How do I control the Facebook preview image?

Help!
How do I control the preview image that appears when link is shared on Facebook?
Tried adding code snippet under the <head>, on html view of the page in Business Catalyst... with no luck.

We have a pre-built Facebook Previews Widget over at MuseThemes.com that achieves this. Simply drag the widget out onto your page, and enter in your page description, title, category and link up an image. There's a complete training video included so you don't get stuck
Check out the widget here
Hope this helps! Cheers.
Steve Harris
MuseThemes.com

Similar Messages

  • How do i change the file preview image for mp4 files?  I replaced the image but it doesnt show in my dock, instead it shows the first still of a movie

    http://imageshack.us/photo/my-images/21/screenshot07m.jpg/
    http://imageshack.us/photo/my-images/39/screenshot04s.jpg/
    pls help. i change the file preview of a movie file, and it shows that i have changed the preview in finder but when i open the folder on my dock, it shows the still of the movie instead.
    the image shows the film the hangover as an example. the movie poster is visible in finder, but reverts to a default movie still from the dock. this only seems to occur for mp4 files.

    its nothing to do with itunes, its movies form the internet. i got the file preview by taking an image off the internet, pressing command c and pasting it on top of the small icon in the get info section

  • How can I access the thumbnail/preview image of a PSD file?

    Hey guys I'm trying to salvage some work from a corrupted PSD file via the thumbnail. What happened was I saved my work and closed photoshop and hit the reset button on my PC afterwards by mistake (i dont see why this caused a problem because the program was fully closed at the time). When I open the file now it says it uses an unsupported blending mode, if i press ok I get an error saying incompatible PS version, if I press flatten it says unexpected end of file was encountered. Ive tried PSD repair tools and searched the net for solutions and there doesnt seem to be any - Ive pretty much given up on trying to repair the original file.
    The thing is, the thumbnail of the file seems to be intact because I can still see it as the file icon. I wanted to know if there was any way i can access this thumbnail image so i can enlarge it. Any help would be very appreciated!!

    I have an idea to try...  Earlier I mentioned the Windows Picture Viewer...  Normally that won't read PSD files, but I'm used to using that to look into PSD files because at one point I bought the FastPictureViewer Codec Pack.
    Something to try, and it won't cost anything:
    1.  Try downloading and installing the FastPictureViewer Codec Pack from here:  http://www.fastpictureviewer.com/codecs/
    2.  Once it's installed you get a free trial period, so you can try opening your PSD file by right-clicking on it and choosing Preview.
    If that fails, here's another thing to try:
    Open the Bridge component of Photoshop and navigate to the folder in which you have the file.  It may be able to make a larger thumbnail than the one you're seeing.
    Other than that, are you saying you're seeing the thumbnail in Windows Explorer?  If that's the case, what happens if you right-click in the white space near the file and choose View - Extra Large Icons?
    -Noel

  • How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

    How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

    Any image can only be as large as the Original. With a program like Photoshop you can UpRes an image and get it to a bigger size, larger files size as well, but the actual quality of the image will be degraded, depending on the UpRes system and the original quality of the image.
    iPhoto is not the program to be doing that in and I don't think it even has that option.
    So I suspect the image you are trying to send isn't much bigger than what you are getting. You can also try Exporting it from iPhoto to yopur desktop and see what size you end up with. If it is still that 209KB +/- file size then that is the size of the original image.

  • How to control the visibility of image items on a layer?

    I want to control the visibility of image items on the layer. Some items will be visible and others will be hidden on the same layer.
    Can anyone tell me how can I achieve this using SDK APIs.

    Hi,
    You can try following facade function. And set the Opacity value to 0 for hidden the images or set greater then 0 value for visiablity of image.
    IXPAttributeFacade::SetOpacity (const UIDList &itemList, PMReal opacity);
    I hope it will resolve your problem.
    Regards,
    Jitendra Kumar

  • How do I control the order of all day events in iCal?

    How do I control the order of all day events in iCal?  Even if I painstakingly try to
    re-order the events the way I want them, when they print, they are in a different order.
    I have searched other forums and no one seems to have an answer to this.  Has
    anyone found the solution?  Thanks!

