How do I convert from AVI or FLV to SWF file?
First, I'm a complete Flash novice...this is the first time
I've dealt with any FLV or SWF files. So, please forgive my
ignorance on these topics. I have several small AVI files and have
successfully converted them to FLV format via Premiere Pro CS3 and
Adobe Media Encoder. But the client is also asking for SWF files of
the same videos. I've looked and looked for a way to save SWF
files. I tried pulling the video into Flash CS3, and saving as SWF,
but since I know nothing about using Flash, I don't seem to be
doing it correctly...seems like I'm getting just a single blank
frame. I've looked at the dozens of third party programs that claim
to be able to convert FLV to SWF, but the one I downloaded "Free
Video to Flash Converter" generated an SWF file that doesn't seem
to be playable anywhere. If there is a click-by-click method for
using Flash to perform the conversion, I'd be ever so grateful.
Again, please forgive my Flash-ignorance. Thanks for your help.
Why doesn't Flash have a built-in capability to convert FLV
to SWF? It's an obvious need and there are 3rd party programs of
varying quality that do it. Why should people who have already
purchased Flash need to look for something that handles this OK and
then install it on their machines?
Similar Messages
-
What is tyhe best video /audio converter to use on a Mac? To convert
Convert MPEG to AVI, FLV to AVI, F4V, and Quicktime MOV to AVI. to convert from AVI to MPEG or other major formats?I prefer using Mac Video Converter software to do video conversion. I convert Quicktime MOV to AVI so that I can play the video on PS3.
-
How do I convert from a pdf to a word document?
How do I convert from a pdf to a word document?
Hi SGU,
There are 2 Ways to do this ...
1. Either Use Adobe Export PDF Service .. Please Refer : https://www.acrobat.com/exportpdf/en_GB/convert-pdf-to-word.html
2. Use Adobe Acrobat to do it ... Refer : http://www.adobe.com/products/acrobat/pdf-to-word-doc-converter.html -
How do I convert from PDF to Word step by step instructions needed..am practically computer illiterate@
Ok, fine. That isn't Acrobat, and that's why our instructions weren't much use. (But it's worth saying "I didn't have that option" rather than "it's not converting", we could end up wasting a lot of your time with the wrong stuff!)
Anyway, the free Adobe Reader can't do this conversion without a subscription called either ExportPDF or PDF Pack. You may have had one in the past. Are you still paying for one? -
How do I convert from imovie to wmv format
how do I convert from imovie to wmv format
Spend some money at http://flip4mac.com and then do some homework regarding exports from iMovie to QuickTime formats.
Then spend some more money to buy the Pro upgrade to QuickTime Player 7 so you can use this third party software (not supported by the newer versions of iMovie). -
How do I convert from PDF to jpeg.
How do i convert from pdf to jpeg
Hi michaelw55080095,
I'm sorry this is so frustrating for you. It's certainly not meant to be! Please log out, and clear the browser cache. Then log back in to https://cloud.acrobat.com.
If you're still having trouble, let me know.
Best,
Sara -
How to extract keyframe from AVI and MPG
Hi guy,
I'm Marco and I'm using JMF; I need for an help because I don't know how to extract keyframes from AVI and MPG files.
I'm using the code posted in this forum for extracting all frame in a video with the adding of an if expression that in the accessFrame method that I report below:
void accessFrame(Buffer frame) {
BufferToImage stopBuffer = new BufferToImage((VideoFormat) frame.getFormat());
Image stopImage = stopBuffer.createImage(frame);
try {
BufferedImage outImage = new BufferedImage(size.width, size.height, BufferedImage.TYPE_INT_RGB);
Graphics og = outImage.getGraphics();
og.drawImage(stopImage, 0, 0, size.width, size.height, null);
Iterator writers = ImageIO.getImageWritersByFormatName("jpg");
ImageWriter writer = (ImageWriter) writers.next();
File f = new File(frame.getSequenceNumber() + ".jpg");
{color:#ff0000}
if ((frame.getFlags() & Buffer.FLAG_KEY_FRAME) != 0){{color}
{color:#ff9900}
ImageOutputStream ios = ImageIO.createImageOutputStream(f);
writer.setOutput(ios);
{color}
{color:#ff9900}
writer.write(outImage);
ios.close();}
} catch (IOException e) {{color}
System.out.println("Error :" + e);
So, I'm able to extract some keyframe, but i'm not sure it is the correct way and my dubt grows out of the fact that without the if expression highlighted in red, it seems that I have more keyframes (those ones with flag ==1040). Another problem is that it works only with AVI because MPG instead of 1040, they have alternate sequence of 32 and 1056.
Cheers and thank u
Marcomy email-id is [email protected].. anyone plz send me the codings for extracting all the frames from a video..
-
How to create "convert from PDF to Word?"
How to create "convert from PDF to Word?"
Good day,
To use the ExportPDF service, simply visit http://exportpdf.acrobat.com and click 'Sign in' at the top right corner. Enter your Adobe ID (email address) credentials to log into the service. As ExportPDF is web-based, you simply utilize the tool through your web browser. After you're logged in, you should see the ExportPDF interface, with a button saying 'Select PDF file..' to get the process started.
