How do I connect wii u to AirPort extreme

I cannot for the life of me connect my Airport Extreme to my son's new Wii U. Anyone with help will be greatly appreciated.
Keep getting the following message in Wii U
Please confirm that your Wi-Fi network is set up and that the SSid has been set correctly.
If the Wi-Fi network is secure using WEP, the security key you entered may be incorrect.
Unplug your wireless router from the power outlet. After a little while, plug it back in and try again.
Make sure the Wii U console is within range of your wireless router.
Move any electronics away from the Wii U console and your wireless router.
Try changing the wireless channel within the settings of your wireless router.
If you are unable to access or change your wireless-router settings please contact the manufacturer for support.

Redo the setup of the AE and use all short names for the wireless.. no spaces and pure alphanumeric.. Apple names are a problem to other devices.
so eg.. AE24ghz for 2.4ghz and AE5ghz for 5ghz wireless.
Also network name fo the unit should also comply.. eg AEGenx (you can use whatever of course.. )
If you still have issues.. test with no wireless security..
The only valid wireless security now is WPA2 AES which Apple calls personal.. use a password of 10-20 characters pure alphanumeric.
Fix wireless channels for at least 2.4ghz if you still have issues.. try 11, 6, 1
5ghz changes have no effect in AC version routers.
There are no other possible changes that can be made.. Apple have removed all other settings and logs so you cannot see what is going on anyway.

Similar Messages

How do i connect my pc to airport extreme?

i already have a mac os x and a mac notebook hooked up to airport extreme and i was wondering what i need to hook my pc up to it. its a dell pentium 4. i don't know too much about computers so i need to know what i need to get my pc on airport extreme. i would really appreciate it if you could help me. thanks

Hello odea1. Welcome to the Apple Discussions!
i already have a mac os x and a mac notebook hooked up to airport extreme and i was wondering what i need to hook my pc up to it.
Does you Dell have an Ethernet port? If so, the easiest route would be to run an Ethernet cable between the Dell and the AirPort Extreme Base Station (AEBS).

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. C

I am getting a "connection timeout" message when trying to access my Airport Extreme with various laptops, Play Station 3 and Wii. My Airport Extreme is about a month old; it was working fine until about a week ago. Suddenly, the "timeout" is not allowing me to connect to my wireless network.

It could be that there's a new source of interference.
Use the advice in the second message of this thread to investigate the signal and noise levels that each client sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1
By the way, you've been misled by the poor field labeling into trying to type your entire message into the subject field, instead of putting a one-line topic description there.

How to set up Guest Network, while Airport Extreme is connected to Satellite Receiver

How to set up Guest Network, while Airport Extreme is connected to Satellite Receiver?

Depending on how you have your AirPort Extreme configured to work with the satellite receiver, it may or may not be possible to enable the Guest Network function.
We will need to check some settings on your Mac or PC, but in order to do that, we need to know what operating system you are using on your computer.
If you have a Mac, click the Apple icon in the upper left corner of the computer screen, then click About This Mac. Post back with the OS X Version number that you see there.

HT4907 i am trying to set up an airdisk that is connected to my parents airport extreme, though next to my iCloud account details i get a yellow status light and can't get a hold on the airdisk being connected to an other internet connection..what should

i am trying to set up an airdisk that is connected to my parents airport extreme,
though next to my iCloud account details i get a yellow status light and can't get a hold on to the airdisk when i'm being connected to a different internet connection..what should i do?
sharing is enabled and i entered the right account details.
the disk shows up connected to my parents network, but i want to access it from my place as well

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

How can I open ports on my AirPort Extreme, from WINDOWS?

I have an Airport Extreme as my router, and I have a Windows-based computer. I need to open ports on the router (ironically, it is for my Apple TV).
However, even though I can use the Airport Utility for Windows (latest version 5.5.3), I cannot open ports from the application.
Everywhere I look, I am supposed to have a firewall tab in the Advanced section, but I do not have it. The only tabs that I have in Advanced are:
Logging and Statistics
MobileMe
IPv6
How can I open ports on my Airport Extreme router from Windows?

Is your AirPort Extreme the only router in your network configuration?

Can't connect wireless device to airport extreme

I bought airport extreme router second hand and am connecting it to HP desktop windows 8. All software is installed properly and router is connected. I have a solid green light, and internet access on desktop, but cannot connect wireless devices to network (kindle, cell phone, etc.) All wireless devices show excellent network signal strength, allow me to put the password in, but all show connected and have not internet access.

This appears to be a simple modem, so assuming that you reset the modem completely before you connected it to the AirPort Extreme, the next step would be to check to insure that the AirPort is in router mode and not bridge mode.
Open up AirPort Utility, click on the AirPort Extreme, and then click Manual Setup
Click the Internet icon at the top of the window
Click the Internet Connection tab just below that
Make sure that the setting for Connection Sharing is set to Share a public IP address
Click Update to save any changes, and give the AirPort a full minute to restart
Check the network again to see if devices can connect now.

