How do I control the sample you view from a published iBook?

Sorry if this is in the wrong section but couldn't find a section on iBook publishing.
I now have 17 children's illustrated books on the iBook library and they all look great on an iPad. The problem is the sample a potential viewer can download; it is just 2 pages. You get the cover and then the page showing the purchase link. I am getting quite a few sales now but imagine how many I am losing if you can't see a sample of the book.
I contacted Lulu who publish them but they seem oblivious to a fix. They keep referring me back the the preview on their site but that is what you see on the web. I made an epub file with a few of the pages from the book and upoaded it but still, i get just the cover in the sample.
This is really frustrating and no one seems to know how to fix it. Certainly seems to be nothing I can do at my end.
Any ideas?
Thanks in advance for any and all assistance.

Sorry I do not have an answer, but I would like to see your books. What is the title. Splinters69 yields no search on iBooks. I would love to learn more on how you published and if lulu was worth it

Similar Messages

How do I control the sampling rate of a PCI-6602 counter

Labview version: 7.1
Processor: Pentium 4 1.8 GHz
Hello All,
I have two avalanche photo diodes connected to two counter entrances on a 6602 (ctr 0 and ctr 1).
As can be seen in the attached VI, I'm generating a signal on ctr2 and using that as an external clock for the counters.
My objective is to accurately read the counter values at a rate of ~100KHz (i.e. 0.01 ms between measurements) and to be able to control the rate via the front panel. This should be possible (80MHz timebase), however when I run the program it is only able to actually sample at ~5 ms intervals. Also I'm encountering error 200141 even though I set the rate in the counter to 1M, which should buffer enough.
What am I doing wrong? Any help would be greatly appreciated.
Thanks a lot,
Attachments:
FRET_ver_14.vi ‏456 KB

Hello Aadam,
After looking at your code, I would not use the DAQ assistants to implement this. The DAQ assistant are best to be used for simple acquistion and since you are looking to use more lower level properties of you card, I would suggest to move to use the lower level VIs. It will be easier to understand where the problem is occurring at and will run better than using the DAQ assistant.
I have done some initial research for you to implement this design. I have described each of them below and how they will assist you.
The first example I have found is the Change Counter Output Frequency While the Task is Running. In this example, it will show you how to change the frequency and duty cycle of a counter output frequency task. One thing to remember about these counters are that the frequency will not change until the period has finished. For example, if you changed the frequency in the middle of a period of frequency of 1 Hz, it has to complete the 1Hz period before changing it to the next frequency.
The next example I would investgate is in the NI Example Finder called Correlated Dig Write With Counter.vi. The NI Example Finder can be found in Help » Find Examples... This VI will explain how to use the counter as a clock for another task. You will need to combine the concepts of the first example with this to make sure that you can vary the sample clock.
Finally, in the NI Example Finder, there is an example how to count digital events with an external clock called Count Digital Events-Buffered-Continuous-Ext Clk.vi. With this example, I first suggest to add the counter task and make sure you can get the external clock to work. After this, I would then implement changing clock.
Jim St
National Instruments
RF Product Support Engineer

Can't figure out how to set my midi controler to control the sampler!

I have a Korg Kontrol49 and I want to be able to control the sampler knobs and faders with the ones on my Korg. I have it connected threw USB. It works for the keys but I can not figure out how to program the rest of it. Any help would be great. I tried reading everything I could to get it to work but I cant. Please help!
Thanks
Mac Pro Mac OS X (10.4.8)

Press Command-L. Touch the onscreen control. Twiddle your MIDI knob. Assignment learnt.
Then go read the manual on Controller Assignments...

How can I control the window size of my output?

Hi,
I'm drawing a blank... How do I control the size of the window that my project is viewed in? Right now, it's the entire browser window.
Thanks,
Janice

Hi,
From your post, I assume you are creating WebHelp output.
You need to create a window for the help in the Project Set-up pod. Then, you need to make sure you call the output so that the window is used. See http://www.grainge.org/pages/authoring/calling_webhelp/calling_webhelp.htm. This article on Peter's site give you an overview over the possibilities of calling context sensitivive webhelp and also tells you how to specify the needed window. Also, the installation directory of RoboHelp 8 contains a directory called CSH API. In there are example API's your developer can use to call the help.
Greet,
Willam

How do I control the Facebook preview image?

Help!
How do I control the preview image that appears when link is shared on Facebook?
Tried adding code snippet under the <head>, on html view of the page in Business Catalyst... with no luck.

We have a pre-built Facebook Previews Widget over at MuseThemes.com that achieves this. Simply drag the widget out onto your page, and enter in your page description, title, category and link up an image. There's a complete training video included so you don't get stuck
Check out the widget here
Hope this helps! Cheers.
Steve Harris
MuseThemes.com

How can I control the zoom on my mac mouse?

How can I control the zoom function on my mouse? In the middle of working on things my hand will rub the mouse by accident and all of a sudden the context within the screen is large. I have no idea of how to work this feature on my mouse and most times to get it to return to normal, I have to escape out of the work I am performing.