Please let us know if you have any questions.
Kind regards,
David -
How to convert from SQL Server table to Flat file (txt file)
I need To ask question how convert from SQL Server table to Flat file txt file
Hi
1. Import/Export wizened
2. Bcp utility
3. SSIS
1.Import/Export Wizard
First and very manual technique is the import wizard. This is great for ad-hoc and just to slam it in tasks.
In SSMS right click the database you want to import into. Scroll to Tasks and select Import Data…
For the data source we want out zips.txt file. Browse for it and select it. You should notice the wizard tries to fill in the blanks for you. One key thing here with this file I picked is there are “ “ qualifiers. So we need to make
sure we add “ into the text qualifier field. The wizard will not do this for you.
Go through the remaining pages to view everything. No further changes should be needed though
Hit next after checking the pages out and select your destination. This in our case will be DBA.dbo.zips.
Following the destination step, go into the edit mappings section to ensure we look good on the types and counts.
Hit next and then finish. Once completed you will see the count of rows transferred and the success or failure rate
Import wizard completed and you have the data!
bcp utility
Method two is bcp with a format file http://msdn.microsoft.com/en-us/library/ms162802.aspx
This is probably going to win for speed on most occasions but is limited to the formatting of the file being imported. For this file it actually works well with a small format file to show the contents and mappings to SQL Server.
To create a format file all we really need is the type and the count of columns for the most basic files. In our case the qualifier makes it a bit difficult but there is a trick to ignoring them. The trick is to basically throw a field into the
format file that will reference it but basically ignore it in the import process.
Given that our format file in this case would appear like this
9.0
9
1 SQLCHAR 0 0 """ 0 dummy1 ""
2 SQLCHAR 0 50 "","" 1 Field1 ""
3 SQLCHAR 0 50 "","" 2 Field2 ""
4 SQLCHAR 0 50 "","" 3 Field3 ""
5 SQLCHAR 0 50 ""," 4 Field4 ""
6 SQLCHAR 0 50 "," 5 Field5 ""
7 SQLCHAR 0 50 "," 6 Field6 ""
8 SQLCHAR 0 50 "," 7 Field7 ""
9 SQLCHAR 0 50 "n" 8 Field8 ""
The bcp call would be as follows
C:Program FilesMicrosoft SQL Server90ToolsBinn>bcp DBA..zips in “C:zips.txt” -f “c:zip_format_file.txt” -S LKFW0133 -T
Given a successful run you should see this in command prompt after executing the statement
Starting copy...
1000 rows sent to SQL Server. Total sent: 1000
1000 rows sent to SQL Server. Total sent: 2000
1000 rows sent to SQL Server. Total sent: 3000
1000 rows sent to SQL Server. Total sent: 4000
1000 rows sent to SQL Server. Total sent: 5000
1000 rows sent to SQL Server. Total sent: 6000
1000 rows sent to SQL Server. Total sent: 7000
1000 rows sent to SQL Server. Total sent: 8000
1000 rows sent to SQL Server. Total sent: 9000
1000 rows sent to SQL Server. Total sent: 10000
1000 rows sent to SQL Server. Total sent: 11000
1000 rows sent to SQL Server. Total sent: 12000
1000 rows sent to SQL Server. Total sent: 13000
1000 rows sent to SQL Server. Total sent: 14000
1000 rows sent to SQL Server. Total sent: 15000
1000 rows sent to SQL Server. Total sent: 16000
1000 rows sent to SQL Server. Total sent: 17000
1000 rows sent to SQL Server. Total sent: 18000
1000 rows sent to SQL Server. Total sent: 19000
1000 rows sent to SQL Server. Total sent: 20000
1000 rows sent to SQL Server. Total sent: 21000
1000 rows sent to SQL Server. Total sent: 22000
1000 rows sent to SQL Server. Total sent: 23000
1000 rows sent to SQL Server. Total sent: 24000
1000 rows sent to SQL Server. Total sent: 25000
1000 rows sent to SQL Server. Total sent: 26000
1000 rows sent to SQL Server. Total sent: 27000
1000 rows sent to SQL Server. Total sent: 28000
1000 rows sent to SQL Server. Total sent: 29000
bcp import completed!
BULK INSERT
Next, we have BULK INSERT given the same format file from bcp
CREATE TABLE zips (
Col1 nvarchar(50),
Col2 nvarchar(50),
Col3 nvarchar(50),
Col4 nvarchar(50),
Col5 nvarchar(50),
Col6 nvarchar(50),
Col7 nvarchar(50),
Col8 nvarchar(50)
GO
INSERT INTO zips
SELECT *
FROM OPENROWSET(BULK 'C:Documents and SettingstkruegerMy Documentsblogcenzuszipcodeszips.txt',
FORMATFILE='C:Documents and SettingstkruegerMy Documentsblogzip_format_file.txt'
) as t1 ;
GO
That was simple enough given the work on the format file that we already did. Bulk insert isn’t as fast as bcp but gives you some freedom from within TSQL and SSMS to add functionality to the import.
