How do I connect osx laptop to windows xp desktop?

Hi.
I would like to connect my macbook pro (running osx 10.6) to my desktop (running windows xp) for the purpose of sharing files between the two and also utilizing the wired internet connection of the desktop computer (no wireless).
Is this possible?
Thank you for any help you can provide.
Michael

Hello Michael,
I recommend reviewing the following articles when trying to setup File Sharing between a Mac and Windows computer:
Mac OS X 10.6: Connecting your Mac directly to a Windows computer
http://support.apple.com/kb/PH7116
Mac OS X: How to connect to Windows File Sharing (SMB)
http://support.apple.com/kb/HT1568
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

How can I connect my laptop with window to Apple TV

Hi
I'm just wondering if I need to airplay some file from my laptop is as a Dell xps with window operation system what should I do, is it possible.
Tnx

What kind of files do you have and what error are you facing while transferring them to your iTunes Library?
As Homesharing allows you to stream contents to your Apple Tv only if you have the file available in your itunes Library and both the computer and Apple Tv is connected to the Same Network and Home Sharing with Same Apple Id.

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

I have an airport extreme. i am trying to connect a laptop with windows 7 to a wireless printer, with no luck. any ideas?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

How do i connect my ipod to windows media player and sync song to it, how do i connect my ipod to windows media player and sync song to it

how do i connect my ipod to windows media player and sync song to it,

You do not. The iPod will only sync to iTunes.

How do I connect my ibook to my G4 desktop

How do I connect my macbook to my G4 desktop so I can use the DVD-ROM drive in my macbook to upgrade the software on the desktop unit. I only have USB cables and realize it will take awhile but can I do it. The desktop unit only has a CD-RW drive.

The CD-RW drive can read DVDs. It just can't write to them.

How do I connect my laptops with firewire cable

My old mac laptop screen has died. How can I connect the old laptop to my new macbook in order to see the hard drive of the old machine so that I can retrieve/print files from it?
I have a firewire cable, but when I connected the two, the old machine did not show up on the screen of my new laptop. What else do I have to do? Thanks

See this Knowledge Base article on how to do this: it's called Target Disk Mode.
Message was edited by: John Potts

How do i connect my laptop with my HP Photosmart C6180 Wireless

Hello, I need help.
I need to connect my HP C6180 All in One Printer with my laptop wireless.
I whent and follow the wizard on the printer and it says it's wireless now but when i click print from my laptop it says it's offline. so how do i get my laptop to see my printer or what do i have to do?
Please, please help me.

Sure. Let's make sure you have covered everything first. Download the basic guide here.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=1153494
Read it completely and follow the instructions to connect to your network. Keep careful notes if something goes wrong and let us know.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HT5628 How do I read OSX partition from Windows?

I am thinking of installing Windows 8 on my Macbook Pro using Boot Camp to create a dual boot system.
If I do this, how can I access my current Mac OSX partition from within Windows? Does boot camp mount the Mac OSX partition automatically?
If not, how can I share data between my Windows partition and Mac OSX partition?
(Apologies if this is an elementary question, but I couldn't see an obvious answer anywhere.)
Thanks.

If I do this, how can I access my current Mac OSX partition from within Windows? Does boot camp mount the Mac OSX partition automatically?
You can't access the Mac because it isn't running when you dual boot. You can purchase third-party software such as MediaFour's DriveOne to access the OS X partition. From OS X you will need a utility such as NTFS for Mac 10.0.2 or Tuxera NTFS 2012.3.6 to write to the Windows partition.

How to transfer RealPlayer downloads from a windows 8 desktop computer to iphone 5 s

I have 2 Problems:
1.
How to transfer downloads I made through RealPlayer on my Windows 8 desktop Computer onto my iPhone 5 s ?
2.
How to transfer purchases I made through ITunes on my Windows 8 Desktop Computer onto my iPhone 5 s ?
Thank you.

