How do I connect my second PC or Laptop to main PC with router?

I recently bought a new Desktop PC and had 2 laptops and now have an older Desktop PC!
I also bought a WRT150 Wireless-N router to connect to the enternet with both my PC and laptops , to play games , share pictures betwin my PC with friends and family.Previously I lived in place where no one know what does network word mean...so I'm new to enthernet and network and I have a question! Once I installed the software from instalation CD and succesfuly connected to the enternet trough the router how do I connect my other Desktop PC and Laptops to the router?Do I need to install that software to my other computers? How do I check if I need addition devices? Can any one write a step by step instruction for me or give me a link to the page if it was wroten already?

Ok so the new desktop which is wired has Vista. You have 2 laptops with what OS? Are they wired or wireless? The older PC has what OS and what network card (wired or wireless)?
As you know Vista is a new operating system and is not compatible with some routers yet so I would have another PC with Windows XP (with service pack 2) wired to your router. Now the information on the network card that is needed is what type it it? Wired or wireless which is easy to tell by if it needs to be plugged in or not. Most wireless network cards come with a driver and software so that is the software I am referring to.
When setting your wireless security up some older operating systems can not use WPA or WPA2 so they have to use WEP which is not that good bet better then nothing at all. The SSID has to be something other then linksys so you can identify your wireless network. So when you get all this information also post your router model/version and how you have it configured as far as the SSID and DHCP range, internet connection type (DSL or Cable) , and security. Don't worry you system will still be secure as long as you DO NOT leave your routers password as admin and do not tell anyone your routers password for any reason.
Message Edited by Ikester on 07-11-2007 10:49 PM
Richard Aichner (Ikester)

Similar Messages

How do I connect a second LaCie drive to my iMac 24"

Hi, Im new at this and would like to know how do I connect my second 1TB LaCie drive to my 24" iMac. Im not sure if I need to connect it directly to my current LaCie drive since my iMac does not have a second firewire 800 port. Also, should I disconnect the old one to format the new one before?

Oh..Ok, but to format the new one do I need to disconnect the old one and then connect the new one to the iMac before doing the daisy chain? Also, can Time Machine run both at the same time? Right now I have the Time Machine backing up my entire computer on the old LaCie, I want to use the new one to place my iPhoto library and all of my RAW images from my photography clients so I can free up space in my iMac.

How do i connect my iMac to my tv to see movies with wire

how do i connect my iMac to my tv to see movies with wire

Hey rodskc10,
Thanks for the question! Based on the iMac model and TV you have, you’ll need to pick up a compatible cable. There are a few options that can be found on the Apple Online Store:
Mac Cables - Computer Audio & Video Adapters, Network Cables & More - Apple Store (U.S.)
http://store.apple.com/us/mac/mac-accessories/cables#!
For example, if you have the latest iMac and an HDTV, a mini DisplayPort to HDMI cable should do the job (you’ll connect this to the Thunderbolt port, which is backwards compatible with mini DisplayPort).
For additional information, see this article:
OS X Mavericks: Use a television as a display
http://support.apple.com/kb/PH13801
Thanks,
Matt M.

How do you connect your macbook pro to a sony bravia tv with a belkin cord????? HELP!!!!!!!!!!!!!!!

How do you connect you macbook pro to a Sony Bravia tv with a Belkin cord!?!?!?!?!?!?!? We know how to set it up, but what setting do you put your tv on!?!?!? we have tried everything, but it wont work!!!!!!!!! HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Well, I have connected my mbpr directly to a Sony Bravia using an hdmi cable, then set the tv to use the corresponding input port, and it works just fine. Have also connected via airplay -> appletv -> tv (with the last connection via an hdmi cable), which also works fine.

HT3500 how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?

Firstly, the HP printer must be connected to the ASUS' network. Then, simply connect your MBP to the network and your printer should be addable in Print & Fax in System Preferences.

How do I add a second email address in my email account with Shaw cable

How do I add a second email address in my email account with Shaw cable. It is already set up with Shaw but how do I add it to my incoming email

If you are using Apple's Mail setup is: Mail>Preferences>Accounts tab, click the + sign to add an account. You'll need the email account name and password to input on the first screen. Mail should then attempt auto-setup but if it can't do it you'll need to manually add the mail server info, etc.

