How do I control who can print over my wireless Officejet Pro 8000 A809n?

Hi all,
Looking for some help as to how I can control who can/cannot print over my Officejet Pro 8000 A809n (CB047A) printer.
We have multiple users in the house, but I only want to allow certain people to print wirelessly, is there some way I can set this up?
Any help would be much appreciated!

Sorry, you cannot control this other than to remove the printer from the network, turn it off or otherwise disable it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

HP OfficeJet Pro 8000 A809n print driver

I have a MacBook Pro running OS 10.7.5. For an unexplained reason, I lost the capability to print to the subject HP wireless printer. I opened System Preferences and clicked on Print & Scan. I deleted the driver entry corresponding to this printer and requested to add a new printer . It immediately found the A809n printer (my wife running a MBP with Mountain Lion can print to this printer without problem). I get a message stating:
Setting up 'OfficeJet Pro 8000 A809 [2F3790]...'
Software for this printer is available from Apple.
Would you like to download and install it?
with buttons for Cancel and Download & Install.
When I click Download & Install, I get a screen:
Setting up 'OfficeJet Pro 8000 A809 [2F3790]...'
Finding software
It progresses through about 25% of the % accomplished meter, then stalls. Eventually, I get the message:
Setting up 'OfficeJet Pro 8000 A809 [2F3790]...'
The software for this printer is currently unavailable.
Please contact the printer's manufacturer for the latest software.
Of course, when you go to HP to download a driver for this printer, it directs you to use the OS Print & Scan System Preferences which produces the failure mode described above.
Any ideas?
Thanks in advance.
Bob

You might try rebooting you computer first. Then go to the Apple menu and select Software Update... and if HP Printer Drivers v2.14 is listed, select it and update. If it's not listed, you can manually download and install from here. Afterwards, try adding the printer again.
If the problem persists, you might consider resetting the print system.
HTH

How do we control who can approve items in a list?

We are building a referral bonus list that needs to go through 4 levels of approval before being paid out. I've created the workflow, but I can't figure out how to control who is allowed to approve it. For example, it would be bad if an employee
can enter the item, and then approve it as the Manager, Director and VP so that Finance gets notified and puts it on his check.
How can I set it so that only management-level personnel are able to approve/reject specific items within the list?
John

Hi John,
If you are using a custom list as referral bonus list, you can use the PowerShell to enable the option "Create items and edit items that were created by the user" (you
can check if you need to set "Read items that were created by the user" ), then all users could only edit his own created items, then you grant "Manage lists" permission
to Manager,Director and VP on this custom list and they will be able to view and edit all items.
http://www.hersheytech.com/Blog/SharePoint/tabid/197/entryid/28/Default.aspx
If you want only Manager, Director and VP to be able to approve/reject the Approval Workflow task items, you need to grant them Contribute permissions or higher on Workflow Tasks list, and remove all others' Contribute permissions.
http://sharepoint.stackexchange.com/questions/35619/what-type-of-permission-user-needs-in-order-to-approve-workflow-task
Thanks
Daniel Yang
TechNet Community Support

