How do i connect srs-x5 to windows 8.1?

it is not working and the rep that i spoke to was clueless

Hi damalijames,
Welcome to the Sony Community!
Sorry for the delayed response. May I just ask how you want to use the speaker to your Windows 8.1. If you want to use the speaker to output sound from your computer, you may use a 3.5mm male to male cord and connect one end to your computers speaker/audio out and the other end to the audio in of the speaker.
If my post answers your question, please mark it as "Accept as Solution"
Regards,

Similar Messages

  • How do i connect my ipod to windows media player and sync song to it, how do i connect my ipod to windows media player and sync song to it

    how do i connect my ipod to windows media player and sync song to it,

    You do not. The iPod will only sync to iTunes.

  • How do I connect osx laptop to windows xp desktop?

    Hi.
    I would like to connect my macbook pro (running osx 10.6) to my desktop (running windows xp) for the purpose of sharing files between the two and also utilizing the wired internet connection of the desktop computer (no wireless).
    Is this possible?
    Thank you for any help you can provide.
    Michael

    Hello Michael,
    I recommend reviewing the following articles when trying to setup File Sharing between a Mac and Windows computer:
    Mac OS X 10.6: Connecting your Mac directly to a Windows computer
    http://support.apple.com/kb/PH7116
    Mac OS X: How to connect to Windows File Sharing (SMB)
    http://support.apple.com/kb/HT1568
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How do I connect a PC running Windows 7 Enterprise to the Mac Mini Server?

    Hello!
    I have a brand new iMac 27" with a PC partition on it. The PC side runs on Windows 7 Enterprise. My husband has a PC with Windows XP on it.
    The brand new Mac Mini Server works fine for our macs, but the PCs are unable to connect. How do I get the PCs to see and connect to the Mini Mac Server?
    Bente Mc

    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
    The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
    Bluetooth, Networking, Airport and Wi-Fi
    Dah•veed

  • How can I connect my laptop with window to Apple TV

    Hi
    I'm just wondering if I need to airplay some file from my laptop is as a Dell xps with window operation system what should I do, is it possible.
    Tnx

    What kind of files do you have and what error are you facing while transferring them to your iTunes Library?
    As Homesharing allows you to stream contents to your Apple Tv only if you have the file available in your itunes Library and both the computer and Apple Tv is connected to the Same Network and Home Sharing with Same Apple Id.

  • How do I connect my iPod to Windows??

    I Have this problem and I don´t know if this is the right place to ask. Anyway, I had My ipod formated on a Mac, but since in my school all they have are PCs i figured that I could sync, Charge and even listen there (I have the manually manage songs option cheked), I installed my ipod CD and when i conected it, it said that it didn´t have format or something like that so I can´t even take my files with it...
    How can I solve this??
    Because a friend of mine also has and ipod (formated on a PC) and when conected to my Mac everything seems to work just fine (meaning: it cherges and it can be listen)
    Hopefully I´ll find my answer, Thanks!!
    (Hope I made myself understood, I´m not and English speaker)

    Macs can natively read/write to a Windows-formatted iPod, but the reverse is not the case.
    Windows cannot read/write to a Mac-formatted iPod without the use of third party software.
    If you want to use your iPod on both platforms, your best bet is to use the iPod Updater utility on a Windows PC, and Restore your iPod.
    This will format it for Windows, and it will work on a Mac as well.

  • How do I connect my airport extreme to windows 8.1

    how do I connect my airport extreme to windows 8.1

    Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))

  • How do I Connect both an iBook and Power Mac G5 to Windows XP Pro network?