Bah, no reports in your System Details. No matter.
Can you give me your crash reports?
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and paste them into your response here.
This is what FFMPEG is
*http://en.wikipedia.org/wiki/FFmpeg
I don't use it nor have I heard of it outside of Linux.
I'm assuming you can uninstall it from your computer on the Control Panel's Remove Programs feature.

Session Restore isn't working!!!!!!!! Both my mac laptop and Windows 7 desktop no longer respond when I click "restore previous session" Please get this fixed asap, as it is my most used feature on FireFox!

System Restore is not working!!! Both my mac laptop and now my Windows 7 desktop will not allow me to restore previous sessions.

Try to use the "Restore Previous Session" entry in the History menu instead.
See also:
*[[/questions/892970#answer-271366]]

ITunes 7.7.1 CRASH when connecting to computer with Windows Remote Desktop

I upgraded to 7.7.1.11 and now when I connect to my computer with Remote Desktop iTunes crashes. Is this a known problem? If so, where can I download a previous version of iTunes that doesn't have this bug?
Contents of Error:
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. Please tell Microsoft about this problem. We have created an error report that you can send us. We will treat this report as confidential and anonymous. To see what data this error report contains, click here.
Error signature
appname: itunes.exe appver: 7.7.1.11 modname: quicktime.qts modver: 7.50.61.0 Offset: 00188860
Exception Information
Code: 0xc0000005 Flags: 0x0000000
Record: 0x0000000000000
address 0x000000000066988860
System Information
Windows NT 5.1 Build 2600
CPU Vendor Code: 68747541 - 69746e65 - 444d4163
CPU version: 00000681 CPU Feature Code: 0383fbff
CPU AMD Feature code: c1cbfbff
Erin: Module 1
itunes.exe
Image Base: 0x00400000 Image Sice: 0x00000000
Checksum: 0x0135124f Time Stamp: 0x4890a5ee

are you still at iTunes 7.1.0.59? to check, go "help > about iTunes", and wait for the version number to scroll up from the bottom of the screen.
if you've got a 7.1.0.59, try upgrading to 7.1.1.5:
iTunes 7.1.1.5 installer
do you still get the crash when playing music with that in place?

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

Unable to connect mac laptops and windows laptops on network at same time

Hi I have a wrt110 router which has a wired windows desktop attached. I also have several mac laptops connected wirelessly as well as an hp printer ,video game system blue ray player ,ipod,iphone and kindle all which connect with no problem. I have a pc laptop (Dell) which can see and connect to my network but does not connect to the internet . I tried disabling and even temporarily removing the antivirus software plus disabling the firewall but with no success. I am at my wits end because I need the pc laptop for work. The internet will connect to the pc laptop when I hard connect it into the router.
DSL through Earthlink .
Any thoughts would be greatly appreciated.
Solved!
Go to Solution.

Try this. Disable IPv6 on all Win 7 computers under LAN properties for both wired and wireless adapters. Reboot computers. Leave the MAC's turned off for now. Try to connect all the devices except the MAC's. If successful connect the MAC's and if they have issue's, disable IPv6 on those now too. Make sure the WRT110 on on firmware 1.0.04 or above.

How do i connect srs-x5 to windows 8.1?

it is not working and the rep that i spoke to was clueless

Hi damalijames,
Welcome to the Sony Community!
Sorry for the delayed response. May I just ask how you want to use the speaker to your Windows 8.1. If you want to use the speaker to output sound from your computer, you may use a 3.5mm male to male cord and connect one end to your computers speaker/audio out and the other end to the audio in of the speaker.
If my post answers your question, please mark it as "Accept as Solution"
Regards,

How do I connect a PC running Windows 7 Enterprise to the Mac Mini Server?

Hello!
I have a brand new iMac 27" with a PC partition on it. The PC side runs on Windows 7 Enterprise. My husband has a PC with Windows XP on it.
The brand new Mac Mini Server works fine for our macs, but the PCs are unable to connect. How do I get the PCs to see and connect to the Mini Mac Server?
Bente Mc

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Bluetooth, Networking, Airport and Wi-Fi
Dah•veed

How do I connect osx laptop to windows xp desktop?

Similar Messages

Maybe you are looking for