove all apps from iTunes that are not on your iPad without the need to laboriously note what is and is not there. In fact as a bonus after removing all the apps from iTunes you could open the ..\iTunes Media\Mobile Applications folder and delete any remaining orphaned files that might still be there, before you transfer purchases.
tt2

How can I connect remotely to my Time Capsule now Mobile Me is gone?

Hi,
I have a Time Capsule with a trio of external hard drives connected to it where I store all my files and backups.
In the past I used Mobile Me's Back to my Mac so that the USB volumes appeared in the shared area in Finder on all my Macs so that I could access my data from anywhere. Great... But...
Now that Mobile Me is gone, is there any way I can do the same with iCloud on a computer still running Leopard (and thus without an iCloud setup option in System Preferences)?
Thanks in advance for any help or suggestions!

Again, I thank you for your reply, 'LaPastenague'. I can't get over what a wonderful asset these communities are, especially for us eager to learn Apple newbies!
In terms of my network:
Provided by my local cable company, it includes a 1TB Time Capsule that acts as router and host to a USB hub which holds 3 external drives. The internal TC drive stores my data. One of the external drives holds the Time Machine backups from my various Macs, the other two hold media and backups for my kids' PCs, etc. Also on my network is a 5 port switch to accommodate my kids' game consoles and an old networkable DVD player. On the network are also two Airport Expresses. One of the Expresses extends the range of my wireless to the upstairs and the other hosts an inkjet printer. And, finally, on the network is a TCP-IP HP laser printer.
I have played a bit with apps like LogMeIn and Teamviewer and found they work well for things like baling my folks out of technical difficulties remotely, but preferred the Back to My Mac solution offered by Mobile Me to (relatively) safely and (totally) seamlessly mount my Time Capsule's drives as volumes in the Shared section of my Macs' Finder. No fuss, no muss! ...despite Mobile Me's less than stellar reputation, it worked perfectly for me.
I went back to work this week at my job in education and, at first, privately cursed our IT department for bumping up security over the summer break resulting in blocking my home volumes from appearing. Then I realized, of course, that since last I sat at my desk, the Mobile Me service had be closed down and that was the real culprit for the loss of my mounted home volumes.
And, as established earlier in this discussion, my old iMac was never going to play nice with Lion or better to move up to iCloud, so I was going to have to go back to the drawing board.
I appreciate your eBay suggestion. However, although not a domain client, as my old iMac does reside on the school board's network, I'm fairly certain the VPN route would not be an option. I don't imagine building a secure tunnel to my data storage at home would be a priority to our IT department! <G>
USB Flash drives are a pain to sync and keep track of, but I guess that is what I will have to do for work.
<sigh>
Once again, thanks for your help.

How do I Export Raw images from Iphoto to Adobe Photo Elements 4

I recently purchased Photo elements 4 because I could import images from Iphoto in Raw format and work with them. Everything I have read and the instructional video sent to me by Adobe make it look and sound very easy but so far I have had no success.
I have been able to open Bridge and view photos from Iphoto so it seems to me that everything that I have in Iphoto is automatically transfered to Elements 4. However I can not find my Raw images. What am I doing wrong or failing to do and is there some logical sequence that I have to follow to import Raw images.
I am using a Nikon D200 and just to be safe I have been shooting so the images are saved both in JPEG and RAW.
Thanks for any help you can provide

dakota8,
iPhoto and Adobe Bridge are incompatible, so you need to decide which one you want to use (for which photos). iPhoto is a database, with many flexible features for organizing your library and finding your photos. Bridge is a file browser with some organizing capabilities. You absolutely should not use Bridge or any other application (Finder included) to browse the files inside your iPhoto Library folder, as it will damage the iPhoto database. To verify, click on iPhoto's Help and read the section "About using the iPhoto Library."
If you want to keep your RAW files in iPhoto, then you'll need to open them from iPhoto. As Dave E said, this can be done by setting the iPhoto pref to export RAW files. You also need to set PE 4 as the external editor in iPhoto's preferences. With this setup, you can select photos using iPhoto, open the RAW files into PE 4, then edit. Now comes the wrinkle in the workflow. Normally, you would do a Save to cause your edited file to be saved back into the iPhoto library. This Save, not Save As, requires that the filename and extension stay the same. Works great with jpeg files. However, once you edit the RAW, the extension (and file format) must change. Save will not work, because any save at this point is treated like a Save As. So you have to Save As to a folder OUTside of your iPhoto Library, and then import it in as a new file. There will be no link between the edited version and its unedited RAW file. You could organize inside iPhoto to display the edited file beside its original RAW, or keep separate rolls for the originals and edits.
With that in mind, you might not want to save the RAW files in iPhoto at all. You could create your own filing system for them, which you would browse using Bridge. Upload using Image Capture to save your files to a folder of your choice. Once you edit the RAW files and save as another format, you could them import into iPhoto for cataloging or further editing. You'll just have to find the system that works best for you.
BTW, don't save your edited RAW files as Adobe RAW. I tried and discovered that iPhoto refuses to import them at all.
I have been able to open Bridge and view photos from Iphoto so it seems to me that everything that I have in Iphoto is automatically transfered to Elements 4.
There's no transferring involved at all. Bridge is rooting directly inside the iPhoto Library folder. Did I mention that it's best to avoid this?
However I can not find my Raw images.
When you import a file it is saved into the Originals folder. Your RAW files are there, along with any video clips you may have imported.
iPhoto automatically creates a jpeg version of your RAW files and stores it in the Modified folder. It has to do this in order to display the picture on your screen. With video clips, a jpeg of the first frame is created for display purposes.
I am using a Nikon D200 and just to be safe I have been shooting so the images are saved both in JPEG and RAW.
If you import both versions into iPhoto, then you have
Originals - RAW
Modified - jpeg
Originals - jpeg
(Modified - jpeg - if you edit the jpeg version or if they are auto-rotated to portrait orientation)
I don't shoot in RAW, so I can't really comment about which workflow would be the most efficient. I just played with it long enough to realize that there is no easy way to do it.
Regards.