If you are pressing the "Control" button on the Mac keyboard, scrolling up will zoom in and scrolling down will zoom out. You can disable this if it annoys you through System Preferences > Universal Access. If you are using Mountain Lion, it would be System Preferences > Accessibility.
Uncheck the in the "Seeing" or "Zoom" section that says "Use scroll gesture with modifier keys to zoom". It may be slightly different if you have an older OS X version. I have Mountain Lion and am going off of memory on the older versions.

I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

I have multiple email accounts on my iPad. How do I control the order in which the accounts are displayed?

In landscape mode, the mailbox list is automatically displayed (in portrait mode, you will need to tap the button to,show it).
To edit the list, tap edit as shown below.

How do I control the order of all day events in iCal?

How do I control the order of all day events in iCal? Even if I painstakingly try to
re-order the events the way I want them, when they print, they are in a different order.
I have searched other forums and no one seems to have an answer to this. Has
anyone found the solution? Thanks!

I also have this issue, where the events in iCal change when viewing in print preview or printing. I even notice they will switch if I try to print again??!!! I am using different calendars to show different colours. and they are setup on iCloud not on my mac.
it is becomign frustrating when I print 2 months worth and ssome events are correct in order and alas some will change when I print again!
Can anyone help please?
thanks

How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

There is not now, nor has there ever been a version of flash for any iOS device.
Adobe has abandoned mobile flash, so there never will be.
Browsers like iswifter or photon may work for you, but don't hold your breath.
Check app store for an app of whatever game you want.

How can I control the size of a cell in the GridBagLayout?

Hi,Swing Gurus
I am developing a swing-based program using JBulider5 enterprise.
It seems to me that the GridBagLayout is really a hard nut!
How can I control the size of a cell in the GridBagLayout?
It seems that I cann't control the size of a cell directly.
But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
Thx in advance!
Regards,
Justine

hi,i have not done what you are asking but there are fields like
COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

How can I control the order of playback on MuVu Mix (USB 2.

What determines the order of playback of music files stored on the MuVu Mix (USB 2.0)? How can I control the order?
Apparently it is not name order. The music titles are prefixed by sequential numbers. But that is not the order that the files play back.
I tried erasing all contents, then copying the files one by one to the MuVo Mix in the order that I want them to play back (name order). But that is not the order that the files play back.
By the way, in both case, I removed the ".dat" file first. (I also tried keeping the ".dat" file, to no avail.)

SSR wrote:
> on the newer MuVos (which I would have thought included the Mix)
> it's filename order. Other than that it's hard to know, but it sounds
> like you ought to contact Support to check.
I did, and they confirmed (very quickly; kudos!) what you and I both expect: the play order is determined by the alphabetical order of the file names. The mistake was mine. I ass-u-me-d that the MSWin folder "Name ^" order was correct. I did not realize that it is not exactly alphabetical when the file name begins with a number (e.g, the track number). I had renumbered songs from a second CD by simply adding 00 to the track number. Thus, songs and 2 of the first CD are played after songs 08 and 09 of the second CD, as they should alphabetically, even though they appear in the order , 2, 08, 09 in the "Name ^" list. Klunk! Mea cupla!

How can I control the direction of Panel Page menuTabs (menu1) ?

Hi all,
in ADF FACES - JDeveloper 10.1.3
how can I control the direction of Panel Page menuTabs (menu1) either from left to right or right to left ?
regards,

In the adf-faces-config.xml file you can add a right-to-left tag.
(Right click on the structure window and choose insert inside...)

How can i control the timings of my slideshow using iphoto on my ipad

Q: 1 how can i control the timings of my pupil's slideshows using iPhoto on the iPad?
Q: 2 then how can i export them?
Q: 3 how can i combine them from 8 individual slideshows to 1 for showing to their parents at an assembly?
many thanks in anticipation of your collective help
brian

Here's my take on the same thing:
Short answer: the dpi is set when you decide what size you're printing at.
Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

How can I control the size of the af:InputText?

Hi,
How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
Thanks,
Rajesh.

Hi,
It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" partialTriggers="it1">
<af:messages id="m4"/>
<af:form id="f1" partialTriggers="it1">
<af:panelBox text="" id="pb1" background="dark" type="stretch"
titleHalign="start" ramp="highlight"
inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
partialTriggers="it1">
<af:spacer height="15pt" id="s1"/>
<af:inputText id="ot1"
columns="82" rows="25" wrap="hard"
partialTriggers="it1"
value="#{ChatClientBean.chatLog}"
binding="#{ChatClientBean.outputChatTextBox}"
visible="false">
</af:inputText>
<af:spacer height="27pt"/>
<af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
autoSubmit="true" partialTriggers="it1"
binding="#{ChatClientBean.inputChatText}"/>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks,
Rajesh.

How can I control the order of iDVD menu items using the Arrow keys?

I have a submenu screen containing 10 selectable buttons plus the Return Arrow button. I have ordered all the slideshows in the correct order in the DVD map. However, when I run the program, the arrow keys jump the selection focus in an apparently random sequence. How can I control the order of the selection focus?
I'm using iDVD v 7.1.2
TIA.
Ron

Hi
There is one thing You might miss in iDVD - So do I - the ability to re-arrange in the DVD map (block diagram)
The order things will be pplayed or addrssed is same as the order each item is introduced into iDVD.
To my knowledge ther is no way around this.
Yours Bengt W

How do I control the sample you view from a published iBook?

Similar Messages

Maybe you are looking for