How do i connect to the TV with a thunderbolt?

When i connect my MBP to my TV with a minidisplay to HDMI adapter to the Thunderbolt connection, it does not work. When i go to the screen window, no button to search for the TV appers.

I got the same problem, when I change my Powerbook to a Macbook pro... The answer, is there is no datacard available... not yet..
The solution is to have a bluetooth phone that support 3G... (GPRS is a bit slow)
So, just follow the instruction on that website to set-up your connection...
http://pukupi.com/articles/vodafone/
You still have to get from vodafone some information if you don't have them... Make sure you ask them the good question, sometime the techi guys freak out when you say you want to connect a MAC...
what you need is :
GPRS CID String
Username
password
In Ireland it's as follow :
GPRS CID String : *99#
Username vodafone
password vodafone
you could try... if it work, you are in... Make sure you watch the data you transfer, it can get VERY EXPENSIVE... I would suggest Email access only... try avoid downloading file.
Hope it help.
MCBP 2.16 Mac OS X (10.4.7)
MCBP 2.16 Mac OS X (10.4.7)

Similar Messages

How do I connect to the internet with my new IPAD ?

How do I connect to the internet with myt new Ipad

See here for connecting to the Internet:
http://support.apple.com/kb/HT1695
If you have any problems there is troubleshooting advice here: http://www.apple.com/support/ipad/wifi/

How do i connect to the internet with my ipad?

how do i connect to the internet with my ipad?

Did you turn WiFi on in the Settings App? If WiFi is turned on, your iPad should be able to see any WiFi networks that you can connect to and you should be able to tap on one of those, enter a password if needed and then tap the join button.
I get the feeling that you know this and the problem needs further explanation so ... Can you explain in more detail?

How do i connect to the internet with apple tv

how do i connect to the internet with apple tv

Ethernet cable from your router, or configure wifi in Settings.

How do I connect to the internet with Airport for the first time?

I just got my Airport express and I've been trying to configure it to connect to the internet but it doesn't work and I can't find info on the configurations. I have an ethernet "modem" which I used to connect the cable coming from it to the computer and now I connect it to my Airport. Although the green light is on and in network preferences, it tells me I'm connected to the internet, I can't browse the internet with Safari, etc. I've been trying to find information on how to configure the base station in Airport Admin Utility but there is no specific information. Is there anyone who could help me telling me how to set up the IP adress, if I need one, DHCP, preferences in Airport Admin Utility?? If the ethernet cable is connected to the computer directly I don't need a user ID or anything... It's all setup automatically.

As a minimum, in order to gain access to the Internet with an AirPort Express base station, you will need an Internet Service Provider (ISP) AND an Internet modem or gateway device.
What is the make & model of the Internet modem or gateway device that you have the AirPort Express directly connected to by Ethernet? What exact model of Express do you have?

TS1398 How do I connect to the internet with my iphone when away from home

I have an iphone 3GS which was fine , was able to connect to the internet away from home when at uni, at appointments. Since software update to IOS 6.0, can now only connect to internet wirelessly when at home-as soon as leave the house it disconnects. Is this just because of the software update? Have tried adjusting settings but got nowhere. Thank you

When your wifi is off. Do you see your carrier name at the top left with either 3G/4G. If not you can try a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.
or settings - cellular - cellular data - ON
if those two suggestion doesn't help then you will need to contact your phone carrier to resolve the issue.

How do I connect to the internet with Airport Expess?

In Airport Utility I get an orange icon and the Airport Express light is green. In the internet box
coming from the globe picture it says Interent connection Disconnected and there is no router address
and no DNS server information shown.

As a minimum, in order to gain access to the Internet with an AirPort Express base station, you will need an Internet Service Provider (ISP) AND an Internet modem or gateway device.
What is the make & model of the Internet modem or gateway device that you have the AirPort Express directly connected to by Ethernet? What exact model of Express do you have?