Can't reinstall Officejet Pro 8000 A809N driver on wired network

Computer is running Windows XP with service pack 3 and all updates installed. When I tried to print two days ago, I received an error message that no printer was installed. I had printed earlier in the week without problems. I checked the Printer and Faxes folder in Control Panel, and it was empty. I believe it normally showed the HP printer as well as a Windows Fax print-to-file routine there.
When I clicked on Add a Printer in the Printer folder, I was told that the Print Spooler was not running. I ran "services.msc" from the Run command, and restarted the Print Spooler. I went back to the Printer folder, tried to reinstall the printer, and again it said the Print Spooler was not running. I restarted the Print Spooler again, and tried to look at Server Properties from the Printer folder file tab, and again it said the Print Spooler was not running (it is set to automatic restart). I've checked several related dll and exe files against their backups, and they don't appear to be corrupted. I scanned the hard drive for errors, and none were found.
I tried the built-in diagnostics of the HP software, and all I got was error messages that the Print Spooler was stopped. I came to the HP website, downloaded and installed two additional troubleshooting programs, which did not help. HP Home Network Diagnostic Utility says "software not installed", although nothing had been deleted, and still ran from the Start menu. HP Print Diagnostic Utility 4.1 states there is an issue with the print spooler, and to click "Fix". Clicking Fix opens a window stating to select the printer to troubleshoot, then press "Diagnose". No printer appears in the list though, so it states to install the software.
Therefore, I downloaded both the full and the limited install programs from the website and tried both several times. I ran the uninstall program of the existing installation from the Start menu without problems and rebooted. When I tried to reinstall though, I kept getting errors. Generally, the "hpnwchk" program (HP network check) opens in a dos screen, displays a long string of "Printer : (null)" lines, then crashes. The program then tells me that the printer is already installed to the TCP/IP port, and needs to be removed first. I click the option to "Fix" the TCP/IP port option. The installation program then continues, and brings up a window showing the correct information for my printer (it even wakes it from the standby mode). I select the printer from the list, and the install continues until receiving another error, stating that "arguments are incorrect", and that the installation has failed. I think the "arguments" are setting for the TCP/IP port, which differ between what it is being set from the current drivers and what was previously installed.
I've run the uninstall routine several times, and also manually deleted the printer folder from the registry using REGEDIT (HKCU/Printer). It seems to me that there is a conflict somewhere that keeps stopping the print spooler (it is set to auto restart). Also, the uninstall routine is not completely uninstalling, as it always says that the printer is already installed when I run the installation routines, and displays it's correct parameters. I Googled and read just about everything I can find on the subject, and I'm stumped. Where else could the TCP/IP settings be stored in the Registry, and what else is being missed on the uninstall?
Some additional information on my setup - the printer has been installed for about 2 years with no issues. I can still print without problems from another computer on our home wired network. I opened Vista on this very computer on a separate drive partition, and had no trouble installing and using the printer through Vista, which seems to eliminate any possible hardware issues (I never found it worth the effort to move over to Vista after trying it; only use it now as a back-up to XP on the computer). In the past week, I installed an update for Adobe Reader, and Microsoft Security Essentials stopped a Java Script Trojan. I believe Windows also installed it's monthly anti-virus update. All virus scans have been negative. Beyond that, there has been no other hardware or software changes.
This question was solved.
View Solution.

I found a solution to the problem, through early morning inspiration. I thought as everything disappeared from the Printer folder, and kept being told that the printer was installed, that I would delete and reinstall other drivers that may (or may not) have been in the folder. I seemed to recall that I had the generic Fax driver installed, and the Microsoft XPS Document Writer installed. I went to "Add/Remove Windows Components", and deleted Fax Services. I then went to the Printer file, clicked Add a Printer, and didn't receive the error message that the Print Spooler wasn't running, ect. I then had no problem reinstalling the HP printer, Fax, and XPS drivers.

Booklet printing with HP Officejet Pro 8000 A809n

Can any one help with booklet printing? I have looked at other posts and none seem to quite cover my problem.
I want to print from Microsoft Office Publisher 2003, and have a PC running Windows XP.
The booklet needs printing on A4 (297 x 210mm) paper landscape format with 2 pages (A5) per side.
What prints out is portrait with 4 pages per sheet (A6 size) with the printing on the reverse side inverted.
I've tried all combinations of landscape and portrait etc. and nothing works. As I will need to do these booklets quite often in future I would like to sort it asap.
Thanks for any help.
This question was solved.
View Solution.

Hi there tallboy,
This microsoft article should help out with getting booklets setup and printed. Let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

PDF printing errors with HP Officejet Pro 8000

When printing from FireFox PDF preview I always get a print feed jam error when printing the last 2 pages pages using double sided printing. There as been several documents that fail to print correct characters when using the HP (prints correctly using my Epson 88+).
Firefox version 30
Windows 7 SP1 (home and PRO), all drivers and Windows up to date.
Printer is networked using Linksys E2500 router

hello,
please try this.
The 29.0.1 firefox solved my problem!
Please check: Firefox---> Preferences (options)---->applications tab---->Portable document Format (PDF)----->Preview in firefox
Good Luck!
regards,
GAUTAM SHARMA.

