How do I connecting a NIC to a Router to an ISP

I have just loaded a network interface device driver in SEDE 9/07
I can now ping to one or two ip address. So it seems the network card is working.
As I am a complete beginer, and idiot to boot, how do I connect this device to my Netgear wifiswitch router?Obviously I am only using the switch not the wifi.
My machine has ip 192.168.0.2.
The Netgear has ip 192.168.0.1 and has NAT enabled. It sees my machine attatched and this is included in the setup access list.
It tells me the DNS servers are on
194.68.4.100 and 194.168.8.100.
As my system is a due boot one,I know this setup works in windows.
I have tried to set up the card with a gateway(192.168.0.1) and the two given DNS addresses.
But firefox doesn�t see a thing .
I am not sure if I have set up the NIC correctly. How do I test this?
or better still how would you set this up? Remember I am very stupid.

I'm not fully sure what you've done so far. Have you set up your machine with a static address or DHCP?
If Solaris didn't detect the network card when it was first installed (because no driver), then it didn't go through the network setup stuff. If you would like to redo that rather than setting everything up manually, run 'sys-unconfig'. It will reboot the machine and then ask for network setup stuff as you reboot.
If you're doing DHCP, it should already have configured a gateway (what do you see in the output of 'netstat -nr'?
Did it create entries in /etc/resolv.conf? If so, you may need to verify that you have a 'dns' entry in the 'hosts' line for /etc/nsswitch.conf.
Darren

Similar Messages

  • How do I connect my ipad to netgear router wnr 1000v3?

    How do I connect my ipad to netgear router WNR1000v3?

    How do I connect my ipad to netgear router WNR1000v3?

  • HP Laserjet 100 Color mfp M175nw: How do I connect it to secure network router?

    How do you set up the printer to connect to the network through a password protected router? Where would you input the passcode?
    This question was solved.
    View Solution.

    On page 43 of the Software Technical Reference, it shows how to set up the wireless through the Embedded Web Server.
    This link also have other reference documents (User guide, Software Technical Reference, Quick Reference Guide, and Installation Guide) that might be of help in the future.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • How do I connect into my mac using Apple Remote Desktop

    I have version 2 of this but am not that network-savvy. How can I connect to my G5 at work, from home, and vice versa?

    If a user is an administrator on the computer they can do almost any thing they want.
    You could install Apple Server Admin Tools onto your computer. One of the applications included in the tool set is Workgroup Manager. Work group manager can be used to create/modify MCX. Ether on the local computer or remotely on an MCX compatbale directory server. (such as open directoy) MCX can be used to force a specific setting for many plist controled features.
    You can use it to force a setting like time till screen saver starts. Require password when waking from sleep/screen saver. Force login window isntead of auot-login on reboot/startup.
    The nice thing about using a server, such as an open directory, is that it's very easy to push out MCX policy updates. Of corse you would have to update your computers to the directory server. 
    If you don't have a directory server, and don't want a directory server. Then you can use work group manager to modifies the local policy of a comptuer. you can then use a unix commands to extract the actually MCX settings. You could then use ARD Send Unix command to apply the MCX settings to one or more remote computer.
    ether way, an admin on the computer could still remove the MCX. But the user would have to figure out where setting is coming from. and then figure out how to remove the setting.

  • How do I connect my drive to iMac for best transfer speeds using an adapter

    Hi,
    My question is: which port on my "old" LaCie hard drive should I use to connect to my iMac for optimum speed transfer? Should I use an adapter?
    I am a pro music producer/songwriter & sound designer. I use large audio files in my AVID DAW Pro Tools 11 application both to read and write constantly.
    For this I have dedicated hard drives such as a 6TB Promise Peagasus with Thunderbolt 1. But it's starting to run a little slow due to all the information residing only on this 1 unit.
    I want to spread out my audio files on other hard drives as well. The one I MAYBE want to use, is a LaCie hard drive I have had for a couple of years.
    Important: I only have 1 Thunderbolt port left to use on my iMac and 1 Ethernet port.
    So do I need an adapter and what would be the speed then?
    My question is how do I connect it for optimum speed transfer?
    It is a LaCie D2 Quadra V2 E hard disk with 32mb cache.
    It has:
    1 FW 400,
    2 FW 800,
    1 High-Speed USB 2.0,
    1 eSATA 3Gb/s.
    I have an iMac 27" Mid 2011, 3.4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 running OS X 10.9.4.
    I look forward to your replies.
    Kind regards,
    Michael

