How do I convert from PAL to NTSC in compressor?

I have a project I converted from mp4 file to Apple Pro Res to edit it in FCP. I exported using Compressor and tried to import the files to DVD Studio Pro. It said it can't put PAL files into an NTSC project. I didn't even realize it was filmed in PAL (yes, I have the rights to use the footage). How do I convert the files from PAL to put it into FCP...in Compressor? If so, how? Thanks for any help!

To convert the 25fps PAL file to a 29.97fps file staying within the ProRes codec:
• Open up compressor. In the Settings window select: Apple>Formats>Quicktime>ProRes 422
• Select the "Duplicate Selected Setting" icon in the upper left of the Settings window
• This creates duplicate of the preset that you can edit
• Select the preset copy and, in Inspector, give it a new name (something like ProRes PAL>NTSC)
• In Encoder>Video Settings>Frame rate - and change the frame rate to 29.97
• In Frame Controls> turn them on and set Resize Filter and Rate Conversion to BETTER. (If so set them to BEST, be prepared for a long wait)
• In the Geometry tab, set the Frame Size to 720x480 (you don't say if the file is 16:9 or 4:3)
• Submit the file and go have dinner. Depending on the length of the file, it may take hours.
Have fun.
x

Similar Messages

How to convert from PAL to NTSC in compressor

I have a project I converted from mp4 file to Apple Pro Res to edit it in FCP. I exported using Compressor and tried to import the files to DVD Studio Pro. It said it can't put PAL files into an NTSC project. I didn't even realize it was filmed in PAL (yes, I have the rights to use the footage). How do I convert the files from PAL to put it into FCP...in Compressor? If so, how? Thanks for any help!

Since you've already edited it, export from fcp (file: export: quicktime movie - NOT quicktime conversion) with current settings. Bring this file into compressor and apply the appropriate dvd preset. Thencustomize the preset, changing the frame rate to 29.97 fps and video format to ntsc in the encoder panel: the pixel dimensions in the geometry panel to 720x480 (not sure if this is necessary, but doublecheck it). Then in the frame controls panel, enable frame controls and change the resize filter to best, and rate conversion to 100% of source and rate conversion to best. This may take a long time to output, so you might want to do a short test by setting an in and out in the compressor preview window.
Hopefully, I haven't left anything out. If there are any questions, post back.

Grainy Image when converting from PAL to NTSC...

Hi,
I'm using Compressor 2.0.1 to convert a PAL movie to NTSC. I find that the output is extremely Grainy, the blacs are Muddy and the Highlights are colored.
Any suggestions?
Thanks and Regards,
Rajnesh

There are many options when converting from PAL to NTSC with Compressor's Frame Controls panel. Have you tried other settings? Note, however, that the highest quality settings are pretty slow so be prepared for a fairly long wait even on your Power Mac G5.
Otherwise, you might want to try the freeware utility JES Deinterlacer (available on VersionTracker.com). JES Deinterlacer is pretty fast at PAL <-> NTSC conversion and the results are better than you will get with the basic settings in Compressor 2.

Convert from pal to ntsc

Hi folks does anyone know of a way to convert a project created in PAL into NTSC directly in FCP X, I need to produce to versions of the same project to DVD, the PAL version is straight forward export to DVD, but would appreciated any help in being able to do the same but for an NTSC version of teh same project
Thanks in advance

Make a new project. Use custom settings for NTSC. Copy the PAL project and paste it into the NTSC project.
Russ

When to convert from PAL to NTSC?

I want to convert PAL DV movies to NTSC DVDs. Should I do the PAL to NTSC conversion as I export the QT movie, which QT seems capable of, or should I drop the PAL QT movie into Compressor and do the conversion there? Any advise or reports of experience with this process would be appreciated.

Hi
As I know and try, first convert your movie to NTSC and then convert it to MPEG.
converting DV-PAL to MPEG-2 NTSC is taking too long.
good converting takes 1.2 hour to 1 min of video on G5 Dual 2.5GHz.
you can download my compressor droplets (compressor 2).
http://homepage.mac.com/tal_rom/FileSharing7.html
Tal

I want to convert a movie that I've created in iMovie from PAL to NTSC.

I've created a large movie using PAL but now want to convert it to NTSC to send to my family in Canada. It took ages to create. Is there an easy way of doing the conversion? I don't want to have to do it all again.

Hi
A. Using iMovie'08 to 11 - Will not give 100% result - as You want interlaced SD-Video = NTSC
B. Converting from PAL to NTSC - is Never 100% loss free - but You lose a bit
I use iMovie HD6 or FinalCut - as they can deliver 100% over to program that converts.
• iMovie and iDVD can convert - BUT RESULT WILL BE Very POOOOR.
My notes on How I do it
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on Internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on Internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

Converting subtitle file length from PAL to NTSC

We're releasing a PAL version of a movie in the UK, whilst another company in the US will issue an NTSC conversion from our PAL master. The NTSC master therefore will run exactly 3.8462% slower than the PAL 25fps master, after standards conversion and speed correction.
We'd like to be able to use our PAL spotted subtitle file for the NTSC release, but I need to know if it's possible to 'stretch' the subtitle file by the required 3.8462% in order for it to match the NTSC running time.
I have tried a shareware app called Subtitler (by exporting the track description file and importing into Subtitler), but it does not allow me to input a stretch as a percentage - merely in frames, seconds, minutes etc, which adds the same amount to each subtitle.
Does anybody out there know of a way to create the modifid subtitle file?

