How do I continue installation?
While I was installing a trial version of Adobe Premiere Elements, the process "froze" and would not install. I therefore cancelled the installation --to hopefully restart it again, but I could not.
Any solution? See below. Thank you.
Uniquescreennamegrrrrrr do you receive a specific error message asking you to restart? By default the installation files will be saved to your downloads folder.
Similar Messages
-
How can I continue installation of acrobat professional 7
I had to reset my system to an earlier date (unrelated problem) and lost my full installation of Acrobat Professional 7.1 during this process. After downloading the file 22020134.exe from Adobe the attempt to install the file, was interrupted at the following location (CaptureA):with the following error messages (Capture1 + 2)
At this point I could not continue and have no clue how to continue the installation. I would appreciate to learn about a solution to my problem.
Thank you!This error indicates that there is insufficient write permission on the mentioned location. You can try providing permission to this folder and hit retry.
Also, these screenshots seem taken on a Windows 7 machine. If that's the case, I would like to inform you that Acrobat7 is an old software and is not compatible with Windows 7. Please make sure you meet the system requirements and do not run into another problem after installing it.
http://www.adobe.com/products/acrobatpro/tech-specs.html
Please feel free to post back if you need more information. -
I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5.
I did the usb drive with the compatibility software-once installation start from the dvd, it ask me for some disk, usb or dvd drivers to continue.
How I can continue the instalation? How I can provide those driver to the instalation process?
Thanks
ManuelYou can't get there with GUID/GPT.
There are tips on making a USB flash device that is bootable.
You can set aside a small 6GB partition somewhere and put Windows 7 installer there and run it WHILE IN Windows.
Windows Vista can be upgraded in place to 7 RC.
You'll need NTFS (30-50GB).
Windows doesn't support FW for booting.
You can create a drive that has Master Boot Record. -
How do I get rid of this on my screen? "In order to continue installation, please close the following application: iPhoto"
Just popped up...grrtried that too. I rebooted and it was gone, mmh, but anyway glad it's gone
-
How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation of the new version because of the existance of files from the previous version.plz help
What "app cleaner software" ? I ask because installing Photoshop over a previous version has never been a problem. Perhaps your difficulty stems from another source, eg. "cleaner software" ?
If you look in your hard drive, at the root level there is a Library. In there is a folder called Application Support, and in that you will find a folder called Adobe. Files from your previous version are there.
However, I urge you to call Adobe support to make sure you are not doing anything that would mess up other Adobe applications.
http://www.adobe.com/support/connect/connecthostedsupport.html -
I get a message "In order to continue installation, please close the following application. I closed the application, but the message does not close and the installation is "frozen" ... how do I reset?
Try posting in the Mountain Lion forum. Here is the link below. This forum is for old software circa 2003.
https://discussions.apple.com/community/mac_os/os_x_mountain_lion -
When I update my Mac, I get an Installation alert that in order to continue installation, i need to close iTunes. How do I stop the installation and how do I close iTunes?
That sounds like the latest iTunes Version 11.1.5 update.
To continue the installation you must first Quit iTunes.
To Quit iTunes, use
or -
I have a Macbook Air mid 2013, about 2 weeks old. I ran BCA to the point that it restarted my Macbook Air but did not then initiate the Windows installer. How do I continue the installation? The instructions and tutorials I have found assume that the installer will start automatically after the reboot.
BCA also gives the option to uninstall windows from the BCA screen when I launched it. I would appreciate any help. ThanksTry the offline installer from http://get.adobe.com/reader/enterprise/
-
Please insert adobe after effects cs4 into drive G:\ to continue installation
Why show message that "please insert adobe after effects cs4 into drive G:\ to continue installation" while installing Adobe After effects cs4? How to do it? My computer OS is windows 7 (32bit). Who can help me?
There's not much to go on here but it sounds like you are installing from a set of disks and you need to insert the next one.
If that is not the case please give us some systme info so we can help. -
i bourgt 10.7 Lion, but i cnt´t install it. All the last updates are downloaded. I see the sign of the lion, but not clear- there stand the download stopped. How can i continue the download?
In that case, drag the Lion installer from your application folder to the trash. Empty trash. Now press option key and click on 'purchased' tab. The button next to the Lion installer now should say 'install' click on that to download again.
-
How to build an installer including the vision Acquisition Software
hi all, my question is "how to build an installer including the Vision Acquisition Software".
is it enough to select "2010 Run-Time Engine" "Vision Run-Time Engine" and "NI-IMAQdx"? Its ok with the "2010 Run-Time Engine" but there is some problem with the other two.
can some one help thanks a lot!hi again, i have some problem with install Vision Run-Time Engine
must i install RTE with the Serial Number, or i can chose the "install this product for evaluation" to continue the installing, maybe active it later. But after i chosed "install this product for evaluation" and finish the installing, i still cant find RTE from my disk.
i cant even chose my path to install the RTE. Can u plz tell me what is wrong with that? -
I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark -
Hi! ... When configuring my new iPad, it says the UserId is already in use and I cannot progress any more. Of course it's in use, it's my UserId. How do I continue ?? ... Thanks in advance
Did you select "Sign In with an Apple ID" as opposed to "Create a free Apple ID" when setting it up?
-
Hey, I'm trying to install Adobe Flash on my Macbook Air. At a certain point it asks for my password but it doesn't take it. So I cannot continue installment. I have reset my password already. Still the same problem. How can I continue to install when it keeps asking for a password it doesn't recognize over and over again? How many times do I have to reset it then? Advice please
You have to provide your computer's administrator password in order to install Flash Player.
-
Does anyone know, how to fix ' This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." ?
At what point in the process are you getting this message? Have you tried downloading a fresh copy of the iTunes setup file from http://www.apple.com/itunes/download/ ?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
Exist a Jtree node.id or something like this ?
I would want to retrieve a node using a unique 'id', for example the absolute index (into the total nodes count) Is there something like this ? Can I add a particular property to a node ? ( for example this 'id' if it does not exist ) Another questio
-
Multiple Oracle Clients on Same Machine for different apps
I was not able to find info that answered this so sorry if I missed something that explains this. At our site we have many applications some I know lots about some I'm not even aware of because we have mulitple sites. The application I develop uses a
-
Hello Gurus, I have configured ChaRM in SAP Solution Manager 7.0 EHP1, all entries in SMSY are also correct. Now when I create a new change request, it asks for requester, approver and various other fields including IBASE/Component. I see the only en
-
Problem with exception aggregation
Hi forums, Can any one help in this issue? We checked the data in the ECOM cube for the order 63349312 where it is giving 6 records eventhough we are deleting the adjacent duplicates of the order number in the start routine. (Is it like the deletio
-
Exporting out of Logic to Pro Tools
What's the best way of exporting only vocal tracks out of Logic express 7? I need to have each track as separate .wav or .aiff files and be able to import them into Pro Tools 6.4 for a mix so they're all in time as they were recorded in Logic. I myse