I have a new imac how do i connect my phone to this computer if its registered with another without deleting all my content

i have a new imac how do i connect my phone to this computer if its registered with another without deleting all my content. when i go on itunes it says that i can sync but will erase all the content and replace it with whats on the mac.

Read this and follow carefully:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

How to secure connection in sql server 2008? my main problem is which certificate should i add in mmc

i'm recently working on hardening of sql server 2008. now i face with a problem. my problem is how to secure connection in sql server 2008? my main problem is which certificate should i add in mmc? what are these certificates about?and guide
me in choosing the appropriate certificate.
and how should i know that the connection in sql server is secured?
plz guide me from the beginning cause i'm rookie in this subject.
thanks in advance.

Hi sqlfan,
Question 1: my problem is how to secure connection in sql server 2008?
Microsoft SQL Server can use Secure Sockets Layer (SSL) to encrypt data that is transmitted across a network between an instance of SQL Server and a client application. For more information about Encrypting Connections to SQL Server, please refer to the following
article:
http://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
Question 2: my main problem is which certificate should i add in mmc? what are these certificates about?and guide me in choosing the appropriate certificate.
To install a certificate in the Windows certificate store of the server computer, you will need to purchase/provision a certificate from a certificate authority first. So please go to a certificate authority to choose the appropriate certificate.
For SQL Server to load a SSL certificate, the certificate must meet the following conditions:
The certificate must be in either the local computer certificate store or the current user certificate store.
The current system time must be after the Valid from property of the certificate and before the Valid to property of the certificate.
The certificate must be meant for server authentication. This requires the Enhanced Key Usage property of the certificate to specify Server Authentication (1.3.6.1.5.5.7.3.1).
The certificate must be created by using the KeySpec option of AT_KEYEXCHANGE. Usually, the certificate's key usage property (KEY_USAGE) will also include key encipherment (CERT_KEY_ENCIPHERMENT_KEY_USAGE).
The Subject property of the certificate must indicate that the common name (CN) is the same as the host name or fully qualified domain name (FQDN) of the server computer. If SQL Server is running on a failover cluster, the common name must match the host
name or FQDN of the virtual server and the certificates must be provisioned on all nodes in the failover cluster.
Question 3: how should i know that the connection in sql server is secured?
If the certificate is configured to be used, and the value of the ForceEncryption option is set to Yes, all data transmitted across a network between SQL Server and the client application will be encrypted using the certificate. For more detail about this,
please refer to Configuring SSL for SQL Server in the following article:
http://technet.microsoft.com/en-us/library/ms189067(v=sql.105).aspx
If you have any question, please feel free to let me know.
Regards,
Donghui Li

How do I connect and detect a high frquency pulse (0-3500hz) with a variable pulse voltage (0v low,5-10v high), on a SC-2345 connected to a PCI-6224?

How do I connect and detect a high frquency pulse (0-3500hz) with a variable pulse voltage (0v low,5-10v high), on a SC-2345 connected to a PCI-6224? Labview doesn't generate a waveform if I try to graph the signal, and my analog input doesn'y recognize that the signal is even pulsing, only that it has a voltage. Some advice would be much appreciated.
Thanks in advance,
Garrett

Hi Garrett,
It sounds like you want to do Frequency Measurements of a signal that is somewhat digital.
There are two ways you can really do this:
Wire your signal to the counter input and use the Digital Frequency examples (Help > Find Examples > Browse > Hardware Input and Output > DAQmx > Counter Measurements > Digital Frequency)
Continue taking analog measurements and use some sort of logic to determine where you are getting rising and falling edges.
I would recommend doing method #1, but you must determine which one is the best for your system.
If you want to connect to the counter pins then you will find the
terminals located on the side of your SC-2345. If you don't need
to condition your signals then simply wire everything into the proper
pins for your counter (below).
Default NI-DAQmx Counter Terminals (Connector 0)
Terminal
Counter Context (Default)
Motion Encoder Context
Signal Name
37
CTR 0 SRC
CTR 0 A
PFI 8
3
CTR 0 GATE
CTR 0 Z
PFI 9
45
CTR 0 AUX
CTR 0 B
PFI 10
2
CTR 0 OUT
PFI 12
42
CTR 1 SRC
CTR 1 A
PFI 3
41
CTR 1 GATE
CTR 1 Z
PFI 4
46
CTR 1 AUX
CTR 1 B
PFI 11
40
CTR 1 OUT
PFI 13
Otis
Training and Certification
Product Support Engineer
National Instruments