    Thanks. Yes it is nice. Sounds interesting with your G force. I think I did put the Raid to 5, but cannot really remember. All I know is that when I did use Raid 5, I agreed to use 1 of the 6TB for some backup or security stuff that it takes care of on it's own. I thought it sounded good and safe when I installed it.
    Am unsure how to check it.
    I just read about the Raid block size which can be set to higher than my 32k in the Disk Doctor app to work faster with large amounts of continues data transfers. But it means that I should perform a new Raid. Not happy at all about this as I am very careful about my audio files.
    Yes, I'll definitely go for the Thunderbolt/FireWire adaptor!

  • How do you connect a microphone to a Mac?

    How do you connect a microphone to the Mac?  I'm trying to record vocals onto Garage Band.  I tried to use an adapter (XLR to MONO 3.5 mm) to connect directly to the port on the side of the MacBook Pro.

    I prefer USB mics - a really cool and nice one that I used to have was the Blue Snowball, available at Amazon for a great price. It got lost in a move but I intend on getting another.
    Clinton

  • How do I connect my i-pod to my car cd player

    I would like to listen to my i--pod in my car. How can I connect it to my car cd player?

    If your car CD player, doesn't have Aux input cables, either a 30 pin Dock connector or 3.5mm stereo jack, but have FM radio, you can get an iPod FM transmitter to transmit the iPod music to the car Radio.
    Google or search Amazon or eBay for iPod FM transmitter, should cost less than US$30.
    Have a nice day!

  • How to check no. of NIC cards which are available in Solaris 9 server.

    How to check no. of NIC cards which are available in Solaris 9 server.
    Regards,
    Dinesh.

    Hi
    For list network cards that was sometime registered in system:
    grep network /etc/path_to_inst | awk ' { print substr($3,2,length($3) -2 ) $2 } '
    ifconfig -a show all network interfaces that curently configured
    For check that interface that was listen at first comand available or not: Try
    ifconfg <interface_name> plumb
    ifconfg <interface_name> unplumb
    Do not touch already configured interface or lost network connection.
    Regards.

  • When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

    When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

    Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
    Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
    Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
    The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
    Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
    They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

  • How do I connect a HP OfficeJet 100 Mobile Printer to my iPad 2?  It works fine with other devices in my home, just my iPad says no AirPrint device found and Bluetooth is on on printer

    How do I connect a HP OfficeJet 100 Mobile Printer to my iPad 2?  It works fine with other devices in my home, just my iPad says no AirPrint device found and Bluetooth is on on printer

    Hi @kobgold319,
    Welcome to the HP Forums!
    I see that you are trying to connect your HP Officejet 100 Mobile Printer - L411a to your Iphone 5. I am happy to look into this for you!
    Please take a look through this guide, HP Printer Does Not Support HP's Mobile Printing Solutions. As it will have the answers to your questions.
    Hope this guide helps, and have a nice day!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How many concurrent connections can ACS handle at once?

    Hi Experts,
    Could you please let me know how many concurrent connections ACS can handle at once?
    Is there any limitation on it?
    Our ACS version is 4.0 (1) build 27.
    Thanks in advance for your help and have a nice day!
    Regards,
    Gabor

    It depends on many other factors but as far as I know ACS can handle upto 40 Auth request per second*
    *Condition Apply
    Regards,
    ~JG
    Do rate helpful posts

  • How do you connect parts of a split clip?

