How do I connect the keyboard to my IPad?

HOw do I connect the keyboard to my IPad?
probably simple but I cannot seem to find the correct cord.
thanks if you can help.

IPad keyboards are connected to the iPad wirelessly via Bluetooth. You don't use a cable.

Similar Messages

  • How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
    But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
    Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret...

  • How do i connect my keyboard when it is turned on and the batteries are new, the bluetooth does not recognize it?

    I had a connection between my macbook pro and my wireless keyboard, when the keyboard stopped working.  I replaced the batteries, and it will no longer allow me to connect the keyboard.  In fact, my macbook no longer recognizes it at all when I try to reconnect via bluetooth.

    Yes, I've had a similar problem:
    My keyboard was connecting just fine except for recently when my son would switch to his user and then I would switch back after he finished his homework in another room in the house.
    Now I've restarted and there is no longer a Bluetooth option to click in System Preferences, and as I dig deeper into the Network option, I can click the Bluetooth PAN, but if I try to "add" a BT device or select "Advanced" the button is grayed-out and the message says BT is not available.
    The keyboard power cycles fine and is available to my iMac for pairing.
    My top of the screen menu bar shows the BT symbol, but tells me it's not available.  Whaaaat???
    Utilities' System Info tells me there is "no information available" when I click the BT devices under hardware.
    Somehow it appears I've either lost the BT drivers or the module has failed.
    Any suggestions??
    TIA, Bradley

  • How do I connect wireless keyboard to Tv

    How do I connect wireless keyboard to Apple TV

    Put the keyboard in pairing mode then go into the settings on the ATV and pair them.
    This is a bluetooth keyboard, correct?

  • How can I connect a keyboard Roland E86 to GarageBand 6.0.4?

    How can I connect a keyboard Roland E86 to GarageBand 6.0.4?

    You need a keyboard that will connect by Bluetooth. Have a look on the web. Cheers Brian

  • How do you connect wireless keyboard to ipad?

    How do you connect wireless keyboard to ipad?

    Go to Settings -> General -> Bluetooth. Turn on the iPad Bluetooth service and then the keyboard. They should find each other.
    BTW it's tricky to disconnect them. If you don't turn off the keyboard while it's paired, the iPad virtual keyboard won't work properly. Check the manual.
    The green light on the keyboard doesn't stay on all the time the keyboard is on, just for a few seconds after each change of state.
    The bluetooth keyboard - iPad combination is a very effective writing tool. The keyboard is very responsive.

  • Satellite Pro L100 - How do you remove the keyboard

    I have a L100 that has been 'watered'.... don't ask...
    How do you remove the keyboard.. any ideas please
    cheers
    bob

    Hi
    Silas is right. The keyboard is secured with 2 screws which must be removed.
    These screws are hidden under the thin cover near to the keyboard.
    Please be careful! The keyboard is connected to the motherboard with the flat cable!
    I dont know your notebook experience but if you dont know how to do it I would recommend contacting the technician for a help!
    bye

  • On my new iPhone, at the Apps store, I tried to make a purchase, the popup screen shows my Apple ID and asks for my password, but no keyboard appears so that I can enter the password.  How do I get the keyboard to appear??

    On my new iPhone, at the Apps store, I tried to make a purchase, the popup screen shows my Apple ID and asks for my password, but no keyboard appears so that I can enter the password.  How do I get the keyboard to appear??

    On your iPad, delete the existing account then sign back in with the new ID and password.

  • How do I get the keyboard on my macbook pro to light up?

    how do i get the keyboard on my macbook pro to light up?

    Welcome to Apple Support Communities
    What MacBook Pro have you got? Only Unibody MacBooks Pro (Late 2008 and newer) have a backlit keyboard. If you have one of these MacBooks Pro, you can set up its illumination in System Preferences > Keyboard. See > http://support.apple.com/kb/ht4882

  • How do you connect the iPad too, How do you connect the iPad to apple tv

    How do you connect the iPad to Apple TV

    On the same network and same apple ID with home sharing turned on they should connect.

  • After updating with ios7, I cannot proceed because I cannot enter my password since it uses Greek letters but the keyboard available is Latin. How can I change the keyboard to Greek?

    After updating with ios7, I cannot proceed because I cannot enter my password since it uses Greek letters but the keyboard available is Latin. How can I change the keyboard to Greek?

    try tapping holding on the key that would be most similar to the letter you want to enter, that will bring up a menu of other characters similar to that character and maybe the greek letter will be included in that menu

  • HT1688 How can I make the keyboard go away in an app

    How can I make the keyboard go away in an app

    Tap the keyboard icon in the bottom right corner.

  • How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

    How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
    Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

    Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
    http://support.epson.net/airprint/fw.html
    Regards.

  • How to inter connect the javascript and database?

    how to inter connect the java script nad database?
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)

    Which database?

  • How can i connect the Faulhaber Motor to MID-7654?

    How can i connect the Faulhaber Motor (3564 024BC, with Encoder HEDM 5500 B12) to MID-7654?
    The Motor has following wires:
    A: Hall sensor green; A: Phase brown; B: Hall sensor blue; B: Phase orange; C:  Hall sensor gray;
    C: Phase yellow; +5V: Voltage red; GND: Ground black
    The Encoder has:
    5: Channel B; 4: Vcc; 3:            Channel A; 2: Channel I (Zero impulse); 1: GND
    I don't know how I can connect the encoder to MID-7654 using these wires (what is Encoder Index? Instead of this i only have Channel I !) 
    Thanks!
    WLAN

    Unfortunately there are different designators for the encoder signal which NI refers to as encoder index. In your case I am pretty sure that the I channel is identical to encoder index.
    Other designators I have found are Z (z-ero signal) and R (r-eference signal) for the index signal.
    Make sure that the index signal is at the correct level. For most applications it should be active low (i.e. it should be at high level during most of a turn and go low when the index mark passes the opto switch, I think it should be like this on most if not all Agilent optical encoders as you have it on your motor. This happens for a very small turning angle only and is hard to detect when turning an encoder/motor manually, so if you try to find the index signal turn the motor/encoder veeery slowly.

Maybe you are looking for

  • Is it Possible to Promote DC on a Subnet With Connectivity to a Site DC But Not DC with FSMO Roles???

    I apologize in advance for the rambling novella, but I tried to include as many details ahead of time as I could. I guess like most issues, this one's been evolving for a while, it started out with us trying to add a new member  to a replication grou

  • Problem Importing XML Issue with FLAT MultiValued Field.

    I'm importing parts to my repository with a number of fields. This import is used to both UPDATE existing parts as well as add new parts to the catalogs. We want the fields in the import to be updated. There is one flat MultiValued Field that we need

  • Java Store Procs/Store Procs/Triggers

    Hi, I have cases in my application where I would require Store Procedures or triggers. Can I use Java Store Procedures, Regular Store procedures and triggers with iFS. Thanks, Mario

  • Varchar2 length

    Hi All I want to know the maximom length of varchar2 variable in formbuilder 6i . In its Help it was said max 2000 character. but in report builder the width of a user parameter could be 1 through 64K. 64k=64*1024 byte=65536 byte ---> 65536 char So i

  • What is the price model?

    I am very hesitant to spend time learning a new software without knowing the price model. I checked the FAQ and it basically says FREE for now... Any ideas?