How do I connect to Airport express with my iMac?

I am trying to connect my iMac to my Airport Express.

Sorry, the AirPort Extreme and Time Capsule would be in the same boat as far as their USB ports. However, if a multifunction printer is network-ready, meaning that it can connect to an existing network by Ethernet or by wireless, then it could connect to the AirPorts by one of those means and have all of its functionality.
For example, I have an HP Officejet 6500. This multifunction printer has both Ethernet and wireless capability. I have it connected by wireless to one of my AirPort Extreme Base Stations and I am able to both scan and fax with it from my Macs or PCs in this configuration.

Similar Messages

How do i connect my airport extreme with my airport express

how do i link my Airport Express with my Airport Extreme?

Hello Bob -
I have an Apple Extreme (5th Gen) and I have tried to extend my network with an Apple Express Model No. A1264 with the ethernet connection. It does not seem to work, and has crashed my network twice. When I did get it to work, the wireless crawled. When I took the AirPort Express off of the network the speed went back up.
Can this be done to extend the network, as I have the Extreme in the basement where the cable comes into the house, and I have two other floors that need wireless access. Any suggestions for this older model AirPort Express?
Thanks.

Itunes will not stay connected to Airport Express with any Yosemite update.

Since installing Yosemite (original and updates) my itunes will no longer stay connected to Airport Express on my iMac. Any ideas?
I have no probblem at all when using ipad or other devices.
Matt

Hello mtvessell,
If you are having issues connecting to the iTunes Store, then start with the article below for some general troubleshooting to get it sorted out. If it continues, then take a look at the second article for additional support.
Can't connect to the iTunes Store
http://support.apple.com/en-us/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/en-us/TS3297
Regards,
-Norm G.

How to set up the airport express with a linksys wireless-g broadband router

I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

If that is all that is done, the Express would not provide more wireless coverage. Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area. As per my above comment, one Express connects via Ethernet to the Linksys. The second Express provides the extension.
You must have misunderstood what I was saying.
Linksys is providing a wireless network.
The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
The Express is located on the other side of the house, for example.
The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
The Express is configured in Bridge Mode
This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
Although this is an "extended" network, it is technically known as a "roaming" network.
This is what I was suggesting as a possible alternative without having to buy more hardware.

Can no longer connect to Airport Express with upgrade to iTunes 10.1

Since I upgraded to iTunes 10.1 I can no longer connect to my Airport Express (unknown error-15000). Another computer on my betwork running an older version of iTunes still works on the Airport Express.
Any ideas? I have tried to uninstall and reinstall airport express with no success.

Rather than disabling the firewall, try making sure you've got exceptions in it for BonJour. Although the following document is about a different error message, the instructions in there are worth trying. (At step 7, make sure there's an exception for BonJour as well.)
[iTunes for Windows: Bonjour alert due to firewall, security, or proxy software|http://support.apple.com/kb/TS3448]

How can I Connecticut two Airport Express with One Time Capsula?

Only by Wifi or by LAN in a row?

What are you trying to accomplish with the AirPort Express devices?
Where will the Express devices be located in relation to the Time Capsule?
If you are planning to use the Express devices to "extend" the wireless range of your network, Ethernet LAN will always provide far better performance than trying to connect the Express devices using wireless only.
You have the option of connecting both AirPort Express devices directly back to two LAN <-> ports on the Time Capsule....or....connecting one Express back to the Time Capsule and then connecting the second Express to the first Express using Ethernet. This assumes that you have a "new" Express with both WAN and LAN ports.
If you choose wireless only, both Express devices will connect back directly to the Time Capsule, so both of them should be located where they can receive a strong signal from the Time Capsule wireless.
A "hybrid" approach can also work. Connect one Express to the Time Capsule using an Ethernet cable and then setup the second Express to connect to the first Express using wireless only.

Connect to airport express with windows 7

I don't see the icon on itunes to connect to Airport Express. I have Windows 7 and itunes 10 installed. Any suggestions?

support.apple.com/downloads/. You need the Windows version of Airport Utility.

How do I include my Airport Express with my base Airport Extreme to extend my in house wireless network??

How do I set up wireless network extension/expansion adding Airport Express to existing Airport Extreme Network??

