How do I connect my time capsule with a Lynksis wi fi netwotk?

How do I connect my time capsule with a Lynksis wi fi netwotk?

You cannot extend or repeat a non-apple router in an apple router..
You must plug it in via ethernet and then setup roaming network (or if you like a completely separate network.. makes no difference from the TC point of view). TC is in bridge mode. That is router bridge not wireless bridge.. I gave the info on the other thread you are running.. very confusing when you ask in multiple threads.

Similar Messages

  • How can I connect two Time Capsules with UTP

    Hello,
    I have one TC connected with UTP (WAN-port) on my modem to Internet on the second floor. I have a good WiFi-signal on the second floor.
    I bought on new TC to get a better WiFi-signal on the first floor and also used for backup.
    I like to connect TCold with TCnew with UTP to get a great network. I shoos UTP-connection in stead of WiFi, to get a faster performance from my network.
    So I will use both WiFi-signals from both TC's, but de TC must be communicate with UTP, not with WiFi.
    I think I connect UTP in my  LAN-port from TCold
    Which ports do I use on the TCnew (WAN-port or LAN-ports)?
    How do I configurate de software?
    Sometimes I see not 2 but 4,5 or 6 TC's in my network???
    When I disconnect UTP between the TC's the connection with WiFi is 450 Mbit/s.
    When I connect UTP between the TC's the connection is 217 Mbbit/s????????????
    Can somebody help me?

    The main thing is that TCnew is in bridge mode..
    Open the airport utility.. go to the TCnew and select it as bridge mode.
    Then go to the wireless tab, and create a wireless network of the same name and security as the TCold.
    You are probably in extend wireless now and that is wrong.
    The apple doco is here.
    http://support.apple.com/kb/HT4260
    What you want is called roaming network.

  • How do I connect my time capsule to iinet Bob ?

    How do I connect my time capsule to iinet Bob ?
    Just started with iinet naked ADSL, can locate/connect my time capsule - help please

    Bob is ok as a modem.. are you using voip?? If not bridge the bob and use PPPoE client in the TC..
    Or use Bob as a full modem router and bridge the TC.. either setup is much of a muchness.

  • How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

    How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
    I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

    Firstly how are you connecting to the TC.. wireless or ethernet?
    Please open a command window and ping it.. ping by name and by IP address.
    If ping succeeds at least by IP it should work.
    In windows explorer type
    \\10.0.1.1 (or whatever the TC ip is.. that is the default).
    Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
    7.6.4 firmware on the TC is useless. It works better on 7.6.1
    If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

  • I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

    LOL!!
    I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
    Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
    Do a search on ebay.. 3g router.
    But you can get the TC to join a wireless network.
    It is a non-standard setup that Apple will not support.. the option is hidden.
    If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
    But please note the end result of this setup..
    very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
    In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

  • How can I use my time capsule with windows7

    How can I use my time capsule with windows7?

    This is asked regularly.
    https://discussions.apple.com/message/10978060#10978060
    Look at the more like this. On the right column next to the post.
    Load airport utility for windows.. which will also load bonjour for windows.
    In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

  • You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    I tried to answer in your other post.. please stick to one thread ..
    What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

  • Can i connect my time capsule with my router as a bridge ?

    can i connect my time capsule with my router as a bridge ?

    I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
    The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
    Do you mean wireless bridge??
    If you mean wireless bridge the answer is maybe but unlikely.
    If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
    So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
    If you want specifics ask specific questions.

  • How do you replace a time capsule with a newer one

    How do you replace a time capsule with a newer one?

    LOL.. pull the old one out.. put the new one in. Setup the new one.. do not copy setting from the old one.. it is better to start over and never copy configuration files.. although you might get away with it.
    Plug the old TC into the new one.. change it to bridge mode.
    You can then access and copy old backups to the new TC if you want. Although IMHO just keep the old TC for 6months. .then wipe it and sell it or use in different role. Do start clean fresh backups on the new TC.
    If that is all useless. ask the specific question and we can try for a specific answer.

  • How I can configure my Time Capsule with my mobile me?

    Someone know how i can configure my Time Capsule with my mobile me?... Because i need access to my documents remotely, from any place where I find...
    (sorry my bad english)

    I think you're referring to the Back To My Mac feature?
    Follow these three articles. Most important are the second and third.
    http://www.apple.com/mobileme/features/mac.html
    http://support.apple.com/kb/ht1109
    http://support.apple.com/kb/HT3486

  • How to connect a time capsule with an ATT Elevate Hot Spot

    Hi,
    Need help connecting my time capsule to my ATT Elevate Hot Spot....since I have no ethernet connection.
    Thanks!