How does Captivate 4 function once imported into and now within Flash 4 (AS3 environment)?

I have a specific need to try to get a handle on a certain section of the timeline to add a textbox with certain text in it. if (label.name == "Slide_3") {then... display the textbox and the text } does not work. I am trying to use the addChild method to display the textbox and its text in the displayList during the Slide_3 section of the timeline. This may not be the way to go as I can't seem to get it to work...
My Goal:
Using AS3, working from within Frame1 coding area (Timeline scripting area), have some text appear in a textbox but only while Slide_3 is playing.
I already have written the code that pulls text in from an XML document, stuffs it into a dynamically created textboxand, and am trying to take some of the text and have that text only appear during a certain part of the timeline.
Assumptions:
The standard/native way that a Captivate.cp file is imported into Flash CS4 results in a timeline that has labels (Slide_1, Slide_2, Slide_3, etc.)
I don't want to manually create a textbox and manually put the text into it on the Actions frame of the Slide_3 label, but instead would like to put the text into the text property of the textField programatically from Frame1 (Action frame in Frame1 + F9)
I have tried using the addChild method but that adds the textbox to the WHOLE timeline. (Creating a textbox is not a problem, but instead getting some text into the textbox only during Slide_3 is the issue)
The Problem:
How can I get the text to only appear during the playing of the Slide_3 label frames? (But NOT display during the rest of the timeline)
When I run code on the Action frame of Slide_3 that outputs the displayList, I get the following:
root1 [object MainTimeline]
     info_txt [object TextField]
// this is a textfield that i created
      instance3 [object TextField]
      Slide_3 [object Slide_3_7]
           instance15 [object Shape]
           instance16 [object MovieClip]
                instance17 [object Shape]
           instance18 [object clickbox4_9]
                click_zone [object SimpleButton]
                instance19 [object Shape]
           instance20 [object Shape]
           instance21 [object Shape]
           instance22 [object Shape]
      SlideClip3 [object MovieClip]
Yet, when I trace the keyword *this* (from within the Action frame in Slide_3) Flash outputs [Global Object].
I am wondering how I can display the specific text for Slide_3 only during the playback of Slide_3. I'm guessing that, if I could only find what the Global Object is, I could addChild to its display list property.
I also tried using some of the Static variables to no avail (that were automatically created when the import occurred) such as:
var ref=this;
var nCurSlideIndex:Number;
var currentSlide_mc:MovieClip;
var quizPlaybackController;
var scrubberChanged:Boolean;
var slideNewFrame:Number;
var mcLoader:Loader = new Loader();
var loading_sub_mc:MovieClip;
var m_preloaderLoaded:Boolean = false;
Any guidance, suggestions, ideas, that you have would be very welcomed!
Some Things that I've Tried:
Incidentally, when I write code in the main timeline (Frame1 and press F9) I get some of the following behavior:
//this.Slide_1.addChild(info_txt); //displays the textbox with text but only during "slide 1"
//this.addChild(info_txt); //displays textbox and text during the whole timeline
//SlideClip1.addChild(info_txt); //displays textbox and text only during "slide 1"
//SlideClip3.addChild(info_txt); //nothing displays --TypeError: Error #1009: Cannot access a property or method of a null object reference.
//ref.addChild(info_txt); //displays textbox and text all the time
//addChild(info_txt); //displays textbox and text all the time
//ref["Slide_3"].addChild //no luck here either

I don't have any insights into this particular problem. But we are having strange things happen with Captivate and imported AS3 animations. never had problems witht he AS2 animations. so, we are having to recreate and everything and republish as as2.

How can I make a book in iPhoto using some photos and a lot of text-- recipes--written in ms Word2011?

I'm trying to make and have printed, a small cookbook of favorite recipes using my photos as illustrations. Given the themes in iPhoto, writing in Word2011, it doesn't seem to work as a click and drag into designated spaces. Only photos work with too limited text. Any ideas?

Place it the book, right click on it and fit to frame
LN

How do I connect my (once) existing IPhoto Albums (now Photos) to Apple TV?

Similar Messages

Maybe you are looking for