    I also have this issue, where the events in iCal change when viewing in print preview or printing. I even notice they will switch if I try to print again??!!! I am using different calendars to show different colours. and they are setup on iCloud not on my mac.
    it is becomign frustrating when I print 2 months worth and ssome events are correct in order and alas some will change when I print again!
    Can anyone help please?
    thanks

  • How can i control the timings of my slideshow using iphoto on my ipad

    Q: 1 how can i control the timings of my pupil's slideshows using iPhoto on the iPad?
    Q: 2 then how can i export them?
    Q: 3 how can i combine them from 8 individual slideshows to 1 for showing to their parents at an assembly?
    many thanks in anticipation of your collective help
    brian

    Here's my take on the same thing:
    Short answer: the dpi is set when you decide what size you're printing at.
    Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
    Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
    So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
    For more see http://www.rideau-info.com/photos/mythdpi.html
    Regards
    TD

  • All tracks have the same preview image after import

    Hi,
    when importing some videos (h.264) into iMovie'08, all have the same preview image. I would expect them to hava an image from the clip.
    How to fix this?
    Arne

    The files are on disk in my pictures folder. I took them with my Sony camera as mpeg2 and converted them with MPEG Streamclip to mpeg4 (h.264).
    Just updated to iMovie 7.1, but did not change anything.
    The icons are all of the 1st clip. Moving the mouse over them always show the 1st clip and the audio of the first clip in the thumbnail, but in the preview I see the correct clip.

  • How can I control the zoom on my mac mouse?

    How can I control the zoom function on my mouse? In the middle of working on things my hand will rub the mouse by accident and all of a sudden the context within the screen is large. I have no idea of how to work this feature on my mouse and most times to get it to return to normal, I have to escape out of the work I am performing.

    If you are pressing the "Control" button on the Mac keyboard, scrolling up will zoom in and scrolling down will zoom out. You can disable this if it annoys you through System Preferences > Universal Access. If you are using Mountain Lion, it would be System Preferences > Accessibility.
    Uncheck the in the "Seeing" or "Zoom" section that says "Use scroll gesture with modifier keys to zoom".  It may be slightly different if you have an older OS X version. I have Mountain Lion and am going off of memory on the older versions.

  • I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

    I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

    In landscape mode, the mailbox list is automatically displayed (in portrait mode, you will need to tap the button to,show it).
    To edit the list, tap edit as shown below.

  • How can I control the window size of my output?

    Hi,
    I'm drawing a blank... How do I control the size of the window that my project is viewed in? Right now, it's the entire browser window.
    Thanks,
    Janice

    Hi,
    From your post, I assume you are creating WebHelp output.
    You  need to create a window for the help in the Project Set-up pod. Then,  you need to make sure you call the output so that the window is used.  See http://www.grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm.  This article on Peter's site give you an overview over the  possibilities of calling context sensitivive webhelp and also tells you  how to specify the needed window. Also, the installation directory of  RoboHelp 8 contains a directory called CSH API. In there are example  API's your developer can use to call the help.
    Greet,
    Willam

  • How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

    How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

    There is not now, nor has there ever been a version of flash for any iOS device.
    Adobe has abandoned mobile flash, so there never will be.
    Browsers like iswifter or photon may work for you, but don't hold your breath.
    Check app store for an app of whatever game you want.

  • How can I control the size of a cell in the GridBagLayout?

    Hi,Swing Gurus
    I am developing a swing-based program using JBulider5 enterprise.
    It seems to me that the GridBagLayout is really a hard nut!
    How can I control the size of a cell in the GridBagLayout?
    It seems that I cann't control the size of a cell directly.
    But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
    Thx in advance!
    Regards,
    Justine

    hi,i have not done what you are asking but there are fields like
    COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

  • How can i change the title and image of  published exe

    Hi ,
    I have published a fla file in exe format .
    how can i change the title and image of this exe? do I ve to
    use some of the available softwares in the market? cant i do the
    customised setting in the flash player itself?

    On Fri, 4 Apr 2008 06:21:15 +0000 (UTC), "mFlexDev"
    <[email protected]> wrote:
    > I have published a fla file in exe format .
    > how can i change the title and image of this exe?
    I beleave the easiest way is to use PEResourceExplorer,
    Resource
    Hacker or similar software to modify EXE resources, such as
    window
    title and window icon.

  • I have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?

    i have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?
    i had the facebook app but i could never upgrade it and i was ok with using the outdated version but when i reset the ipod so i could gift it to a friend it obviously got rid of the app and now i cant downloaded because it says its not compatable, how can i download the version i had before i reset it?

    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
    Also see:
    Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

Maybe you are looking for