How do I convert a Landscape oriented slide to portrait?

I'm trying to create a Flow Chart for a course I'm taking, and it would be more efficient to be in portrait orientation versus landscape.

inspector >document > slide size
click on custom size, then switch the numbers

Similar Messages

How to read ibooks on landscape orientation one page at a time on iPhone 6 Plus

How can I force iPhone 6 Plus to show me only one page at the time on landscape orientation on iBooks. Right now it show me one page at the time if it is in portrait orientation but as soon as I turn the phone to landscape orientation it splits and shows me two pages ie page 1 and page 2.

I've looked everywhere I can think of to change the way that iBooks handles this and cannot find an option to change it. If you choose scrolling view then it will not show two columns but then you scroll to read rather than turning "pages."

How to enable a fixed Landscape orientation ?

Dear all,
How can you design an Analysis Application for iPad so that is always displayed in Landscape orientation ?
I want to disable the Portrait orientation for my Analysis Applicaiton.
Many thanks
Hans

I found a possible CSS-only solution on Stack Overflow - was written for iPhone Portrait but I'd imagine the pixels could be adapted for iPad Landscape.
Source: How do I lock the orientation to portrait mode in a iPhone Web Application? - Stack Overflow
@media (max-height: 480px) and (min-width: 480px) and (max-width: 600px) {
html{
-webkit-transform: rotate(-90deg);
-moz-transform: rotate(-90deg);
-ms-transform: rotate(-90deg);
-o-transform: rotate(-90deg);
transform: rotate(-90deg);
-webkit-transform-origin: left top;
-moz-transform-origin: left top;
-ms-transform-origin: left top;
-o-transform-origin: left top;
transform-origin: left top;
width: 320px; /*this is the iPhone screen width.*/
position: absolute;
top: 100%;
left: 0

How do I convert a FrameMaker file containing both Portrait and Landscape pages into PDF?

I have recently converted to FrameMaker 9 and Acrobat 9. In the FrameMaker manual I am creating, most of the pages have Portait orientation, but some have Landscape orientation. However, when I convert the manual to PDF using Acrobat Distiller, the Landscape pages become Portrait. This wasn't a problem when I converted the manual into PDF in previous versions of Acrobat Distiller, it appeared after I installed Acrobat 9. In other words, the FrameMaker file has worked before. I have also tried this on three different computers to make sure the computer is not the problem. Does anybody have any ideas that I could try to make this work?

Jorunn, did you ever resolve this problem? If not, I've got a solution for you.
In FrameMaker, select the book you want to create a PDF of, click File > Print, and select Adobe PDF as your printer.
Click Properties and make sure you have the selections you want.
Back on the Print Setup dialog, leave the Paper and Orientation as both Letter and Portrait respectively.
On the Print Book dialog, select Print to File and browse to the correct location. Make certain to save this as a PostScript file (name.ps) and at the Safe Book As field, you want Single File selected.
Again on the Print Book dialog, click the checkbox for Generate Adobe Data and click PDF Setup. On the PDF Setup for Selected Files dialog, at the PDF Job Options, select Press Quality or make the appropriate choices for your situation for Settings, Bookmarks, Tags, and Links.
With Adobe Distiller open, File > Open and browse to the .ps file you indicated earlier. Also verify your Default Settings for the PDF are correct. When Distiller is finished, you can double-click the PDF file to open it and check that your portrait and landscape pages show correctly.

How do i convert a landscape txt file to a landscape pdf. i only get portrait when i convert

When I convert a text file that is in landscape format the converted file comes in as a portrait pdf

What steps are you using to convert your text file to PDF?

Can't get Lollipop lock screen to show analogue clock when in landscape orientation

I use a magnetic dock to charge my Z3C at night, at which time it doubles as my bedside clock. Unfortunately, while I prefer the analogue clock, the lock screen switches to digital as soon as the handset display is rotated to the landscape orientation.
In portrait, even with the magnetic dock attached, I can choose the analogue clock either through the settings or by using a long tap on the digital clock and swiping to analogue.
In landscape mode, which is only available when attached to the dock, the analogue display reverts to digital. A long tap on the clock does not seem to have any effect.
Is anybody else experiencing this? Any solutions? I've tried a few DayDream apps, but I'd rather get the native lock screen working, because it's better in other ways.

@Briaetta
I was able to recreate the issue, contact Sony directly
http://support.sonymobile.com/global-en/contactUs/
perhaps @Rickardcould comment on this.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

I have a 2 page PDF (portrait format), how can I convert the format to landscape?

I have a 2 page (portaait format) PDF file how can I convert the PDF file into landscape format before I change it to XL?

Hi jsremick,
To change the page orientation of a PDF, you need to use Acrobat. (Reader allows you to rotate the page view, but not the pages themselves).
If you don't have Acrobat, feel free to give it a try. You can download the free 30-day trial from http://www.adobe.com/products/acrobat.html.
Best,
Sara

Convert to PDF in landscape orientation

Hi experts !
I´m using the CONVERT_ABAPSPOOLJOB_2_PDF function to convert a txt into PDF, but i have not found, how to convert this
in landscape orientation, anybody can help me, pls.
Thanks in advanced !

Hi,
I never face this problem.
While searching i find some help for you.
Please visit this link. This link may contains solution for your problem.
Re: Downloading converted PDF file - output is truncated
May this helps you.
Regards.
Deepak Sharma.

