How do I convert an exported excel document to numbers? I am able to get the data into numbers but I can't read it.

I am trying to get an excel document I exported from Wufoo into numbers on my mac. It works but I cannot read the data.

I got it to work!! Just had to select Commas (.csv) instead of excel for the export. What happened before was that I chose .xls to export the data and when I tried to open the file in Numbers, it showed an error.
Import Warning - This is a tab delimited document, not a valid Excel document. The data might look different.
the data was all symbols etc..
Thanks for replying to my question!

Similar Messages

  • How do I convert a power point document to a pdf where it will show the notes for each slide?

    How do I convert a power point document to a pdf where it will show the notes for each slide?

    To get the 'handout view' with a slide and the speaker notes on the same page, you have to save the PDF file directly from PowerPoint (the later versions of Microsoft Office can make PDF files without the help of Acrobat).

  • When I want to play music out loud the volume bar disappears and it won't play music or any sound. This sometimes happens with head phones in aswell. How do I fix it? I have tried to reset settings and wipe all the data of it but it didn't work.help!

    When I want to play music out loud the volume bar disappears and it won't play music or any sound. This sometimes happens with head phones in aswell. How do I fix it? I have tried to reset settings and wipe all the data of it but it didn't work.help!     

    Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
    Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
    If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
    Let us know how you get on.

  • Extracting data from Legacy system - How do we get the data into a normaliz

    Hi All,
    Requirement that I have now is to get the data from 6 different tables ORACLE database to BI using DB Connect, where in each of those 6 tables has the transactional data as well - If it is only 2 tables, would have been creating a view and get the data. Each of the 6 tables are linked to one other by the Primary Key and Foreign key relation ship.
    If it is from ERP system we would have created a Functional Module.
    Please advice me on how to get the data to BI end from those tables in Legacy system.
    Thanks in advance.

    Anil:
    I recommend following Ralph Kimball's EDW data modeling principles.
    Have a staging layer of DSO's with data dump from source system. So have 6 different DSO's extracting data from 6 tables from source system independently.
    Then have an integeration layer of DSO's depending on requirement. You could combine data from 2 or more DSO's here based on requirement and integrate your data here. Use primary key foreign key relationships here to do look ups or direct loads to do your business logic.
    Then have an analytical layer of InfoCubes, MultiProviders, InfoSets as required.
    The 3 layered architecture is a standard best practice that i have seen followed in many organizations. You could search for this type of architecture online under EDW (Enterprise Data Warehouse). There should be plenty of information available.
    Good Luck.
    MP.

  • How do i convert an existing excel file to numbers?

    Just got a mac and need to convert an excel file to numbers, how do i do that?

    You can try File > Open, navigate to the .xlsx or .xls Excel file and choose it. Depending on how complicated the worksheet is, you may have to make adjustments to it in Numbers.
    SG

  • How do I convert an Adobe PDF file to Word on my Mac with all the data intact?

    How do I convert a scanned Adobe PDF file to Word on my Mac with all the data intact?

    http://www.macworld.com/article/1162699/how_to_convert_pdfs_to_word_and_other_fo rmats_.html
    https://itunes.apple.com/us/app/pdf-converter-free/id422540367

  • How to get the data into BW: Extractor 0HR_PA_HAP_3 (appraisals)

    Hi,
    I have installed BC for Appraisals. I want to use extractors 0HR_PA_HAP_3 and 0HR_PA_HAP_2. In SAP R/3 RSA3 give me the results I expect (multiple appraisal documents). I get result in RSA3 with or without selection (the selection works correct).
    In BW I also installed BC. Every object in the dataflow is active. When loading apraissal data I get 0 records. It does not make any difference what selection I make in the infopackage. The monitor just ends with 'no data selected'.
    Does anyone know what can cause the fact that BW does not select any data while RSA3 gives results ?
    Thank

    For people who face a similar problem: It turned out to be an authorization problem. The RFC user who accesses R/3  and collects the data did not have sufficient right to excute this. A authorization trace lead us to this.

  • How to get the data into select options if we have 10 select options

    Hi Experts,
         I facing problem to get the data from diffrent tables and different select options.
    I have to pass different parameter ranges.
    SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: rb1 RADIOBUTTON GROUP g1.     "Existing Key Accounts
    PARAMETERS: rb2 RADIOBUTTON GROUP g1.     "Potential Key Accounts
    SELECT-OPTIONS: s_part FOR but000-partner."Business Partner Number
    PARAMETERS: p_bpkind LIKE but000-bpkind.    "Business Partner Type
    PARAMETERS: p_but000 LIKE but000-partner.   "Key Account Manager
    SELECT-OPTIONS : s_vkont FOR fkkvkp-vkont. "Contract Account
    SELECT-OPTIONS : s_ktokl FOR fkkvkp-ktokl. "Debtor Type
    SELECT-OPTIONS : s_sparte FOR ever-sparte.  "Division
    SELECT-OPTIONS : s_vertra FOR ever-vertrag. "Contract
    SELECT-OPTIONS : s_budat FOR erdk-budat.   "Invoice Date
    SELECT-OPTIONS : s_netto FOR dberchv-nettobtr."Billing Amount
    SELECT-OPTIONS : s_abrm FOR abc.               "Consumption Value
    SELECTION-SCREEN: END OF BLOCK b1.
    need response asap.
    Thanking you.
    Regards Surya Ramireddy