I ripped a new CD to iTunes and backed up to the cloud. The songs are already on my iPhone 4S, but I can't get them on my iPad. I already connected the iPad to my laptop and selected "Sync with the iPad over Wi-Fi". On the iPad I forced a Sync. Help!

I ripped a new CD to iTunes and backed up to the cloud. The songs are already on my iPhone 4S, but I can't get them on my iPad. I already connected the iPad to my laptop and selected "Sync with the iPad over Wi-Fi". On the iPad I forced a Sync. Help!

Try deleting and redownloading by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How do you connect a second monitor to a MacBook Pro

i am wanting to connect a second monitor to my MAC so i can have 2 of my pages showing at the same time. how do i do that?

I am pretty sure the MacBook and MacBook Pro only supports ONE external monitor of any description, even though the cabling will support two.
The short story, that Courcoul has alluded to but not stated, is this:
All you need is an Adapter. All the software to do elegant multiple display work is already in place in your Mac, and will be activated automatically the moment you plug it in. Nothing to Install, no settings to change. Just plug in the display.
The default mode is Extended Desktop, where the one-monitor desktop is enhanced by having the area of the second display appended to its right side (or any other side you specify). The mouse moves freely from one display to the other, and can drag windows with it, which can be resized on the other display. You can even drop things so that half is on each display, and they will scroll and update "the right way".

How do I connect a second Cinema Display to a Radeon 9600 PRO card?

I have a G5 dual (PowerMac7,2) with a Radeon 9600 pro card running an HD cinema display (clear plastic) and want to connect a second smaller 20" Cinema Display with the same type of plug - I think I need a DVI to ADC adapter - is this the case?
Thanks in advance for any suggestions.

Yes, this is the case.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=7E5 0FEF9&nplm=M8661LL/B
Also, read this:
http://docs.info.apple.com/article.html?artnum=75286
Especially Note 3 at the bottom.

How do i connect my new apple air laptop to my TV using a yellow,white, red cord

How do I connect my new MacBook AIr to my TV using a Composite AV Cable. THe cable has a tiny connector at one end and has the red, white, yellow plug in for the TV on the other. I am wondering if I have the wrong connector?

http://store.apple.com/us/buy-mac/macbook-air?product=MD712LL/A&step=config
Scroll down to accessories.

How do I connect my iPad to my laptops internet connection

I'm using a usb modem on a MacBook Pro running 10.6.8. I want to connect my ipad to my laptop using my airport card and connect to the net. I made a computer to cpmputer network and can connect my ipad to the network but still get no internet connection. ZCan someone tell me how to do this? MY ipad is the latest ipad. Airport utility does not pick up anything.

And, please Get the iPad User Manual for iOS 5 and read it. Instructions for connecting to WiFi are found in the manual.

Internet connection is fine, but my laptop no longer recognizes the router (WRT54G)

I discovered this problem while trying to add a wired PC to my router. Even though I connected, disconnected, and reconnected my laptop multiple times, it was unable to recognize the router (WRT54G). This has not always been a problem, since I set up the initial wireless connection and later an Xbox Live connection, but that was over six months ago. There's no obvious physical damage to the router or my laptop, neither has been dropped recently or anything like that.
Any help is appreciated.

Well, 2 quick things. Try a cable from one of the working systems on the laptop. Also check your local area network connection (Start Menu, Connect to, -> Local area network, right click, properties, scroll down to "TCP/IP") and make sure it is set to "Obtain IP Address automatically, and "Obtain DNS Automatically". I have had nothing but trouble with the setup CD's.

How do I connect my second PC or Laptop to main PC with router?

Similar Messages

Maybe you are looking for