How can I change one section of the document to a landscape orientation and not the whole document?

How can I change one section of the document to a landscape orientation and not the whole document?

Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry

How do I convert a powerpoint presentation saved as pdf to an editable word document minus all the frames around the slides?

How do I convert a powerpoint presentation saved as pdf to an editable word document minus all the frames around the slides?

Hi Sara!
Yes this sounds interesting. Can I update to that from the PDF Export I have just renewed? How much would that cost?
Thanks for your quick answer.
Best Regards
Per-Olof Egli Logga Egli C.I.S
Managing Director
Egli C.I.S. Consulting
Lapphundsgränd 43
SE-128 62 SKÖNDAL
Sweden/Швеция
Phone: +46 708 23 03 53
<http://www.eglicisconsulting.se/> www.eglicisconsulting.se
<mailto:[email protected]> [email protected]
Skype: eglipo
Från: Sara.Forsberg
Skickat: den 10 september 2014 22:11
Till: P-o Egli
Ämne: How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
created by Sara.Forsberg <https://forums.adobe.com/people/Sara.Forsberg> n Adobe ExportPDF - View the full discussion <https://forums.adobe.com/message/6718870#6718870>

How do I convert a power point document to a pdf where it will show the notes for each slide?

How do I convert a power point document to a pdf where it will show the notes for each slide?

To get the 'handout view' with a slide and the speaker notes on the same page, you have to save the PDF file directly from PowerPoint (the later versions of Microsoft Office can make PDF files without the help of Acrobat).

How to change to landscape orientation in Pages for iPhone4s?

Does anyone know how to change to landscape orientation in Pages for iPhone 4s and iPad?

The functionality on an iPhone is greatly diminished when having to work in potrait mode due to the screen size; it really becomes a bit useless.
It seeems a no-brainer; I guess that's why I asked on the forum.
Maybe someone else knows more.?
I hope that you're not right but think you probably are.
Thanks again for offering to help!

How do I print text document (spreadsheet) in 11 x 17 format with landscape orientation?

Print preview shows only in portrait orientation when I get an image at all, then when I hit "print" icon, get instant message that says "out of memory". Also cannot seem to get printer to recognize 11 x 17 size -- keeps saying that printer settings & paper size do not match.

Don't want to come across as ungrateful, but I'm NOT impressed with how these postings are being handled. Guess I should expect that with HP -- ever since their calculators came out with RPN, the culture of HP has been different from most others.
To repeat myself, my printer is HP B8550 Photosmart, capable of wide format printing -- the reason I purchased this one after reading reviews by others of all its features. My OS is Windows XP Home Edition. My problem is with trying to print out a spreadsheet format of a large genealogical database that I have created, using Windows Works. When I open the file, create the desired printer settings, and perform the page set-up tasks, all I get when I hit "print preview" is an error message that says "out of memory", which prevents any further action. When I clear that from the screen & try to see a print preview, I get a truncated image of the spreadsheet in PORTRAIT orientation & not the LANDSCAPE orientation that I have set the document printing for.
While awaiting a useful response from yesterday's forum (& not getting one), I tried a different Word document while using the same 11 x 17 sheet size setting for the printer, & that document was processed without a hiccup. I'm now more inclined to believe that there is something wrong with my Window Works software & NOT the printer software that just doesn't want to deal with 11 x 17 spreadsheets in queue or out on the stack (or heap -- wherever the machine stages such data for processing), but I just don't know. Made a separate file using just one page of the database, thinking that maybe the 4.5 MB file size was the problem, but that had absolutely no effect on the situation -- it won't print even that small file as structured. To display all the data, I need to use landscape orientation. Puzzled why it won't show in that orientation even within print preview.
ANY advice on how to get this project to work properly is appreciated -- it represents about 8 years' worth of work in creating it & I'm ready to make a hard copy to use while doing on-site work at various archives holding such records.

I have managed to lock the landscape orientation on my iphone 3 - any ideas as to how I unlock it please?

I have managed to lock the landscape orientation on my iphone 3 - any ideas as to how I unlock it please?

Im not aware that you can lock your screen in landscape so I'm assuming you have locked it in portrait and want to allow it to ne seen landscape, therefore double click the Home button, swipe the icons to the right, you will see an icon with a circle-arrow. That is your screen orientation lock.
Assuming again you have iOS5 have a look at the following for more help, page 21
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

CS4: How to set up landscape orientation doc with dual page setup vertical not horizontal

I'm an InDesign newbie and am trying to set up document presets for a landscape-oriented document that will have binding at the top and bottom edges of the page, not the default left and right edges. So when I open up my spread of pages 2 and 3 I want to see page 2 ABOVE page 3 not to the left of it.
I can't see any way to do this. Am I missing something or is this just not possible in InDesign CS4 (v6.0.6)?

The closest you can come out of the box is to set up a facing pages document using portrait orientation, then select the spreads in the Pages panel and Rotate Spread View 90 degrees Counter-Clockwise before you begin the layout.
This will allow you to work "as if" your pages were landscape and bound on the long edges, but things like x and y coordinates will be swapped bcause you are really still working on rotated pages.

How do I convert a Landscape oriented slide to portrait?

Similar Messages

Maybe you are looking for