Why does 2 Airport Expresses connects to one another instead of connecting to the primary Airport Extreme For internet Connectivity ?

I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?

Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express.

How to setup guest net work in airport extreme

Hi,
i have how to setup guest net work in airport extreme?
i have the airport extreme and the airport base station as a range extantion.
all is workig good :-)/
i the init setup (od the extreme) i setup the router to support also guest network with password.
when i scan the network i canor see the guest network.
also i canot set it up from the air play (win7 sp1)
THX :-)

Mmm, generally you don't need to do much port mapping in an extreme. Not sure I understand you. What does the d-link do?

Is it posable to connect 2 ISPs to Airport Extreme?

Is it posable to connect 2 ISPs to Airport Extreme for Redundancy and load balancing? If not with Airport Extreme woudl it be posable with 2 airport extremes or some other hardware. I know there are Cisco rauthers taht suport dual WAN but trying to stay with apple products for easier integrations as our office is primerely mac oriented.

You will need a dual WAN router to be able to do what you want. Cisco would be a good choice for this.
If you use 2 AirPort Extremes, you will have two completely separate connections....and no way to balance the load between them.

Unable to connect Brother printer to Airport Extreme using USB

Hi, I recently bought a Brother HL-2270DW printer, which has 802.11 b/g wireless capabilities. My airport extreme (2008 model) is set to 802.11 n (5 ghz), so I can't set-up the printer wirelessly to the airport extreme without changing to 802.11 b/g. Instead I'm fine hooking up the printer to the airport extreme using a USB. When I first turn on the printer, I can print from my Macbook, but after a few minutes, the printer goes offline and has to be turned off/on. When I try to Open Printer Utility, there is a connection error. I have the right driver installed, and I can print fine for a few minutes after turning on the printer, and all the time when the printer is connected to the Macbook directly using the USB. I would like to use the printer by connecting it to the airport extreme using the USB or Ethernet. Any help would be much appreciated, thanks,

Please explain exactly what you're experiencing that leads you to claim that.
The current firmware of the TiVo Premier is easily confused about whether it's connected to the Internet or not. In my experience, a TiVo unit will quickly regain its senses and decide that it really is connected.

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Sorry, but this article is about 4 years old, and was printed based on preliminary information at the time.
The bottom line here is that Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme.
If it works for you, great.
You might want to review the Apple Support documents below, which are far more recent than the article you reference:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
http://support.apple.com/kb/HT2038
It is supported.....
This is NOT correct. Please do not post false information on the forums.

Can't connect to MacBook with Airport Extreme

I just swapped Airport Extreme base with new Airport Extreme 8012.N and now my Macbook can't connect to internet, keeps cutting out and dropping off. I have an iMac G5 connected via ethernet to Airport Extreme and Macbook in living room. It was working fine with old Airport Extreme router. I also have an Apple Express (not new 8012.N ) but it just blinks orange when plugged in. Any help would be appreciated.

You have to power down everything to start with. Make a clean slate so to speak.
I switched from an older Air Port Express to the new Extreme. Run the new software and when you power back up the new base station should show in the window. Follow the steps. It made me feel stupid the 1st time through and I had to do it again. You have to take your bent paperclip and reset.
After I got the new base station up and running I took the old Express and used it for Airtunes. At first it just blinked and wouldn't show up on the list of devices. I had to do the paperclip thing. And there it was! Green light! Follow the steps for Airtunes. Then I had to reconfigure my settings for my HP 3300 series wireless printer. That wasn't so bad, it all worked.
The machines all work well; we all just need pay close attention to the instructions.
I think that the Apple on line instructions could be a bit more clear. It all worked as it was supposed to but it was certainly a trial and error process.

How to extend the range of my Airport Extreme network by adding an Airport Express

How to extend the range of my Airport Extreme network by adding an Airport Express?

You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
The instructions that I will provide are for using AirPort Utility 6.0, which you have.
Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
Make sure that the wireless is turned on your Mac
Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
Click on the rectangle, and then click on the AirPort Express xxxxxx listing
AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that the Express be configured to "Extend" your wireless network.
Edit the Base Station name to your liking, then click Next in the lower right hand corner
Allow a full minute or two let AirPort Utility do its work
When you see Setup Complete, click Done at the lower right of the window.
Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
You should be in business.

How can I configure my first gen Airport extreme?

does anyone know how I can configure my 1st Gen Airport Extreme with my latest Airport Utility? Or is there another way?

A 1st Generation AirPort Extreme is model number A1143. Please check on the bottom of your device to confirm that you have this model number.
A1143 can be configured using the latest version of AirPort Utility in Mountain Lion OS X (10.8.4).
If you don't see model A1143......you do not have a 1st Generation AirPort Extreme. What model number do you see?

How do I connect wii u to AirPort extreme

Similar Messages

Maybe you are looking for