How do I connect the MBP?

Hey guys,
I'm new to this so bear with me. I wanna connect my MacBook Pro to a Bose system through the optical digital audio on the MBP. How would i go about doing this? Do I need extra cables? If so, which ones?
this is the Bose system I have at home
[URL="http://www.bose.com/controller?event=VIEWPRODUCT_PAGE_EVENT&product=321gsx_dvdindex"]http://www.bose.com/controller?event=VIEWPRODUCT_PAGE_EVENT&product=321gsx_dvdindex[/URL]
lol....is it even possible to hook up the MBP to this? :confused:
any help would be greatly appreciated
thanks

From the technical specs it looks like you should be able to use the optical inputs. You need to buy an optical input cable. You can buy an one from Apple here: Belkin PureAV Digital Optical Audio Cable with Mini-Toslink Adapter
After that, you just plug it in and make sure that the Sound panel on System Preferences is set to Line Out. It will say Internal Speakers unless you have a cable plugged into the audio out line.
MacBook Pro 2.16 1 GB 100 GB 7200 RPM   Mac OS X (10.4.5)   Mac mini 1.42 1 GB; PowerMac 450 MHz (Upgd. 1.2 GHz)

Similar Messages

  • How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
    But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
    Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret...

  • How do you connect the iPad too, How do you connect the iPad to apple tv

    How do you connect the iPad to Apple TV

    On the same network and same apple ID with home sharing turned on they should connect.

  • How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?

    How can I connect the ipad2 to an Epson Stylus SX445W wifi printer?
    Any help appreciated. Obviously I'm not technically minded so simple... Sorry... Very simple instructions would be great. Thanks

    Does the iPad come up with a "no AirPrint printers found" message? If so, the most common fault is that the printer isn't on the same WiFi network as the iPad. Your printer may also need a firmware update. Epson has some support information here that may be of help:
    http://support.epson.net/airprint/fw.html
    Regards.

  • How to inter connect the javascript and database?

    how to inter connect the java script nad database?
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)

    Which database?

  • How can i connect the Faulhaber Motor to MID-7654?

    How can i connect the Faulhaber Motor (3564 024BC, with Encoder HEDM 5500 B12) to MID-7654?
    The Motor has following wires:
    A: Hall sensor green; A: Phase brown; B: Hall sensor blue; B: Phase orange; C:  Hall sensor gray;
    C: Phase yellow; +5V: Voltage red; GND: Ground black
    The Encoder has:
    5: Channel B; 4: Vcc; 3:            Channel A; 2: Channel I (Zero impulse); 1: GND
    I don't know how I can connect the encoder to MID-7654 using these wires (what is Encoder Index? Instead of this i only have Channel I !) 
    Thanks!
    WLAN

    Unfortunately there are different designators for the encoder signal which NI refers to as encoder index. In your case I am pretty sure that the I channel is identical to encoder index.
    Other designators I have found are Z (z-ero signal) and R (r-eference signal) for the index signal.
    Make sure that the index signal is at the correct level. For most applications it should be active low (i.e. it should be at high level during most of a turn and go low when the index mark passes the opto switch, I think it should be like this on most if not all Agilent optical encoders as you have it on your motor. This happens for a very small turning angle only and is hard to detect when turning an encoder/motor manually, so if you try to find the index signal turn the motor/encoder veeery slowly.

  • How can i connect the PO to Document No...pls help it urgent!

    Hi gurus!
    How can i connect the PO no. to Document NO. pls specify the tables and fields.. tnx!
    Regards,
    Mackoy

    Hi,
    the document no. that is attached to PO at tcode <b>ME23N</b>..what should i do?
    Tnx!
    Regards,
    Mackoy

  • HT1212 how can i connect the iPad to the iTunes if the iPad is locked

    how can i connect the iPad to the iTunes if the iPad is locked

    If you can't do the restore then you will need to try recovery mode.
    Read this: http://support.apple.com/kb/ht1808

  • How do I connect the keyboard to my IPad?

    HOw do I connect the keyboard to my IPad?
    probably simple but I cannot seem to find the correct cord.
    thanks if you can help.

    IPad keyboards are connected to the iPad wirelessly via Bluetooth. You don't use a cable.

  • How do you connects the same iPad to iTunes which is already synced with another computer

    How do you connects the same iPad to iTunes which is already synced with another computer

    You can only use one iTunes library at a time when you sync your devices. If you want to sync to a new computer now, look at this.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive
    And here is another helpful article.
    http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/

  • How can i connect the mac with internet key?

    how can i connect the mac with internet key?
    I try but it tolds me that I haven't the javaruntime...

    I try, but to run javapreferences computer told me that I must have a Java runtime... thankyou

  • How can I connect the polaroid 6500 ultrasonic sensor ranging module to DaNI 2.0 robot (which is using sbRIO 9631)?

    How can I connect the polaroid 6500 ultrasonic sensor ranging module to DaNI 2.0 robot (which is using sbRIO 9631)?

    check this post
    http://forums.ni.com/t5/Real-Time-Measurement-and/sensor-on-sbrio/m-p/2030424#M11812

  • How can I connect the first generation ipod to macbook air?

    How can I connect the first generation ipod to macbook air or macbook pro? Using an adapter?

    macbook air
    The only theoretical solution is an USB ExpressCard adapter and FireWire ExpressCard. I don't know if anyone's actually attempted it.
    macbook pro
    A FireWire 400 to 800 cable or adapter, also known as 6 pin to 9 pin.
    (53970)

  • HT201177 My Face time device is working, but I can't make a Skype video call. How do I connect the camera when I am on a Skype video call?

    My built in Face time device is working, the green light on top of my iMac is on, but when I make a Skype video call the other party cannot see me, even I can see them. How do I connect the built in camera to my video Skype call? Thanks for your help, Helmut

    Assuming you have set up your Preferences correctly in Skype, sometimes Skype doesn't seem to automatically trigger the camera. When that happens just click on the camera icon that appears at the bottom of the screen when making a call:

  • HT4356 I  from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!

    I  am trying to airprint from an iPad , but get, " no AirPrint printers found" , how can I connect the two devices?(I have followed all the usual network steps!

    Make sure you have a AirPrint enabled printer.
    http://support.apple.com/kb/ht4356

Maybe you are looking for

  • Shuffle's Random Erratic Behavior

    I might as well start my own post, since I can't get a straight answer anywhere. When I connect my shuffle to any of USB 2.0 ports, any of the following may happen: 1. Rapid green blinking light, Shuffle NOT recognized by Windows Explorer, NOR iTunes

  • How to resolve deadlocks besides using retry?

    We have a case to load 100 documents to the BDBXml containers, and we plan to use multi-threads. Two tests were issued: 1) The 100 documents will be loaded to one container. 5 threads were spawned. While in one thread, the document was being loaded,

  • Work with Application Services in CAF

    Hi. I have a composite application en NWD 7.3, my project has a little custom Framework which implements basic operations (CRUD) , the methods of these operations are exposed as web services. Also the project has some external services. My question i

  • OBIEE Error in Logical column

    Hi, I want to use dynamic variable and filter the dates. I am creating new logical column in BMM using the below case statement. I am getting the error.Please suggest me for this issue. CASE statement: CASE WHEN VALUEOF(CURRENT_MONTH_FNC_STG) = '08 2

  • Ralph... here's another one for you

    I've had this problem where I can talk to Craig, Craig can talk to Joe but I can't talk to Joe. I've now fixed it so I can ANSWER an invitation from Joe and chat fine. However, if I call HIM, he sees the invite, tries to accept, then basically locks