    Not sure how much we can help on this, but as a test, if you turn off the wireless on your MacBook and connect it to the router using an Ethernet cable, you should be able to log onto the Internet.
    If you can, you know the Ethernet connection is working, and it will be a simple matter to connect the Time Capsule to the router and get it set up.
    If you cannot get an Internet connection when you connect the Mac directly to the router, then more troubleshooting will be required.

  • How do i connect my time capsule from outside my home? i dont have static ip

    sorry about my english...
    its been 4 months now and still I am not able to connect my time capsule via internet from outside . i have read enough forums and discussion but i am confused because every discussion has different answer. please anyone can explain me the simplest way to configure my time capsule so i can connect it from other computers. i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    some questions.
    1. is it possible to use time capsule as nas using dynamic ip address?
    2. if yes how and where can i get exact detail about this.
    3. how to connect my time capsule form my iphone,ipad or other computers . connect through ip address or something else?
    4. is it any simple installation way to do this? i heard about bonjour and icloud but dont know how to connect through this.
    please help me
    thank you
    sachin

    i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
    Here is your primary issue.. you cannot connect with win7 ..
    Windows only offers SMB protocol which just about every ISP.. all responsible ones ...block..
    Time Capule offers AFP to internet and only AFP.
    You need to use a Mac to connect.. then use BTMM and iCloud as there is no dyndns in the TC anyway. (Actually there is a dyndns but only for apple btmm use...  you cannot access.
    If you want to or have to use windows.. then get a proper vpn router that offers vpn endpoints to windows and has dyndns.. setup the TC in bridge behind the vpn router and access via vpn .. this is the only safe way of connecting using SMB.

  • How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

    My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

    Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
    Click on the Wireless tab at the top of the page
    Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
    Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
    Then, you must power off your entire network...all devices....in any order that you want
    Wait a minute
    Start your modem/router first and let it run a minute
    Start the Time Capsule and let it run a minute
    Keep starting devices one at a time until everything is powered up
    If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
    Open System Preferences (gear icon) on the dock
    Open Time Machine
    Click Select Disk
    Click the Time Capsule to highlight it
    Click Use for Backup or, it might be Use Disk
    Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
    If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

  • How do I use my Time Capsule with hotel wired internet

    How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

    It may not be possible..
    If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
    Look up instructions on using ICS (internet connection sharing) in the Mac.
    eg for 10.6.8 http://support.apple.com/kb/PH6589
    eg http://support.apple.com/kb/PH10740
    Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

  • Connecting to time capsule with apple tv

    I am trying to figure out how to access the content on my time capsule with my apple tv.

    I assume that you have your iTunes Media folder located on the Time Capsule.
    If so, enable Home Sharing on the iTunes host computer. Do the same for the Apple TV and the media folder content on the TC will become available.

Maybe you are looking for

  • How do I put songs from the iTunes store into my playlists?

    I know this used to be possible. Has this feature been removed?

  • EP 6.0 on Oracle 9i 32 bit for Windows 2003 server x86_64 bit env Install

    We are facing issues while performing instalations of EPortal 6.0 on Windows 2003 enterprise edition server(X64 version) on AMD 64 bit processor.We have installed 32 bit Oracle software alongwith 32 bit SAP kernel 640 dumps We had to install oracle 9

  • Service Pack 3 Problem (maybe host2ior)

    Hello, I use RMI over IIOP from C++, the client(Client.exe), and It is accessing to RMI object. When Servcie Pack 3 was applied, Client.exe stopped in 'NamingContext::resolve()'. And couldn't get RMI Object. Length was wrong when it was compared with

  • HP Pavilion x360 Toucpad is erratic

    This is a new system purchased  J it an 15. I have not used   much as I am converting my data from Mac to PC.  I have from the beginning been having serious issues with the touchpad  cursor or any controls being all over the place and just doing what

  • Oracle FLEXCUBE 12.0.4.0.0 certification

    Is the Oracle FLEXCUBE Investor Servicing 12.0.4.0.0 certified to run on SLES 11 SP1+ systems? Where can I find a document that can confirm such certification? Is there a certification matrix for this product? I found in Oracle_FLEXCUBE_Investor Serv