    I have an existing Windows network at home, with a Motorola Surfborad Cable Modem, Linksys Wired Cable/DSL VPN Router with 5-port 10/100 switch (BEFVP41), Linksys Wireless G Access Point (WAP54G), Linksys Etherfast 10/100 Workgroup Switches (EZXS55W v3) and several connected devices including: two Windows Desktops (wired), a Humax TiVo (wireless), Two (2) SlimDevice Squeezeboxes (wireless), and a Microsoft X-Box game system.
    For some reason, I cannot successfully connect either a Power Mac G5 (wired) or an iBook (wireless) to the newtork and internet. In both cases, if I attempt to connect them, the router does appear to see them, but I can't get connection to the Internet.
    Also, if I try to access either the Router or the WAP via their respective Access URL's: http://10.0.1.1/ & http://10.0.1.2/ nothing happens.
    I have disconnected all the other connected devices and tried to connect them with no results.
    Re-starting the cable modem, router or WAP didn't help.
    If I connect one of the Windows PC's to the same cable I have tried unsuccessfully with the Power Mac, The Windows PC connects to both the Network and Internet immediately!
    Additionally, I have checked out the entire wiring system, which are Cat5E cables. This included re-checking all connectors and testing each wire run. All cables are "straight through" with no opens, shorts or cross0overs.
    I am sure that I am doing something wrong and that there is an "easy fix", but it's beyond my meager knowledge.
    If someone can supply me with "Step by Step", detailed instructions on how to accomplish this, please help me.
    Sincerely,
    Gordy in Reading, MA - USA
    Power Mac G5, iBook & Windows Compat's   Windows XP Pro   Windows XP Pro SP2, Windows Home Network, Comcast Broadband Internet, Linksys Network Harrdware
    Power Mac G5, iBook & Windows Compat's   Mac OS X (10.4)   Windows XP Pro SR2, Windows Home Network
    Power Mac G5, iBook & Windows Compat's   Mac OS X (10.4)   Windows XP Pro SR2, Windows Home Network
    Power Mac G5, iBook & Windows Compat's   Mac OS X (10.4)   Windows XP Pro SR2, Windows Home Network
    Power Mac G5, iBook & Windows Compat's   Mac OS X (10.4)   Windows XP Pro SR2, Windows Home Network

    Hi Gordy,
    Well, that's certainly some setup you've got there.
    Also, if I try to access either the Router or the WAP via their respective Access URL's: http://10.0.1.1/ & http://10.0.1.2/ nothing happens.
    I'm not sure about those URL's. Plug your PowerMac into the router , then launch Safari and type 192.168.1.100 in the address bar it should allow you to access the routers settings via the web-based utility. Please check and see if that much that works and post back.
    Jrsy

  • How do I connect airport extreme to seagate hard drive using windows

    How do I connect airport extreme to seagate hard drive using windows?

    First the AirPort Extreme Base Station (AEBS) cannot share out an external HDD attached to its USB port unless it is formatted in either HFS+ or FAT16/32. It will not work if the HDD is formatted in either NTFS or ExFAT.
    If the HDD is formatted properly, when you access the AEBS with the AirPort Utility, does the HDD show up properly on the Disks tab of the utility?
    If it does, then you would access the HDD as any other network share, using the following format: //servername/sharename. In the case of the AirPort Disk (a HDD attached to the USB port of either an Extreme or Time Capsule), the "servername" would be the Extreme's Base Station Name, and the "sharename" would be the volumename of the HDD.

  • For a LAN network in my office, all laptops are Windows based and the internet is through LAN and other computer get connected with adhoc without the router. My Apple computer nor my iPhone 5 get connected. How do I connect to this Internet?

    In the office, All my colleges use Windows laptops. The Internet connection is out of LAN wire installed in one of the computers. Others use Internet by creating adhoc connection. However none of the apple products are being able to connect to this connection.How can i connect my MacBook Pro or iPhone 5 to this Internet network?

    Just how is the one computer connecting to the internet? What type of connection does the office have, DSL, Cable or is it a Data connection through a Cell phone provider.
    I doubt all other computer are doing Ad-Hoc but are probably Sharing the Internet connection with Internet Connection Sharing from that one Windows base PC.
    All you khave to do is Connect to that same WiFi SSID name and have the correct password for it.