    How do you connect parts of a split clip?  I unlinked audio from video, split the ambient audio and removed some unwanted background noise.  I now need to connect the two parts of the audio and stretch to match the length of the video portion. I don’t want to stretch just one part of the audio; I need to stretch the entire audio clip so that it is uniform.  I am using APE12.

    Thanks for such a quick reply.  I was shooting footage for a soothing background: gently rolling waves washing on the shore, with the sound of the water.  In the middle of the clip, some voices were audible.  Everything was timed, so it wasn't practical to just cut out the middle of the video.  (In addition, this would leave a visual hiccup due to the motion of the sea.) 
    So it seemed like the best and easiest thing was to cut out only the bad audio (only a few seconds) and then extend the duration of the remaining audio track to match that of the video track.  This was easy using Time Stretch, however this method only extended the portion of the audio track prior to the cut, leaving one portion at original speed and the other at 96%.  In other words, the audio track is the same length as the video track, but there are two slightly disparate parts to the audio track--one a bit slower than the other.
    Now in this particular case it's not terribly important, since the sound of waves is pretty amorphous, and a slight difference between the two parts (96% vs. 100% of original speed) is not going to be noticed.  But I would prefer to have a method that would work when such things do matter.
    What would be really nice would be the ability to
    1. Remove the corrupted audio
    2. Fuse/join/recombine the two audio portions
    3. Stretch the entire new audio track to match the length of the original video track.
    Message was edited by: Kawika808 today is typo day!

  • How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

    How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
    This does not have an HDMI port but does have:-
    1) S-Video I/P,
    2) Video I/P,
    3) Audio Input (Left & Right)
    4) Audio In jack (for VGA and DVI source)
    5) DVI input
    6) VGA input

    Welcome to the Apple community.
    The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
    You may well wish to make sure that the DVI connection works before spending any money on a DAC..

  • How do I connect both a Mac and PC to Apple TV Home Sharing?

    Goal
    - I am trying to share both my PC and Mac through my Apple TV2 on the "Computers" home sharing menu.
    - These are 2 seperate iTunes accounts as they are 2 different owners of the PC and Macbook.
    - However, home sharing only allows me to have one at a time, can I not have 2 computers connected?
      (The menu is in fact plural and says "Computers" not "Computer")
    Attempt
    -I turn on home sharing on my PC with my PC iTunes account, it then shows up on the "Computers" list as PC
    -I turn on home sharing on my Mac with my Mac iTunes account, it then shows up on the "Computers" list as Mac, but it deletes the PC share
    Troubleshoot
    -So I started from scatch and connected the PC share with my PC itunes account, it shows up,
    -Then I connect the Mac home sharing with the same iTunes login as my PC, but it also erases my PC from the "Computers" list and just displays the Mac.
    Question
    -How do I connect both a Mac and PC to Apple TV Home Sharing?
    -I want them both to show up in the "Computers" list.
    -So the final result will look like this on my Apple TV menu:
    Computers
    -PC
    -Mac
    whew... I'm out of breath... I hope there is an Apple Genius out there that can help.
    Thanks!

    After retrying the home share with the SAME ITUNES ACCOUNT ON HOME SHARING I finally got it to work.

  • How do I connect an existing Behance account to a new Adobe ID account ?

    Hello,
    I am an existing Behance account holder.
    I recently started a new job, where they give me access to a personal Macbook & Adobe cc account.
    I want to link my existing Behance profile to my new Adobe CC account.
    Is this even possible - If so how to I connect them ?
    It would not be beneficial to create a new Behance profile.
    Thanks,

    Hello - absolutely! You just need to make sure that your Behance account is linked with that Adobe ID. Please login to your Behance account, then visit this link and choose "use a different Adobe ID" and enter your new Adobe ID with the CC account. From then on, you'll use that email address to login to Behance:Behance

Maybe you are looking for