How do I copy and paste an image form the internet to Keynote. I have done this successfully in the past by selecting copy and then paste by using the right click function and now am unable to do so. I am thinking it is an outdate OS problem...not sure.

How do I copy and paste an image from the internet to Keynote. I have done so successfully in the paste by using the copy and paste right click functions but am unable to do so now. That was about a year ago that I attempted that I was able to do this. Thank you for your help.

Some images are copy-protected.
If all else fails, you can make a screen shot of the image: 
With the image visible in your browser, press CMD-Shift-4 and your cursor will change to crosshairs.
Position the cross hairs at one of the corners of what you want to copy and drag to the opposite corner, then release the mouse. An copy of the image will be saved to your desktop.
You can now edit and use this image.
Be sure to respect copyrights.
Message was edited by: bwfromspring hill

Similar Messages

  • HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  Any clues?

    I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly.  That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse.  I only have a previous version re-install disc as I bought the latest OSX off the app store.  Any help gratefully received?

    Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    If that doesn't help Reinstall the OS.

  • Downloaded 3.6.13 today and now I can not use my right click function when trying to open a new tab!

    When browsing the net I can not use my right click function on a link to open a new tab. How can I fix this? It was working fine until I downloaded 3.6.13 Firefox this am.

    I un-installed the yahoo toolbar and my problem was solved!!!!

  • The right click function has stopped working on by trackpad

    The right click function has stoped working?  any idea how to remediate?

    It could be as simple as not having the two-finger secondary click function enabled in the Trackpad seetings in System Preferences.
    Does Control-Click work? (holding the CONTROL key, while clicking)

  • I can't use the right-click function on websites (i.e. Yahoo! Mail) because Firefox's context menu is in the way. How can I fix this?

    I can't use the right-click function on websites (i.e. Yahoo! Mail) because Firefox's context menu is in the way.

    Tools > Options > Content : JavaScript > Advanced > Allow Scripts to: [X] "Disable or replace context menus"

  • Hello,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    ****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
    http://www.apple.com/support/systemstatus/

  • I have recently re-built my PC and downloaded Firefox again. I have appeared to have done this successfully, but the desktop icon refuses to work. I have tried opening firefox from everywhere on my pc. Do i need to turn on anything to get this to work?

    Other info....My OS is windows Vista. I can give you full spec of PC, however not sure that will help here. The desk top icon that appears after downloading Firefox 5 appears to be dead when i double click it. I do not get an egg timer or anything. I have tried to access this through programme files but it does the same.

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • Installed snow leopard and the right click on my mouse no longer works. Any ideas?

    I just replaced my hard drive and installed a clean copy snow leopard with all updates. The right mouse button (normal wired mouse that came with imac) with the menu drop down is no longer working. changed secondary button in mouse settings and got the right click menu but now when I right click the file or group of files are no longer highlighted. this *****. any ideas?? Between the hassle of replacing a hard drive, mouse problems, firefox, opera, office mac and elgato tv problems and issues im fed up.
    Message was edited by: tele59

    Apple menu -> System preferences -> Keyboard and Mouse should give you controls over the mouse. If not, either Steer Mouse or USB Overdrive might give you better control.

  • Mouse right-click function doesn't work in Bookmarks (Mac)

    I recently switched from PCs to Macs. No problem downloading Firefox and transferring old bookmarks and other settings, with one exception. With the PCs, when I right-clicked a particular bookmark under Bookmarks I got a series of 12 options (from Open, Open in New Window to Delete, Sort by Name, Properties). I used these a lot to delete bookmarks, change names, alphabetize lists, etc. I can now do most of these things under the Manage Bookmarks setting, but when I right click bookmarks now the new bookmark I click on just replaces the one on screen (ie, the right click does exactly what the left click does). I am using two different mice (Apple Mighty Mouse with Leopard, Microsoft Wheel Mouse with Tiger) and the right click function behaves as expected in other programs. Are these mouse right click Bookmark functions supposed to appear with the Firefox for Mac? If so, any ideas how to resolve my problem?

    Can someone explain to me why it's possible in Chrome on Mac, but not on Firefox? This is my 2nd biggest complaint about FF on the Mac, only surpassed by missing favicons in bookmarks. Chrome does both very well.

  • Right click functionality

    Which software can best replace the right click funtionality
    of Authorware.

    Hi Puneet2401,
    I think you basically want to disable the end user personalization for a particular WD for java application.
    I can see that there are some other answers also in this thread which are rather about the right click functionality, but let me try to answer the original question.
    1.Log-in to the portal with administrator user id.
    2.Go to portal content which is under the Portal Content administration
    Example on 720: http://<host>:<port>/irj/portal --> Portal Content --> Content Provided by SAP --> Templates --> iView Templates --> AppPropertiesApp
    3. Right click on the application and choose "Properties".
    4. Open the application by clicking the button "Preview". The application is now opened in a separate browser.
    5.Press CTRL+Right click on any UI elements on the screen.
    a.This will open the admin personalization popup in 700,
    b. As of 710 and Higher a context menu appears, choose the menu entry "Settings for Current Role..."  which will open admin personalization.
    6. Notice the checkbox on the very bottom of this popup window which calls "Disable end user customizazion for this iview".
    I've attached a document for you where you can see the exact steps (I hope there will be no problem with the upload, nowadays I had some problem with it, but if it is not working, you can follow the above steps)
    Best Regards,
    Ervin