  • How can I connect to a windows server from a mac book pro

    How can I connect to a windows server from a mac book pre?

    I have a Dell Power Edge T110 ii in the office that has files and software I need to access when away from the office, when I am on the road I use a mac book pro and an iPad.
    I am sorry if I am being a bit vague but this is all new to me, I have tried 3 IT guys but they can not find a way.
    Any help is greatly appeciated.

  • How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine

    How do I connect to Time Capsule from a Windows 8.1 machine which is on a Windows domain. I have been able to connect from a Windows 7 machine on a Windows domain to a Time Capsule. Airport utility is not displaying the Time Capsule Win8.1 machine.
    I have checked that the firmware has been updated to 7.6.4 . Similalrly the Win8.1 machine has been loaded with the update specified in another discussion.

    Firstly how are you connecting to the TC.. wireless or ethernet?
    Please open a command window and ping it.. ping by name and by IP address.
    If ping succeeds at least by IP it should work.
    In windows explorer type
    \\10.0.1.1 (or whatever the TC ip is.. that is the default).
    Having the airport utility for windows loaded can help the process. As it loads bonjour for windows.
    7.6.4 firmware on the TC is useless. It works better on 7.6.1
    If the ping does not succeed by either name or IP address yet you have internet through the TC, then your network is setup wrongly. You are have firewalls blocking local IP. Take down all the firewalls.

  • How do i connect a hp photosmart c4385 to a windows 2010 system

    My HP Photosmart C4385 printer only supports up to Windows 2000.  How can I connect a new computer to the network for my home.  It is wireless as well

    Hi there hayes54,
    Looks like the c4385 drivers go all the way up to windows 7. Take a look at this link. Select your operating system and download the drivers you need. Let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I just bought a new iMac and I am using a apple air port router.  How do I connect mt windows PC to the air port router do I can move files

    I Just purchased a 21.5 iMac and connected it to the Internet using a apple air port router.  How do I connect my windows PC to my air port router so I can transfer files.

    It makes life easier to install the airport utility for windows.. which has a couple of different apps in it.. if you airport is new type then the utility is too old.. but is still valuable for Bonjour which provides network information for shared devices in the apple world to windows.. and a disk access agent..
    It will also help the Apple computer access shared directory in the windows computer.. nowadays this is pretty easy.

  • HT5219 how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

    how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX

    Did you try to hook up both monitors to the Belkin adaptor? Trying will determine if your monitor has a bad input port. See if the Belkin adaptor is the problem. I have never used that specific adaptor, but I have always had luck with the Dr. Bott's DVI for ADC adaptor. Best of luck.
    www.drbott.com

Maybe you are looking for

  • How to delete duplicate photos in camera roll?

    I have pictures on my computer (not a Mac) I want to transfer onto my iPhone 5 but I already have some of them on my phone.  There are almost 2000 pictures and I don't want to go through each one individually to delete them.  Is there any app or easi

  • Individual itemRenderer for each item in TileList

    I currently have a tilelist with 6 items in it. I would like each item to be renderered slightly different. I know I can set the itemRenderer attribute of TileList but is it possible to set a different itemRenderer for each individual Object in the T

  • Is it possible to set the NLS_DATE_FORMAT for my sessions at apex.oracle.co

    Hi, Is this possible? I'm in the UK and getting the invalid month error when storing dates. Thanks in advance Bryan

  • Windows Media player ruined my playlist

    Hey was wondering if anyone here knew why at times sometimes your entire music library decides to add itself to your personal playlist and if there is a fast undo method or something. I had 70 songs in my playlist last night and i woke up to listen t

  • What is the right product for the electronic form?

    I need your help to choose an Adobe product. I need a product that I create an electronic form as a purchase order and when necessary, open the source file, fill the fields and saved in electronic format with the fields filled. What Adobe product doe