How do I convert a .cda  to  .wav in Soundbooth CS4?

I have just installed the Premiere CS4 production suite which includes Soundbooth CS4 v 2.0.1.
With earlier versions of this suite (Premiere and Audition rather than Soundbooth), I could open .CDA (music cd) files in Audition and convert them to .WAV files and then import these into Premiere.  It was a frustrating two step process, but at least it worked.
Now, with the CS4 suite, it is not letting me import any .CDA files (error message says the file format is not supported) to either Audition or Premiere.  I even tried going through Encoder, but that doesn't work either.
How in the world are we supposed to bring in music from a CD?  This should have been resolved so we don't have to go through the Soundbooth step.  But now it won't even let me do that!  Adobe sure is turning out to be very frustrating!!

The artwork in the PDF might already be a vector graphic.
If not you need to trace it either automatically or manually

Similar Messages

  • Converting an MP3 to WAV -- How can I convert an MP3 to wav format, 16 bit

    How can I convert an MP3 to wav format, 16 bit, 44,1 khz? I like the program Switch which I know can convert MP3s, but how to I set it up for the specific settings that I need?

    Just import into a logic session. Then bounce at the specs you require. Logic or Waveburner, iTunes and even Quicktime I think can each do this easily.
    A question though. I am assuming you are converting an MP3 to 44.1/16 bit just so you can play the file in a consumer quality CD player?? IF so - that makes sense.
    But if you are doing this because you think it will improve the sound quality of your MP3, I will save you some time here. It won't improve the sound quality at all. It will just turn the MP3 into a larger audio file.
    44.1/16 bit resolution enables you to have a much better sounding file than MP3 formats, but not by going at it this way.
    No offense to you if you know all of this already. I am assuming that you may not know this - because if you did you would also likely know how to convert an audio file.
    Cheers
    Darrell

  • How can i convert a .cda file to an mp3 file

    how can i convert a .cda file to an mp3 file

    Actually, CDA only represents a shortcut of audio track. In reality, it does not have any music file in it. That's the reason why you cannot play the files without the original CD in your computer drive. To solve this problem, you'd better convert your CDA files to the most common mp3 format. To know more about how to do that, you can refer to this article, hope it helps!

  • How can I convert .m4p songs to .wav ?

    how can I convert *.m4p songs in ITunes  to *.wav songs ?

    the only way i have found is thru converter software. i use a program called "avs" it was $30 i believe, maybe $39. but it was the only way i found for me to convert itunes songs to a .wav file so my kids could put those songs on a "sansa" mp3 player.

  • How Do I Convert iTunes Songs to .wav files

    Is there any way to convert iTunes downloaded music to .wav format so they can be used in Adobe Photoshop?

    If your purchases are the new DRM free files from EMI, simply change your import preferences to mp3, then right click on the song you wish to convert, then click on "convert to".
    If the purchase is not one of the new files, you can burn your purchase to an audio CD, that audio CD can be used like any CD you might purchase at your local store.

  • How do you convert mov to wav files?

    How do you convert .mov files to .wav files in iMovie 10? I can no longer find the Share/Quicktime/Options tabs.

    * the .mov container can be handled by any PC with a free download of Quicktime for Windows; but many PC users hesitate doing so, because on the Apple website it looks like you instali iTunes too... many PC don't like that...
    * .mp4 can be handled by any actual PC mediaplayer... again: PC users are used to import .wmv (or the very old .avi container/not supported by YouTube)
    * for exporting .wmv on a Mac, you need to buy a licence at www.flip4mac.com
    * mpeg... the MotionPictureExpertGroup published many codecs... mpeg1, mpeg2, mpeg4, h261, h264. .... but using iM as exporter, all these mpegs will be "hidden" in the QT container .mov... with QTpro you can strip-off the container, but I recommed the beginner to use one of the above mentioned options......