How do I connect to the internet with the "Manual" PPPoE option?

Hi,
I have a Time Capsule and a PC with Windows XP SP3, Airport utility 5.3.2
I connect to the ISP using a secureID - a password that changes every minute.
This means that if I use the "Always On" option, then once the connection breaks the time capsule will retry with an invalid password and lock me out.
I therefore tried the "Manual" option, but there is no "CONNECT" button associated with it. When I choose "Always On", the time capsule connects to the internet. When I choose "Manual" the time capsule has a happy green light, but I don't have internet.
Did somebody forget to put a "connect" button somewhere, or is it just hiding?
Any help appreciated.
Thanks,
Omri

Ethernet cable from your router, or configure wifi in Settings.

How do I connect to the internet with a datacard?

Hi, I have just brought a mac book pro and am in the process of finding an ISP. I don't have a BT line and don't want to pay for one, so it narrows down my options! I have checked out NOW wireless internet and cable but they don't work in my area (NW2 london). I don't have a sky box. So looks like the best option for me would be a datacard I could plug into my laptop. Only prob is that most of the major ph companies only have the PCIMA cards which won't work in the new macs. Vodafone is bringing out a new card in autumn which will work, but does anyone know anyone who makes cards which will work on my mac now?
Thanks so much!! I have looked long and hard on internet and can't find any!

I got the same problem, when I change my Powerbook to a Macbook pro... The answer, is there is no datacard available... not yet..
The solution is to have a bluetooth phone that support 3G... (GPRS is a bit slow)
So, just follow the instruction on that website to set-up your connection...
http://pukupi.com/articles/vodafone/
You still have to get from vodafone some information if you don't have them... Make sure you ask them the good question, sometime the techi guys freak out when you say you want to connect a MAC...
what you need is :
GPRS CID String
Username
password
In Ireland it's as follow :
GPRS CID String : *99#
Username vodafone
password vodafone
you could try... if it work, you are in... Make sure you watch the data you transfer, it can get VERY EXPENSIVE... I would suggest Email access only... try avoid downloading file.
Hope it help.
MCBP 2.16 Mac OS X (10.4.7)
MCBP 2.16 Mac OS X (10.4.7)

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

Hello. I can say that you have a quite strange „huge question”… It’s non-sense to stay connected with your car which is hundreds miles away. Unless…
I have a theory. You don’t want to controll your car, you want to controll somebody who is driving the car. Volvo XC 60 is a nice family car, usually used by married men between age of 35-45, probably with small children, so it’s very unlikely that you want to controll your teanage kid, mainly because probably even if you would give him/her to drive the car in the neighborhoud, I don’t think that he/she would be „several hundred miles away”… If your child is not young teneage anymore, and he/she has his/her own life, but you want to control him/her, that is sick… So I am convinced that you want to controll your husband who probably travelling often! Am I wright?
Isnt’t nice at all! Would you like if you would be monitorized in such way? I bet you don’t!
Anyway, iPhone is smart, you can use for many things, but come on, you really were thinking that there is such kind of application???
What could you do it's to put in the car a GPS survelling system, however I don't think that you could do it without your husband knowledge, otherwise he won't be able to start the engine...

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

WRT 120N- Cannot connect to the internet with more than one PC at a time.

