How do I convert from .aif to MPEG?

I have an audio file in .aif format. I want to convert it to MPEG to save space. I remember that there is a way to do this using iTunes, but I can't remember or Google up the exact steps. Can someone tell me how to do this?

Click here and follow the instructions.
(34978)

Similar Messages

ITunes 11 has converted some songs to Quicktime movie format. How can I convert them back to MPEGs? format

iTunes 11 has converted some songs to Quicktime movie format. How can I convert them back to MPEGs?

I didn't mess with the iTunes Media folder previously, so I don't think that was the cause. Anyway, I manually fixed most of the songs, but I still can't figure out how to fix the movies that became listed as songs.
Here is a screenshot of what it looks like when I click on "Get Info" for one of the movies (which has ended up in the music section on iTunes):
There is no option to change the media kind to "movie" or "video" even though it is a movie and it still plays as a movie if I press play.

How do I convert from a pdf to a word document?

How do I convert from a pdf to a word document?

Hi SGU,
There are 2 Ways to do this ...
1. Either Use Adobe Export PDF Service .. Please Refer : https://www.acrobat.com/exportpdf/en_GB/convert-pdf-to-word.html
2. Use Adobe Acrobat to do it ... Refer : http://www.adobe.com/products/acrobat/pdf-to-word-doc-converter.html

How do I convert from PDF to Word step by step instructions needed..am practically computer illiterate

How do I convert from PDF to Word step by step instructions needed..am practically computer illiterate@

Ok, fine. That isn't Acrobat, and that's why our instructions weren't much use. (But it's worth saying "I didn't have that option" rather than "it's not converting", we could end up wasting a lot of your time with the wrong stuff!)
Anyway, the free Adobe Reader can't do this conversion without a subscription called either ExportPDF or PDF Pack. You may have had one in the past. Are you still paying for one?

How do I convert from imovie to wmv format

how do I convert from imovie to wmv format

Spend some money at http://flip4mac.com and then do some homework regarding exports from iMovie to QuickTime formats.
Then spend some more money to buy the Pro upgrade to QuickTime Player 7 so you can use this third party software (not supported by the newer versions of iMovie).

How do I convert from PDF to jpeg.

How do i convert from pdf to jpeg

Hi michaelw55080095,
I'm sorry this is so frustrating for you. It's certainly not meant to be! Please log out, and clear the browser cache. Then log back in to https://cloud.acrobat.com.
If you're still having trouble, let me know.
Best,
Sara

Mac Convert MPEG to AVI, FLV to AVI, F4V, and Quicktime MOV to AVI. You can also convert from AVI to MPEG or other major formats.

What is tyhe best video /audio converter to use on a Mac? To convert
Convert MPEG to AVI, FLV to AVI, F4V, and Quicktime MOV to AVI. to convert from AVI to MPEG or other major formats?

I prefer using Mac Video Converter software to do video conversion. I convert Quicktime MOV to AVI so that I can play the video on PS3.

How to create "convert from PDF to Word?"

How to create "convert from PDF to Word?"

Good day,
To use the ExportPDF service, simply visit http://exportpdf.acrobat.com and click 'Sign in' at the top right corner. Enter your Adobe ID (email address) credentials to log into the service. As ExportPDF is web-based, you simply utilize the tool through your web browser. After you're logged in, you should see the ExportPDF interface, with a button saying 'Select PDF file..' to get the process started.
Please let us know if you have any questions.
Kind regards,
David

Rendering while converting from DVD using MPEG Streamclip or Cinematize

Is there anyway to make rendered .mov file, while converting from DVD to .mov, using MPEG Streamclip or Cinematize for final cut pro?
Thanks.

Are you asking if there's a way to export from mpegstreamclip so you don't need to render when you edit with the file in fcp? If so, yes... (sorry couldn't resist).
What format is your sequence in fcp (make the timeline active and hit command(apple)-zero? Note the pixel dimensions, frame rate and compressor settings and set the quicktime options in mpegstreamclip export dialog to match them. You should be good to go.
Also, you might do some searching here. Pretty sure someone posted a link to a tutorial on how to do this,

How do I convert from PAL to NTSC in compressor?

I have a project I converted from mp4 file to Apple Pro Res to edit it in FCP. I exported using Compressor and tried to import the files to DVD Studio Pro. It said it can't put PAL files into an NTSC project. I didn't even realize it was filmed in PAL (yes, I have the rights to use the footage). How do I convert the files from PAL to put it into FCP...in Compressor? If so, how? Thanks for any help!