SSIS
Next is my favorite playground in SSIS
We can do many methods in SSIS to get data from point A, to point B. I’ll show you data flow task and the SSIS version of BULK INSERT
First create a new integrated services project.
Create a new flat file connection by right clicking the connection managers area. This will be used in both methods
Bulk insert
You can use format file here as well which is beneficial to moving methods around. This essentially is calling the same processes with format file usage. Drag over a bulk insert task and double click it to go into the editor.
Fill in the information starting with connection. This will populate much as the wizard did.
Example of format file usage
Or specify your own details
Execute this and again, we have some data
Data Flow method
Bring over a data flow task and double click it to go into the data flow tab.
Bring over a flat file source and SQL Server destination. Edit the flat file source to use the connection manager “The file” we already created. Connect the two once they are there
Double click the SQL Server Destination task to open the editor. Enter in the connection manager information and select the table to import into.
Go into the mappings and connect the dots per say
Typical issue of type conversions is Unicode to non-unicode.
We fix this with a Data conversion or explicit conversion in the editor. Data conversion tasks are usually the route I take. Drag over a data conversation task and place it between the connection from the flat file source to the SQL Server destination.
New look in the mappings
And after execution…
SqlBulkCopy Method
Sense we’re in the SSIS package we can use that awesome “script task” to show SlqBulkCopy. Not only fast but also handy for those really “unique” file formats we receive so often
Bring over a script task into the control flow
Double click the task and go to the script page. Click the Design script to open up the code behind
Ref.
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/ -
how do i convert from pdf to word using the trial package
Hi paddyg73,
Open the pdf in Acrobat and then go to 'File> Save As Other> Microsoft Word Document'
Regards,
Rave -
How do I convert an audio link into a wav file?
how do I convert an audio link into a wav file with my Imac?
A PC user showed me to right click an audio link where it asked if it wanted to save the link as a Wav file?
I saw this done in front of me. How do I do it with my Mac ?This is how to do it in itunes http://support.apple.com/kb/ht1550
If I view the song in finder, all that i have to do is press command-i and it opens a window. In the section where you view the name and extension I took off the extension (.mp3 in my case) and replaced it with .wav -
___ How do I convert an Ai logo to a .dst file for use in embroidery?
Is there an easy way?
Thanks,
HughLike so perhaps:
http://www.embroideryi2.com/adobe
Took 5 seconds to search on Google.
Mylenium -
How can I convert the volume directory into a single file installer?
How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.
On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you? -
I am new to Lightroom and have also just changed from Apple to PC. I cannot figure out how to download photos from the Photoshop library to a file that will be sent to MPIX for processing. Also, does Lightroom have an easy access to a photo processing capability such as MPIX?
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
How can I publish my flash movie in one swf file in V.2
Hi
When I publish my movie to flash format , skin swf file is
segregated from main movie swf file . How can I publish my movie
only in one swf file ? I want to merge skin and main movie files
together in one swf file .Hi Corona,
The screen size is whatever you captured or specified during
the recording or new movie setup process. This will cause the
playback control to be placed "on top of" some portion of the
captured background, but there are two ways around that problem.
1) When you set the red recording area before recording, drag
the bottom of the recording area downward about 35 pixels below the
application window (assuming you are capturing an area that
includes a "bottom" or even an application window - grin). For this
to work, it is best if you do your recording against a
solid-one-colored desktop background, so the "extra" area at the
bottom doesn't include desktop images that you don't want in the
capture (even though that area will not be visible in the end ...)
OR...
2) Use the Project > Resize Project dialog to increase the
palette size on the bottom, taking care to leave the original movie
the same size. This will effectively do the same thing as
Suggestion #1, create a "blank" area at the bottom of the movie on
which there is room to mount the playback control bar.
Best of luck, Corona, and omid02. Hope this helps, in
conjunction with the advice that Rick has already offered.
.
Maybe you are looking for
-
The copy and paste functions in iPhoto used to work in Snow Leopard, but not with the Lion. How do I copy and paste photos from one event to another? What I don't understand is that it used to work with Snow Leopard, and now that the OS has been up
-
How to assign transaction code to report group.
hi experts, i used report painter to create some reports and assign these reports to a report group, i want to assign a transaction code to the report group, how can i do that? hunger for your adivces, thanks a lot!!
-
Is there anyway to tie inventory to a specific date? I think of all of the businesses that offer products or services where their availability is limited on any given date, who could benefit from showing their availability in real time on their site
-
How to Edit Source File?
I understand, in the source file, my home page <title> says "home" nothing else. I've been told to change it to "Richard Lange - Artist" or something similar. Same idea for all my other pages since they are vital part of the search engines search pat
-
I updated my computer but there is no sound coming out
I updated my windows 7: HP Pavilion DV2-1209AX laptop's BIOS and now i have no sound. Is the upgrade defective? This question was solved. View Solution.