OK, thanks for the clear information, this really helps.
Locate the AirPort Express about half way between the AirPort Extreme and the general area that needs more wireless signal coverage. The more that you have line-of-sight between the AirPort Extreme and AirPort Express, the better the performance will be.
Power off the AirPort Express for a few minutes
Hold in the reset button firmly...and keep holding for an additional 10 seconds while you simultaneously plug the power cord back into the back of the AirPort Express
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light
This process is tricky.....you almost have to have 3 hands to do this.
If you have an iPad or iPhone, the setup is almost too easy to be true. In that case.....
Tap on Settings (gear icon) on the home screen
Tap on WiFi
Under the heading of Setup a New AirPort Base Station....
Tap on AirPort Express
The utility will analyze things for a minute, then suggest that the Express be configured to extend the AirPort Extreme network
Type in a device name that you want to use, then tap Next
The utility will set up everything for you automatically. When you see the message of Setup Complete, tap Done and you are good to go.
If you want to use the Mac running (10.6.8) for the setup.......
Make sure that the wireless is turned on at the Mac
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select the AirPort Express and click Manual Setup
Click the Base Station tab under the row of icons
Enter a device name for the AirPort Express
Enter a device password for the AirPort Express
Verify the device password
Adjust the Time Zone setting
No other adjustments are needed here
Click the Wireless tab below the icons
Set the Wireless Mode to Extend a Wireless Network
Click on the Wireless Network Name box and your AirPort Extreme network name should appear as a choice. Click to select that....or manually enter the exact name of the AirPort Extreme wireless network
Make sure that Wireless Security is set to use WPA2 Personal
Enter the wireless network password for the AirPort Extreme
Verify the wireless network password for the AirPort Extreme
Click Update at the lower right of the window and wait a full minute for the Express to restart. A green light on the Express at this point will be a very good sign that things are up and running correctly.
Your Mac will automatically select the AirPort with the best signal quality. If you have an iPhone or iPad, you may need to manually turn off the WiFi when you move the device near another AirPort, and then turn WiFi back on to get the iOS device to connect to the best signal.
Good luck, please post on your results with the method that you choose.

How do I connect my airport Express to the internet connection of my Macbook Pro without an ethernet cable?

I would like to use my Airport Express (802.11n) to provide audio in another room for a pair of powered speakers, however the iTunes remote software for Android requires (for some dumb reason) an internet connection so I can't control iTunes
So my computer is connected to a cabelmodem via ethernet and the Express has established a network connection with the computer
How do i give the Airport internet access without an ethernet cable?

To share your Internet connection from your laptop, select 'Sharing' in 'System Preferences' and enable 'Internet Sharing'.
http://support.apple.com/kb/PH13855
You will need to set a WEP key. You may need to root the system do some things at the command line. I recommend against that.
Laptops don't work well as routers but it is possible.
Hook up the AirPort express to the laptop using an Ethernet cable and configure with the AirPort utility as if you are setting up a print server or base station. The Android should see the AirPort Express after that.
http://support.apple.com/kb/ht4587
https://discussions.apple.com/thread/2312443
This might work better if you used the AirPort Express as a base station instead of trying to use the laptop as a base station. Then your Android would have Internet access.

How do I use an airport express with the Apple A1121 speaker?

I have the old Apple A1121 speaker, and have only just stumbled upon the fact I could play music from my MacBookPro or other apple device through the AirPort Express wirelessly. But I don't understand how to do it? Any help would be much appreciated.

No, actually a really good question. The adapter is basically a 3.5 mm audio plug on one end and a digital optical jack on the other. It is designed to be used with a digital optical cable. Some cable providers have these in one unit. That is, the adapter is permanently attached to one end of the cable.
The following link is just one example of these types of cables/adapters.

Problem iPhone WiFi Connection to Airport Express with static IP addresses

We have our Airport Express configured on the LAN with a fixed IP. It is not distributing IP addresses, or providing DHCP services; it simply links the WiFi to the LAN.
To connect via WiFi you set a static IP for the wireless device and enter all IP information by hand (IP/Router/Mask/DHCP etc). Laptops can connect fine, and use the network.
The iPhone connects to the wireless network ok (we tried with security on and off), however, it seems to be unable to successfully use the network. Any attempt to browse a web page using a numeric IP address, or regular IP address, fails.
Has anyone successfully used the iPhone on a WiFi network with static IP addresses, and a Wireless access point that also uses a static IP address?