To convert the 25fps PAL file to a 29.97fps file staying within the ProRes codec:
• Open up compressor. In the Settings window select: Apple>Formats>Quicktime>ProRes 422
• Select the "Duplicate Selected Setting" icon in the upper left of the Settings window
• This creates duplicate of the preset that you can edit
• Select the preset copy and, in Inspector, give it a new name (something like ProRes PAL>NTSC)
• In Encoder>Video Settings>Frame rate - and change the frame rate to 29.97
• In Frame Controls> turn them on and set Resize Filter and Rate Conversion to BETTER. (If so set them to BEST, be prepared for a long wait)
• In the Geometry tab, set the Frame Size to 720x480 (you don't say if the file is 16:9 or 4:3)
• Submit the file and go have dinner. Depending on the length of the file, it may take hours.
Have fun.
x

How can I convert from Modbus raw data to engineering units using a formula?

Within Lookout, I have several Modbus numerical input types that do not have a linear corespondence to the Engineering values they represent. How can I display these values accurately using a formula to convert from the raw data to an engineering value?

I don't quite understand your reply. I'm using Lookout 6.0.2, logged in as Administrator, in Edit Mode. The Modbus object is named RTU06_SAV. The Active member is 30002 with an alias of SAVfmSMT_RSL.
Following your instructions, I opened Object Explorer and right-clicked on RTU06_SAV.
This opened a menu containing: Refresh, Cut, Copy, Rename, Delete, Edit connections..., Edit Data Member Configuration, Configure Network Security and Properties.
I assumed that I should select Edit Data Member Configuration, but maybe I'm wrong.
Within Data Member Configuration I can set up Linear Scaling between Raw data and Engineering data. I know how to do that, but what I need to know is how to convert Raw data to Engineering data using a formula representing a non-linear transformation (such as a converion to a logarithmic value or perhaps a formula derived by fitting the formula to a curve on a calibration chart).
Once I have this my Engineering data can be represented on a control panel as both a numeric value AND as a correctly reading Gauge. It can also be properly represented on a HyperTrend graph.
What do you suggest?

How do i convert by dvds using mpeg on a windows?

i wanted to convert my dvds using mpeg so i couls put it on my ipod but i don't know how. can someone walk me through it? (on a windows, not mac)
hp Windows XP 4 GB blue mini, 80 GB black iPod viseo
hp Windows XP 4 GB blue ipod mini, 80 GB black iPod video

this link will tell you how to rip and convert your dvd's so you can put them on your ipod.
http://forums.ilounge.com/showthread.php?s=&threadid=123067

How do I convert from pdf to word? I see an option to do so, however, when I click on it, Ia box opens...

when I try to convert from pdf to word, a box opens and suggests I am to click on (select) the file I want to convert. It sounds all well but it does not work. I really really just want my files back in word, all of them, no matter, because after having to reinstall windows 7 (done by techs) and me having to re-download all my HP drivers, and tools, and other software, which I imagine included adobe reader, now I see some pdf files won't open. It says, "access denied" and boy that really makes me wantt o scream. I am the ONLY user, it is my notebook, I am the administrator so I can't figure out why some files open and some don't. I can't ascertain any difference.
I would be grateful for any help. This has become just too exhausting. After reinstalling sooooooooo much, then to have to go through this with what is a free application? I say I think not.
This should NEVER happen with any free application and boy there is NO help to be found. They blow you off the phone fast telling you it's a free application. Then why are you putting in this kind of stuff that it won't open? This is NOT a shared notebook, it's mine. I am the only user, personal use.
HP probook, if anyone needs that info.
Please, will someone help?
I would be so grateful.
thanks,
Gina

Gee, Pat, this is a real big help.
Nobody could possibly think anyone would ask for help without first trying to fix the issue oneself. Or maybe you do. I have opened the file and looked under security. I have changed it to owner-notebook (which is what the techs called me) and clicked accept but geepers it didn't work.
Maybe someone else has an idea.
Take Ownership of a File or Folder
The above should be a link. At least I copied and pasted the link. I did what was stated in there. It isn't like brain surgery. But it is not working. I ended up being able to open some pdf files after transferring them from one partition category to another. I wish it was that easy as you seem to think.
Thanks for the help. Have a great year.

How do i convert from pdf to word

how do i convert my pdf doc to word

Hi,
Please check the below mentioned article(Getting started with export PDF)
http://forums.adobe.com/docs/DOC-2412
~Pranav

How do I convert from pdf to pdfa in Acrobat 9?

How do I convert a pdf to a pdfa using acrobat 9? I have windowx xp home edition. When I try to hit "save as", more options etc, I am not getting the option to save as pdfa. Rather, it is simply saving the document. Thanks.

For Acrobat 9 Pro it is:
File > Export > PDF/A
Be well...

How do I convert from .aif to MPEG?

Similar Messages

Maybe you are looking for