    HI,
    You can use as many Select-options in the select statment,
    Select XXXX yyyy from TABLE where FIELD In S_FIELD1 and
    FIELD2 In S_FIELD2.
    Regards
    Sudheer

  • How to create a procedure in oracle to write the data into file

    Hi All,
    I am just wondered on how to create a procedure which will do following tasks:
    1. Concat the field names
    2. Union all the particular fields
    3. Convert the date field into IST
    4. Prepare the statement
    5. write the data into a file
    Basically what I am trying to achieve is to convert one mysql proc to oracle. MySQL Proc is as follows:
    DELIMITER $$
    USE `jioworld`$$
    DROP PROCEDURE IF EXISTS `usersReport`$$
    CREATE DEFINER=`root`@`%` PROCEDURE `usersReport`(IN pathFile VARCHAR(255),IN startDate TIMESTAMP,IN endDate TIMESTAMP )
    BEGIN
    SET @a= CONCAT("(SELECT 'User ID','Account ID','Gender','Birthdate','Account Registered On') UNION ALL (SELECT IFNULL(a.riluid,''),IFNULL(a.rilaccountid,''),IFNULL(a.gender,''),IFNULL(a.birthdate,''),IFNULL(CONVERT_TZ(a.creationDate,'+0:00','+5:30'),'') INTO OUTFILE '",pathFile,"' FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '' LINES TERMINATED BY '\n' FROM account_ a where a.creationDate>='",startDate,"' and a.creationdate <='",endDate,"')");
    PREPARE stmt FROM @a;
    EXECUTE stmt;
    DEALLOCATE PREPARE stmt ;
    END$$
    DELIMITER ;
    Regards,
    Vishal G

    1. Concat the field names
    Double Pipe (||) is the concatenation operator in Oracle. There is also a function CONCAT for this purpose
    2. Union all the particular fields
    Not sure what do you mean by UNION ALL particular fields? UNION ALL is a set operation applied on two different result sets that have the same projection.
    3. Convert the date field into IST
    SQL> select systimestamp "Default Time"
      2       , systimestamp at time zone 'Asia/Calcutta' "IST Time"
      3    from dual;
    Default Time                                       IST Time
    05-05-15 03:14:52.346099 AM -04:00                 05-05-15 12:44:52.346099 PM ASIA/CALCUTTA
    4. Prepare the statement
    What do you mean by prepare the statement?
    5. write the data into a file
    You can use the API UTL_FILE to write to a file.

  • How to get the data of Open Opportunities and Closed Opportunities

    Hi Guys,
      i'm studying about Sales Opportunities in SAP BusinessOne.
    i'm able to get the data about Sales Opportunities(i enterd), Opportunities Report and Lost Opportunities.
    But i dont know how to get information about Open Opportunities Reports and Closed Opportunitiesn Reports.i'm unable to find even their names of tables.
    plz send a reply.................
       with regards,
    santh

    Thanq Alexey for ur Helpful Answer,
       i'm aware about execution of a query in the Query Analyzer of SQL Server.but i dont know how to move to ShowDebugInformation Menu.
       can i find it in  the SAP Business One Tool. or do i need
    to check any data base help given by B1(Ex:- REFDB2004).
        plz give answer for  this also............
      with regards,
    santh

  • How to get the data from multiple tabes into single table

    hi all,
    here i am having 10 data base tables,how to get the data into a single table.
    regards,
    subba reddy

    hi,
    non XI/PI related
    Regards,
    Michal Krawczyk

  • I've uploaded 4 pdf documents. Now how do I convert them to Excel format?

    I've uploaded 4 pdf docs. Now how do I convert them to Excel format so I can manipulate the data?
    linda93790

    Hi linda93790,
    If you uploaded your files to http://cloud.acrobat.com, simply click on one of the PDF files, then click 'ExportPDF' from along the top-bar in your browser.  This will automatically load that PDF into the ExportPDF system.  From there, you can configure any options you may need and convert the file to an .xlsx file.
    Please let us know if you have any questions!
    Thanks,
    David

  • How do I make Word and Excel Documents readable to PC users that cannot open them

    How do I make Word and Excel Documents readable to PC users that cannot open them

    Be sure to save them in the Office 2007 format as .doc or .xls files.

  • How do I convert a Dutch pdf document to Word ?

    How do I convert a Dutch pdf document to Word ?

    While the ExportPDF service doesn't support Dutch at this time, it does support French, which uses a similar character set.  You may want to try choosing French as the OCR language.
    Let us know how it goes.
    -David

  • My computer is frozen when exporting a document from numbers. How do I unfreeze without loosing the work I've done? Thanks for helping out

    I was exporting a document from numbers during exporting the process it didn't finish and froze the export process. How do I unfreeze and not loose the document.
    Thanks in advance for your help
    David

    As for the "Session could not be started for iPod" problem, just (Mac OS X only):
    1. Quit iTunes.
    2. Open Terminal.
    3. Copy and paste into terminal:
    defaults write com.apple.iTunes DeviceBackupsDisabled -bool true
    Hit Return.
    4. Open iTunes.
    5. Make sure iOS device is plugged in and let it sync. That command that you needed to copy and paste into Terminal will disable the backup process when your iPod is plugged in and syncing.
    6. Quit iTunes after iPod is finished syncing.
    7. Return to Terminal and copy and paste the same command, but change "true" to "false".  Hit Return.
    8. Open iTunes.
    9. Backup should go smoothly.

Maybe you are looking for