  • How can we convert .mov ( implemented by quicktime APi)  to .WAV file

    Hi,
    How can we convert one .MOV audio file (generated by quicktime API) to .WAV audio file ( need LINER - encoding format).
    Here I dont know the encoding format of .MOV audio input file.
    regards,
    Rams

    mfrasyid1 wrote:
    I wonder why this happens? The "unable to handle.." really does come out twice. Is it because the inputfile.mov which I wanna convert comes from the merging oftwo wave files? If so, then how can I convert this into single wave file? Thank you.That is a weird message, but yes, the .mov file probably stored the 2 original WAV files as 2 tracks of data, rather than 1 track. So whenever it's trying to transcode to a WAV file, it fails to transcode both tracks.
    As for fixing it... I dunno. I know that JavaSound can mix two WAV files at the sample-level, so it actually mixes the sound instead of adding 2 tracks to a file...but I don't know why that's giving you those error messages, unless perhaps it's trying to transcode the video track into an audio track (perhaps the code isn't smart enough to handle transcoding a video file into an audio file? You'd have to check the code to see if that's the case...)

  • How can I convert an AiFF File to a Wav file?

    How can I convert an AiFF File to a Wav file?
    Any free software out there? or can iTunes or Quicktime perform this task?
    -D

    or can iTunes or Quicktime perform this task?
    Yes to both.
    In Quicktime Export -> Export Sound to Wave
    In iTunes, check your preferences for General>Import and then right click on the file to convert to WAV
    Also STP can do that.
    Double click the file to open it in the File Editor and Save as, then select Wave as the filetype.

  • How do I convert an audio link into a wav file?

    how do I convert an audio link into a wav file with my Imac?
    A PC user showed me to right click an audio link where it asked if it wanted to save the link as a Wav file?
    I saw this done in front of me. How do I do it with my Mac ?

    This is how to do it in itunes http://support.apple.com/kb/ht1550
    If I view the song in finder, all that i have to do is press command-i and it opens a window. In the section where you view the name and extension I took off the extension (.mp3 in my case) and replaced it with .wav

  • How can I convert mp3 from my playlist to WAV for powerpoint?

    how can I convert mp3 from my playlist to WAV for powerpoint?

    iTunes: How to convert a song to a different file format - http://support.apple.com/kb/HT1550 - including information about different formats and discussion about compression.

  • How to convert raw data to wav files??

    Hi AnyOne,
    Can anyone know how to do convert raw data in hex format into wav file format??
    Please show some guideline.
    Thank You.

    Hi Craig,
    Thanks for the reply.
    I do follow according the the wav creation standard and save it as wav file. However, i still fail to read back the wav file.
    I using LV8.2. Attach with my testvi and data. Please guide if i make any mistake in my testvi
    Thx and Regards,
    Simon76     
    Attachments:
    data.txt ‏7 KB
    testvi.JPG ‏39 KB
    header.txt ‏1 KB

  • Howe to I convert my I Tune files into MP3 or WAV files

    how to i convert my I Tune files into MP or WAV files

    Hi Bodenlaube,
    Thanks for visiting Apple Support Communities.
    See the tips in this article for help:
    iTunes: How to convert a song to a different file format
    http://support.apple.com/kb/HT1550
    Cheers,
    Jeremy

  • HT3819 How do I convert WAV files in iTunes Library to MP3?

    I have a SwiMP3 device that plays music through headphones while I swim.  It only accepts MP3 files and many of the files in my iTunes library are WAV files.  How do I convert these to MP3?  Thanks, David T

    In your iTunes, set Edit/Preferences/Import Settings to MP3. Then highlight the song you want to convert and click on Advanced/Create MP3 version. A second version of the song will now appear in your Library.

  • How do I convert wav to mp3 in itunes windows?

    How do I convert wav to mp3 in itunes windows?

    You'll need to adjust your import settings to mp3 first. For instructions, see the following document:
    iTunes: About the Add to Library, Import, and Convert functions
    EDIT: sorry, this document is better:
    iTunes: How to convert a song to a different file format
    Message was edited by: b noir

  • How can I convert a wave file to a jpeg file (picture) is it possible???

    Hello:
    How can I convert a wave file to a jpeg file (picture) is it possible???

    zuckini;
    I am pretty sure you know, but just to be completely sure: a wave is (usually) sound signal and a jpeg file is an image.
    If you mean how to display the wave signal in a graph and then save the graph as a jpeg file, then just drop a graph indicator in the control panel, wire the signal. Check any of the example shipped with LabVIEW on how to do this. To get the image, drop a graph indicator's invoke node in the block and select "Get Image". Check this page for detailed information.
    If you have something else in mind, please reply to this message with additional information about the wave signal, the image, etc.
    Regards;
    Enrique
    www.vartortech.com

Maybe you are looking for