Duplex printing with officejet pro 8000

I am using this officejet pro 8000 to print up some newsletters. When printing a two sided copy (duplex printing) something happens which changes my border setting. Printing the exact same document, but electing one-sided copy renders a perfect border. I would not have a problem copying just one side, then re-loading those in order to make two-sided copies, but the friction caused by the ink on the pages causes mulitple sheets to feed at the same time, jamming the printer. Has HP ever come up with a fix for this? I have seen this problem on the net, but the best folks have done (that I have seen) is to upload drivers for older machines. This has rendered good borders on duplex prints, but diminishes the quality of the print copy. Whatcha think?

Terrible Tom wrote:
Since updating to Snow Leopard, I have had serious problems duplexing. Under the print dialogue window, there is no option to duplex. H.P. blames Mac. Mac blames H.P. I can duplex by going to "layout" and where it says "duplexing off" selecting "long-edge binding" will work. How dumb. Mac Help senior customized my settings by adding "duplex printing" to the "Presets" list.
Are you using the latest drivers from HP? If I set up a printer with the HP Officejet Pro 8000 A809 Series PPD, I can see Two-Sided to the right of Collated if the HP Two-sided Printing Accessory (Duplexer) is checked in the Print & Fax -> Options & Supplies -> Driver tab. If this is not checked, Two-Sided won't appear.
MAC HAS TO CREATE A PATCH TO SIMPLIFY THIS SNOW LEOPARD ERROR!
Apple doesn't write the HP software.
Hope this helps.

How can I get my HP Officejet Pro 8100 to work. I had HP on the phone for over two hours and thought it was fixed. Now it just will not print at all.

How can I get my HP Officejet Pro 8100 to work.
I'm using an iMac (21.5-inch, Late 2013) running Yosemite. I spent hours on the phone with HP who did their best and thought they had solved the problem Now it has stopped printing completely. Just says 'idle' or' connecting to printer' but never does.

Greetings paulr.paulr,
Welcome to the Apple Support Communities!
I understand that you are unable to print from your Mac running Yosemite on your HP Officejet Pro 8100. I know that printer issues can be very frustrating, but I believe the information in the attached article will be able to assist you. I would suggest reading over and systematically working your way through the suggested troubleshooting steps located in the following article. If any issues arise as you work your way through the steps, or if you work your way completely to the end and reset the printing system and the issue continues, please let me know.
OS X Yosemite: Printing troubleshooting
Cheers,
Joe

My iPhone and my iPad are connected by wi-fi, but I can't print on HP Officejet Pro 8500A Plus. On the other hand, I can print over wi-fi from PC. What can I do?

Hallo, thank you for trying to help. Here is my problem:
In the past, the airprint was possible without problems from iPhone 4 and iPad 2. Since today it doesn't work anymore. My iPhone 4 and my iPad 2 is connected by wi-fi and I can serve in the internet. But I can't print on HP Officejet Pro 8500A Plus. On the other hand, I can print over wi-fi from PC.
There are low ink-levels and therefore a message comes to indicate this by printing from PC. iPhone and iPad are accepting the print order without any messages after, but does't excecute the print.
What can I do?

Hey helmut,
You can also try the ePrint method listed here if you can't get AirPrint working:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641898&cc=us&dlc=en&lc=en &product=4116838&tmp_track_link=ot_search
The application HP home and biz app is free in the app catalogue!
Hope this helps.
I work for HP.

HT4356 My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

You can use 3rd party software such as Print n Share if you have a PC or Printopia if you have a Mac.
Or you can check HPs site and see what they have available.