  • Issues with the "right click" window not going away, unable to web browse

    Out of the blue, and at least 3-4 times a day, the "right click" pop up window will appear while I am web browsing, if I try to move the mouse , the window will continue to appear until I have to re boot.. Also, while it does this, sometimes it will make my screen pan in and out while moving the mouse.. Any ideas why this happens.. It's becoming quite annoying. BTW my browser is fire fox, and I have reinstalled it but it has not helped.
    Thanks

    Actually... thinking about it... it sounds like a sticky ctrl key on your keyboard
    The zooming in and out is when you hold ctrl and move the scroll ball
    the "right click" function (as on macs of old) is activated when ctrl+click-ing...
    Have a look around your keyboard, maby try another, see if the problem persists

  • The right-click mouse function stopped working, only on firefox.

    After using the right click on a link to open link in a new tab, the right click function disappears, I have 2 arrows one at the top of the menu, one at the bottom, up and down ^ (theres none for down) :P
    Anywho, its kinda frustrating, it always happens, and only on firefox, I thought if I upgraded to the new version it would fix it, but it hasn't been happening about a week. Will come back for 2 clicks if I fully exit mozilla, but its frustrating!
    Thank christ for ctrl + C and cntrl + V !!
    Please help!

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Right-click functionality has stopped working

    Hi everyone, I'm having issues with the right-click functionality in my Captivate project.
    I have:
    Turned off accessibility
    Set the Global Security settings so that the files I'm referring to are in a trusted location
    Here's the problem - the files I have are sitting on a shared drive. The users and I all have the same versions of Flash Player and Internet Explorer, and we all have our Global Security Settings set to trust the location (because we've put the settings into the environment so it always applies). The issue is, the right-click works for me, but it doesn't work for my users. The only difference is, I have the Adobe Captivate and Flash software installed (hence have the Flash Player that is installed when they are installed) and my users don't.
    Can you please help me? Are there any areas we should be looking at?

    It could be as simple as not having the two-finger secondary click function enabled in the Trackpad seetings in System Preferences.
    Does Control-Click work? (holding the CONTROL key, while clicking)

  • Where do i set right click functionality for trackpad?

    i just got my macbookpro back from the shop and the right click functionality is not working.
    can someone remind me where is set the right click functionality for trackpad?
    google is giving me wormholes when i try and search on this.
    TIA

    ok. found it in one of the little tiny arrow pulldowns for second something or other in trackpad preferences.

  • Right-Click Functionality - Heinz Article

    Greetings:
    I'm finally faced with the right-click functionality issue in
    Captivate. I'm using Captivate 2.
    I have done my due diligence and I understand why I get the
    Flash Player settings when I right-click in a simulation
    (interactive simulations only, a pure demonstration works fine).
    And, I have located and read the William Heinz article titled
    'Using Animations to Extend Adobe Captivate for Right-Click
    Capability'. This article can be found in the Captivate support
    section, along with another one (more complicated, it seems) by
    Steven Shongrunden.
    Here's the URL to the Heinz article:
    http://www.adobe.com/devnet/captivate/articles/rightclick.html
    Everything was going well with the Heinz technique until I
    reached step 5 on page 2 of the article. This is where the
    animation is inserted onto the slide. For sub-step d, sub-sub-step
    iii, it says to "Select the Pause until User Clicks option" in the
    Animation dialog box. However, I do not have a Pause until User
    Clicks option in my Animation dialog box.
    So, is that an option only available for the Animation dialog
    box in Captivate 3? If so, then the opening paragraph of this
    article is incorrect in stating that this technique works for
    Captivate 2.
    Or, have I just misread something in this article?
    Thanks in advance for any help with this!

    Hi Jim
    If the article needs improvement, by all means you should
    report it so it may be corrected. Perhaps use the Wish Form?
    Click
    here.
    Or if you would like to post here where it is vague, I'll be
    happy to feed it back through some other channels I have.
    Cheers... Rick

Maybe you are looking for

  • Open vi reference error

    Hi all, I am using LabVIEW 2011 SP1. I am running such a vi which is calling another vi by selecting a boolean button. After opening the new vi, the previous vi will stay opened but being minimized and the new vi will stay maximized untill user force

  • Seriuos problem with myfaces

    I have a menu with item and subitem. If a click more that once in the same request on the links of menu, application starts to have an incorrect behaviour and everything can happen! Some menu items are lost, and if I go on application stop to answer

  • Raise Business Events based on condition.

    Hi, Is there a way to raise a Seeded Business event(oracle.apps.jtf.cac.task.updateTask) based on a condition. I want to raise the business event only if there is a update on a certain type of records( if attribute1 is not null or something like that

  • Bluray disc not recognised on HP Touchsmart IQ525UK, using Windows 7.

    I recently bought myself the above PC, & paid the extra £22 to get the upgrade to Windows 7.  I've now bought my first bluray disc, but when i put it into the drive, nothing happens. the drive doesn't even appear to 'see' it.  I didn't have the disc

  • By Reference OO Desing

    Hello! I am looking for some documentation with examples about Labview by Value and by Reference OO Design. Mostly, I interested in by Ref. OO Desing. So I would be greatfuly If you could send me some useful links, examples. Thank you! +++ In God we