Before I went on a three month vacation,I could connect 3 or 4 PC's either wireless or wired to my router with no problems at all.I have a desk top and a laptop computer which I use at home.After I returned,I found that I could connect to the internet with only one PC at a time.
If I was say,connected via my laptop,my desk top would continuously keep getting disconnected and vice versa.I have been reading the suggestions from experts here and have done a few checks based on them.I also cannot get to my router page which is 192.168.1.1 I keep getting a message that says "Problem Loading Page" and this happens with both,Firefox and Internet Explorer.I am running Windows 7 - 32 bit on my desk top and Vista Home Premium on my laptop.
I have opened the "Command Prompt" dialogue and pinged 192.168.1.1 and thereafter I typed in "ipconfig".These are the results:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Gordon>ipconfig
Windows IP Configuration
PPP adapter Brownwolf:
   Connection-specific DNS Suffix . :
   IPv4 Address. . . . . . . . . . . : 92.98.42.65
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . : 0.0.0.0
Ethernet adapter Local Area Connection* 22:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:35a2:8753:8832:f494
   Site-local IPv6 Address . . . . . : fec0::c:35a2:8753:8832:f494%2
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:35a2:8753:8832:f494
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:a408:59a3:918e:f0ab
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:a408:59a3:918e:f0ab
   Link-local IPv6 Address . . . . . : fe80::35a2:8753:8832:f494%12
   IPv4 Address. . . . . . . . . . . : 192.168.0.1
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:413:cf4f:77af:474d
   Site-local IPv6 Address . . . . . : fec0::c:413:cf4f:77af:474d%1
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:413:cf4f:77af:474d
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:1591:ad9:13da:8fea
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:1591:ad9:13da:8fea
   Link-local IPv6 Address . . . . . : fe80::413:cf4f:77af:474d%11
   IPv4 Address. . . . . . . . . . . : 192.168.1.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : fe80::35a2:8753:8832:f494%11
                                       192.168.1.1
Tunnel adapter Local Area Connection* 7:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 14:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 15:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 19:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 20:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41::5c62:2a41
   Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
Tunnel adapter Local Area Connection* 23:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 24:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 28:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
I presume that this model is a modem **bleep** router as I do not have a separate modem with my system.I have a DSL connection and the firmware version of my router is ver.1.0.If I recall,I did upgrade to the next firmware upgrade a few months after I purchased the router but I am not sure.
I use both my PC's to run a small business venture and I am worried that resetting the router may cause some other problems and will stop me from using the internet.
The Command Prompt information above was taken from my laptop.
Any help will be really appreciated.
Gerard.
Solved!
Go to Solution.

brownwolf66 wrote:
No,I have a desk top and a laptop and I cannot access 192.168.1.1 on either of them.In my OP,I have used the Command Prompt dialogue on both computers to ping 192.168.1.1 and I have attached the results.This is what I got:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
The results I obtained using ipconfig in the command prompt have already been mentioned in my OP.
I do not know if the above result is what it is supposed to be but I still cannot access my router's home page.How do I verify if there is a proxy server and if there is one,how do I disable it in my browsers?This problem occured suddenly as a few months earlier all was well.It's getting rather frustrating.
I suggest resetting the router. Make sure firmware is updated. You can download it here - http://homesupport.cisco.com/en-us/support/routers/WRT120N. After firmware upgrade, reset and reconfigure. Just access the link below to guide you setting up the router.
* Setting up a Linksys router for DSL Internet connection
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
* Setting up a Linksys router with Cable Internet service
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

Hp pavilion ms235 how do I connect to a tv with a HDMI input?

how do I connect to a TV with a HDMI input? Can I use a USB graphics adapter?

Here are the specs for your HP Pavilion All-In-One MS235 Desktop Computer. Based on the specs, your computer doesn't appear to have a video output of any kind. A USB-to-video adapter such as the EVGA UV Plus+ UV39 will be required to connect your HDTV to your computer.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How do I connect to Amazon prime with my Apple TV?

How do I connect to Amazon prime with my Apple TV?

There is no Amazon Prime app.
It is possible with an iOS device and the latest version of the Amazon Instant Video app to share the content to the ATV via AirPlay.

How do i connect my apple ID with itunes?

I keep on trying to sign into itunes with my apple id, but it never works . How do I connect my apple ID with itunes?

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.
You may find that when you try to do this, the password for your old ID it isn't accepted. If this happens, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How do i connect to the TV with a thunderbolt?

Similar Messages

Maybe you are looking for