Reg a user set up in grid control who can view properties of one target

Hi,
I am trying to set up a user for grid control who can view only properties of one target. I have tried some options which were suggested but didnt help.when we login i should be able to view only one target to which i am giving view access. but whenever i create a administrator it can view all targets though i give permission to view only one target.does any one have any input on this???
Thanks and regards,
Hema

Hallo Hema,
I've just quickly tried myself and have no issues creating such a limited user. Do you have any roles granted on the user? Is the "PUBLIC" role modified in your company to have some permissions granted?
Can you give a quick overview of what information is displayed on the page when you click "View" for the selected user on the Setup -> Administrators page?
Best regards,
Robert

If I can print to a wireless printer from my Mac, wouldn't it seem like I could print from my iPad mi I and iPhone 5?

I cannot print from my iPhone5 nor my iPad mini, to a wireless HP Photosmart Premium C309g-m. I can print from my Mac book pro. Is it my settings or the printer that is not set up correctly?

First check to see if its airprint enabled, it will be listed in the first article link. If not, then there are other options listed below.
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
Google Cloud Print
http://www.google.com/cloudprint/learn/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Print from iOS device to virtually any printer
http://www.lantronix.com/it-management/xprintserver/xprintserver.html

HP officejet Pro 8000 Can't print when color cart is empty enven when printing in grey scale

I do not use color in my printing. Nonetheless when the printer says my color cartdridge is empty I can not print. I spent a $100 on color cartdridge and never used them. They now show empy and I can't print. Is there a work around or should I just junk this printer. Thanks for your help.
Bob

Hello Bobmcclammy,
I can understand the frustration when the printer, in your case the Officejet Pro 8000, stops and tells you to change inks you are not even using. I too have fought with this in the past. Unfortunately, there is no "work around" for such an issue, at least that I have been able to find.
Even when printing black text only, for example, a resume, the printer will be using a subtle amount of color as a base. Printhead maintenance also will chip away at the ink, this is to ensure the ink is not drying up within the print system. This information will explain more: Ink Usage in Inkjet Printers.
What I have done in order to get the most out of the printer ink is, set the printer in a black only grey scale mode. This needs to be set in the printing preferences in the print driver installed on the computer.
The inks will still need to be replaced, but it should help for the future.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Tutorial: Print index cards without removing paper from tray for Officejet Pro 8000.

The HP Officejet Pro 8000 and Officejet Pro 8000 wireless do not have a slot for inserting index cards and envelopes.
If you are wanting to print index cards without removing the paper from the tray, follow these steps.
The steps below are for 3 x 5 index cards.
1.) Open Microsoft Word
2.) Go to the Insert tab and insert a rectangle shape
3.) Draw a rectangle of any size
4.) Right click on the rectangle and select "Format Autoshape..."
5.) Under the Size tab, enter 5" for the height and 3" for the width (make sure "Absolute" is selected)
6.) Under the Layout tab, select "Center" for the horizontal alignment
7.) Click OK
8.) Use the keyboard up arrow key to move the rectangle to the top of the page. Make sure the top edge of the rectangle touches the top edge of the document.
9.) Print this document on plain 8.5" x 11" paper
10.) When you want to print an index card, place this 8.5x11 document in the paper tray printed side face up. Then place an index card over the rectangle and align with the border of the rectangle. After you print the index card, remove the 8.5x11 paper for the next time you need to print an index card.
Note 1: This are USA instructions. If you live in the UK or other countries you may have different paper size standards.

I can't tell you how much I HATE this printer. I will never buy an HP product again. BROTHERS printers are simply and easy to use.

Printing #10 envelopes using Microsoft Works on Officejet Pro 8000?

I am having trouble printing #10 size envelopes using Microsoft Works 8 on my Officejet Pro 8000. Somehow my settings got messed up causing wrong areas of the envelope to be printed and I need help to reset them. Thanks in advance to anyone who can help me with this.

I can't tell you how much I HATE this printer. I will never buy an HP product again. BROTHERS printers are simply and easy to use.

How do I control who can print over my wireless Officejet Pro 8000 A809n?

Similar Messages

Maybe you are looking for