Yes, I have already converted the original supplied .txt file, but (and as with most subtitle files it seems) I have had to tweek it myself and add a whole load more subtitles (directly in DVD Studio Pro), which are translations from Chinese to English, which were not included in the original supplied French to English file (the film is set in China and has both French and Chinese throughout!). I have also created another separate Chinese to English file in DVD Studio Pro. So you see my dilemma...
If only Subtitler was more stable - It crashes every time I import the DVD Studio Pro Item Description file.
A friend converted the original supplied file from PAL to NTSC using the excellent (but PC only) Subtitle Workshop.
I have been in direct contact with the very helpful author of the shareware Subtitler app, and he is working on a revision to fix the bugs.

How to check the format (PAL or NTSC) of a DVD?

I wonder if someone can tell me how to check the format (PAL or NTSC) of DVD’s that I receive from my friends around the world. Many of them have no marking as to the format... Is there some software that can do this?

Hello Peace Freak,
have a look at myDVDedit (http://www.mydvdedit.com). It's actually designed to do postproduction on a DVD, but will also display a lot of info, such as TV standard, 16:9 vs. 4:3, etc.
Insert your DVD, then launch myDVDedit and open the VIDEO_TS folder contained in your DVD. Click the IFO tab to find the information you're looking for.
hope this helps
mish

What's the cleanest workflow from PAL to NTSC?

Hi. I'm shooting in Iceland and editing in the States. Can anyone make a recommendation about the cleanest workflow from PAL to NTSC? I'll be shooting with an HD camera. Thanks!

What kind of HD?
There are about 6 million flavors - some really are HD, others use the term more as a marketing gimmick.
Why not just hire a camera that shoots the format and frame rate that you will be editing with? Granted, it might be difficult to find a camera compatible with US standards in Iceland, after all there are only 320 000 people living there. Plenty of rental places in the US though.
The cleanest workflow from PAL to NTSC is by using facility with a hardware converter such as those from Teranex or Snell & Wilcox. You will get a professional standards conversion engineer thrown in but the price will far outweigh what you will pay to hire a camera.
Other options, depending on what kind of quality is acceptable to you:
Compressor - You already have it. Will give you very good results but take a long time to process.
Natress Standards Conversion: $100. Will give you very good results but take a long time to process.
JES Deinterlacer: Free. Will give you decent results but take a long time to process.

Transcoding clip from PAL to NTSC

Hi, just my second discussion post so sorry if this question has been answered a zillion times before.
I need to buy a short stock footage clip that was shot in PAL DV (Standard Definition) at 720 x 576 @ 25 frames per second. I want to transcode to NTSC DV 720 x 480 @ 29.97 fps in PE 4 (by importing into a project and rendering it). Then I will use that transcoded clip in my project.
Before I buy this clip, I thought I'd ask if I can expect reasonable quality or if there are any things to watch out for. I'm assuming I can do what I describe above.
Thanks!
Steve

The conversion from PAL to NTSC can be a tough one, even with professional level software, Steve. As you indicated, it means not only changing the frame size (and pixel dimension) but also changing the frame rate -- which can often result in jiggliness.
Although officially possible, it's usually a pretty ugly transition. I don't know how much you're paying for this piece, but it might be worth challenging your provider to give it to you in acceptable NTSC format before you lay out the money.

How do I convert from a pdf to a word document?

How do I convert from a pdf to a word document?

Hi SGU,
There are 2 Ways to do this ...
1. Either Use Adobe Export PDF Service .. Please Refer : https://www.acrobat.com/exportpdf/en_GB/convert-pdf-to-word.html
2. Use Adobe Acrobat to do it ... Refer : http://www.adobe.com/products/acrobat/pdf-to-word-doc-converter.html

How do I convert from PDF to Word step by step instructions needed..am practically computer illiterate

How do I convert from PDF to Word step by step instructions needed..am practically computer illiterate@

Ok, fine. That isn't Acrobat, and that's why our instructions weren't much use. (But it's worth saying "I didn't have that option" rather than "it's not converting", we could end up wasting a lot of your time with the wrong stuff!)
Anyway, the free Adobe Reader can't do this conversion without a subscription called either ExportPDF or PDF Pack. You may have had one in the past. Are you still paying for one?

How do I convert from imovie to wmv format

how do I convert from imovie to wmv format

Spend some money at http://flip4mac.com and then do some homework regarding exports from iMovie to QuickTime formats.
Then spend some more money to buy the Pro upgrade to QuickTime Player 7 so you can use this third party software (not supported by the newer versions of iMovie).

How do I convert from PDF to jpeg.

How do i convert from pdf to jpeg

Hi michaelw55080095,
I'm sorry this is so frustrating for you. It's certainly not meant to be! Please log out, and clear the browser cache. Then log back in to https://cloud.acrobat.com.
If you're still having trouble, let me know.
Best,
Sara

Changing an existing DVD from PAL to NTSC

I have just created, and burned, a DVD in iDVD 7.0.4 in my default setting of PAL.
Now I want to print one in NTSC format. I went to Project Information and changed the setting from PAL to NTSC, read the warning given that it would rerender my assets, and clicked OK. I waited for something to happen, and when nothing did, I tried to burn the DVD, assuming it had changed what was necessary. I got the message 'You are burning a PAL movie to an NTSC disc. Do you want to proceed?' I'm using the same discs I always do: DVD-R. I've made no change. Can anyone help, please? I'm on an iMac running Snow Leopard. Many thanks.

Thank you! In desperation, I tried just that. I opened a new iDVD project, set it for NTSC, and imported the movie I wanted to burn from iMovie (where I made it in the first place). I've just burned the new disc and I can't view it on my screen - which is promising. Does this tell me that it's worked - that I've produced an NTSC video??!

How do I convert from PAL to NTSC in compressor?

Similar Messages

Maybe you are looking for