The problem with static IP on iPhone was caused by the IP address being blocked by over-zealous network manager...

How can I connect multiple airport express to airport extreme?

I have an Airport Extreme that is connected to my cable modem. I have 3 Airport Express that I would like to connect to the extreme to extend the signal in my home. I was able to connect 1 but I have been unable to successfully connect the other 2.
Can anyone tell me how o accomplish this?
Thanks

Power off all four AirPorts in any order that you want
Wait a minute, then power up the AirPort Extreme
Wait another minute and power up the AirPort Express that is working
Move the other two Express devices to the same room or close proximity to the AirPort Extreme
Power up one Express for a minute or two and leave the other Express off for now
Hold in the reset button on the back of the Express for 10 seconds and release
Allow a full minute for the Express to restart to a slow, blinking amber light status
Click the WiFi icon at the top of the Mac's screen
Look for a listing of New AirPort Base Station
Just below that, click on AirPort Express
That will start up the setup wizard. It will take minute to analyze things and then suggest that the Express be configured to extend the AirPort Extreme network.
Enter a short simple name to call the Express, something like Express2 for example, and click Next
The utility will set thing up for you. When you see the message of Setup Complete, click Done
Now move the Express upstairs and power it up. If the signal must pass through a ceiling, that is a tough assignment, since the ceiling is likely absorbing about half of the signal going through
Report on your results

How can i setup my airport express with my retina display macbook, how can i setup my airport express with my retina display macbook

Hi i have a macbook pro with retina display and these mac doesnt have a lan port, so i cant connect the aiport express to my mac with a cable.
Thanks for the help

You would need the AirPort Utility app for your iPad in order to administer the AirPort Express. Note: The version of this AirPort Utility will not support older 802.11g AirPort base stations. The AirPort Utility is available from the Apple App Store.

How do I connect the airport express base station to the DSL modem? Can it be done wirelessly?

Can the airport express base station be wirelessly connected to the DCL modem?

Alan1111 wrote:
Can the airport express base station be wirelessly connected to the DCL modem?
Alan,
Please provide more information. (Make/model of the modem and airport express, Mac OS version, etc.)
Most likely your modem is the source of your internet connect and you sound like you are trying to extend your network through the airport express (which is a router).
I don't know what a "DCL modem" is. Perhaps you meant "DSL".
Most internet modems are either a "Cable Modem" or a "DSL Modem".
Time Warner (TMC) and Comcast typically provide cable modems, which use a coaxial (round) cable.
"DSL Modems" are used with AT&T and they are connected to your telephone wires.
Both of these types of modems usually includes a router built-in, some include a wireless router, too.
Either way, I don't know of any way to connect an Airport base station to a router wirelessly.
That would be called a "bridge" in networking terms and while it may be possible, it is not common.
Most routers use a direct ethernet cable connection, because the data flows much faster than wirelessly.
Normally, one connects to their airport base station with an ethernet cable from the primary home/office computer.
It can be accessed wirelessly, but only if you enable that option in the Airport utility (not the default).
Again, connecting or bridging one router to another router is not a common method.

How do I use my Airport Express with a Blu-ray player?

Hello, first post, long time lurker. Have a question, hope someone can help me
I have an Airport Express V 6.3, currently I have it set to 'Join a wireless network' and its connected wirelessly through a Netgear router that is located on the 1st floor, I'm on 3rd floor by the way. I've been using it for airtunes, but I recently received a Sony Blu-ray Player and would like to connect it the airport express via ethernet cable.
What do I have to set up on the airport express to be able to give the blu-ray player internet?
I've noticed many threads here about airport extreme connected to express...so they weren't too helpful

Welcome to the discussion area, mareithree!
You'll need the 802.11"n" version of the AirPort Express to be able to "Enable ethernet clients" and connect the DVD player. Unfortunately, your older version of the Express does not allow this type of feature.

How do I connect to Airport express with my iMac?

Similar Messages

Maybe you are looking for