How do I connect to a Wi-Fi network with Windows 10?

QuestionHow do I connect to a Wi-Fi / wireless network with Windows 10?
AnswerNote: This article describes connecting to wireless networks in Windows 10. Separate articles exists for doing this in Windows 8 and Windows 7.
To connect to a wireless network in Windows 10, follow these simple steps:
Select the wireless icon in the bottom-right near the clock. If you don't see it, you might need to press the up arrow to see more icons.
A panel will open on the right that lists detected wireless networks.
At the bottom of the panel, you'll see buttons for Wi-Fi and Airplane mode.
Ensure Wi-Fi is enabled and Airplane mode is disabled.
Select your wireless network from the list.
You can check the box next to Connect automatically if you prefer.
Now select Connect.
If it requires a password, it'll prompt you. In that case, enter your credentials and follow the prompts.
You can also watch this video showing how to connect to Wi-Fi with Windows 10:

What are you trying to do the password on .. I have never noticed that it is limited to specific lengths unless you use WEP.. surely you don't use wep.

Similar Messages

How do I connect an iPhone 5S or 6 with audio video cables?

How do I connect an iPhone 5S or 6 with audio video cables? Our van only has these connections. Apple did have a cable that worked with the 4/4S, but it does not work with an adapter on the 5S. I want audio only.

I Thought I probably was.
something like this should work then, right?
Belkin Y Audio Cable (12 foot) https://www.amazon.com/dp/B000067RBT/ref=cm_sw_r_awd_fYWzub11XY5MQ
OR
eForCity 3.5mm to RCA Auxiliary Cable Cord for iPod/MP3 https://www.amazon.com/dp/B0042DIZTE/ref=cm_sw_r_awd_R0Wzub1X33PD9
thx SO much )

How can I connect to a database from ipaq with cldc??

how can I connect to a database from ipaq with cldc??

Hi Again
There is a library by Mimer which allows you do connect to a Mimer SQL Server, don't know must about it, but here is a link.
http://developer.mimer.com/
If that doesn't suit you, I suspect that you will have to use some sort of proxy solution. Either by creating a servlet to accept the sql string you want to send, or by creating your own custom proxy server running J2EE. The servlet or the proxy server must be able to receive an SQL String, do the query to the actual database and return the results in some sort of format to the mobile device. Maybe just a space delimited string.
Hope this helps
-Daur

How do I connect dual monitors to my x61 with docking?

How do I connect dual monitors to my X61 with docking?

There are some ideas in this thread
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA

Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
    On some models you need set Factory defaults to USER and turn on the RS-232.
    Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
     You must get this working before continuing.
      You can set the COM port parameters by right clicking and selecting Properties.
     (On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
    On the left side, click on Devices and Hardware.
    Click on Serial and Parallel.
    Go to the COM port you found in Device Manager.
    Open a VISA Test Panel.
    Now I don't have one I can look at right now, so this is general idea:
   Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
   Go to the (I think) Input Output tab (you want to send a command)
   The command string input should already have a *IDN? entered, if not, type it in.
   Click on the Query button to send the command and check the response.
   If you get an ID string back (Company name, Model, FW Version ...) then it works.
   (Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

How do i connect to an OHP (Overhead Projector) with MacBook Air?

How do i connect to an OHP (Overhead Projector) with MacBook Air? Is it possible? What leads would I need?
Thanks.

Good question! The simple answer is, I haven't the foggiest idea. I will be going abroad, so don't know what kind of OHP i will have to use. I have a lead that connects with a tv (HDMI - I think). But am not sure about OHPs.

Can i use connected drive on a desktop computer with windows xp

i am interested in connecting my wife's desktop pc with windows xp to my hp all in one pc with windows 8.1, via connected drive. is this possible and if so how.

Hi,
Looks like a no, no, no. You can use iOS (Apple), Android but not others:
http://support.hp.com/us-en/product/HP-Connected-Drive/5401260/model/5401261/how-to
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hello. I have an ipod classic generation 4 and I want to add some more music to it however my computer and itunes do not recognice it when I try to connect it. Is it incompatible with windows 7 or itunes?

Hello. I have an ipod classic generation 4 and I want to add some more music to it however my computer and itunes do not recognise the device when I try to connect it. Is it incompatible with windows 7 or current version of itunes?

It should still be compatible. Have you tried plugging it into a different USB port using a different cable to see if that helps? Perhaps, try it another computer as well to see if it's recognized there.
Otherwise, start by checking to see if it's even recognized in Device Manager. See this article for details.
http://support.apple.com/kb/ts1496
B-rock

Why can't I connect to a Wi-Fi Network with 7 or below digit password? What should I do?

I can't connect to a Wi-Fi Network with just 7 or below digits of password. What should I do?

What are you trying to do the password on .. I have never noticed that it is limited to specific lengths unless you use WEP.. surely you don't use wep.

Why can't I connect to my home WiFi network with my new iPad Mini?

Why can't I connect to my home WiFi network with my new iPad Mini when I can connect to free WiFi networks at cafes and public areas?

Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

How do add .mov files in Premiere Elements 11 with Windows 8? I get a generic error message.

Hi Steve,
Thanks for your quick response. The original movies were taken on a Canon ES970 (1990's). I don't know the resolution but things were not as high tech back then.,.. I used a Roxio software to convert them on my MacBook Air. I didn't realize that I could use Adobe Premiere Elements to do that or I would have. However my old camera did not have a cable to attach it to a computer and the Roxio software came with it.
I then saved the recordings on an external hard drive. I did not make movies from them using iMovie or edit them in any way. They are simply .MOV files and they can be played on my Mac. Upon realizing how much memory it takes to work on videos, I decided it might be easier to burn DVD's on my husband's new Dell desktop that came with Windows 8. I downloaded Quicktime as suggested and still the movies can't be added to Premiere.

When i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well

when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

How do i know if my itunes is compatible with windows 64 bit?

How do i know if my itunes is compatible with windows 64 bit?

Did you download the 64-bit installer?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

With windows 7 when y connected my Iphone Itunes open . With windows 8 I have to open itunes manually ??

With windows 7 when y connect my Iphone Itunes opened . With windows 8 I have to open itunes manually ??

I too am having this problem. I've noticed that it seems to do it more often when i'm in full screen mode, if there is something downloading or i try to play something within the first minute of opening. Also, finding a lot airplay issues and playing to apple tv is a nightmare without a LAN connection. Anyone got a solution?

How can I make multi partitions in my computer with Windows 7??

How can I make multi partitions in my MakBook with Windows 7??

From what I read you can't. If you used Boot Camp to partition the Macintosh hard drive so you could install Win 7 on a boot camp partition you are locked into that one partition.
If you try to RE-partition that BC partition Win 7 won't boot, and IIRC there is a possibility of OS X not booting (Not sure about that). I just went through this myself.
That's one of the big reason I have gone back to Win PCs as my main systems.
Mac's are OK but to restrictive in what you can do with the hardware, and the OS IMHO.

How do I connect to a Wi-Fi network with Windows 10?

Similar Messages

Maybe you are looking for