How do I copy editted clips from one project file to another?

I am working on a project. At one point, before I finished I "saved as" with another name to give me a backup. After working on it for a while I found that a section of the video had gotten out of place (a lot of clips and layers). I would like to copy this portion from the other project file I had saved. I can't figure it out. Both projects have the same clips in the project bins. I am using Premiere 6.5, with a Pinnacle DV500 DVD capture card. My computer is a duel P3 800, 512RAM, 40Gig Sys. drive and 480 Gig RAID 0. Please Help!

Throw away everything you don't want to copy, save as a new project, import the new project into the other one.

Similar Messages

  • How do I copy a clip from one project to another

    Hello
    I want to use some portions of a clip that I have modifyed to another new project. I tried with copy/past, but they are not transfered to the new project.
    Thanks anticipated
    Roberto

    This is Photoshop Elements forum for image editing. You need to post the issue in Premiere Elements forum here - http://forums.adobe.com/community/premiere_elements so you can get more accurate feedback.
    Thanks,
    Garry

  • How can I copy the layer from one .PSD file to another .PSD file?

    Hi,
    Actually it is shape and mask on one layer which I want to use it on my Photoshop CS4 file. If I select all the layer and copy it to my file it just copies the shape but not the mask. How can I copy MASK to my file?
    Please do hlep.
    Actually I am trying to copy the following layer.

    I believe the fastest way would be to duplicate the layer and send it to the other document. Open both images. Click the document tab of the document with the shape layer. With the shape layer selected in the layers palette, right click where it says the shape layer name. Select "duplicate layer" from the context menu. In the dialog that comes up, select the document you want to copy that layer to in the destination box then press ok.
    Alternately, you can open both images then pull the document frame tabs down to open both images in your workspace. Grab the shape layer in the document's layers palette by left clicking it...keep the left button pressed (hand icon should be a grab icon). While left button is still pressed, drag the shape layer over the receiving document. To make the shape layer register in the same location, press the shift key and keep it pressed. Release left mouse button while the layer is over the receiving document. Release shift key after you have released the left mouse button.
    This tutorial has a good photo reference for what I mean when I say pull the image tabs down so both documents appear in the same workspace...also shows drag/drop:
    http://www.photoshopcstutorials.co.uk/html/cs4_workspace___palette_notes.html

  • How do I transfer a clip from one project to another?

    How do I transfer a clip from one project to another?
    [Title edited to remove personal information... Mod]
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]

    Gene
    Thanks for the reply.
    For now assuming that you are using Premiere Elements 11, 12/12.1, or 13/13.1 on Windows 7, 8, or 8.1 64 bit....
    I am not sure that Left and Right channel audio editing is the answer to your DVD echo issue, but the opportunities for audio channel editing in Premiere Elements would include (before burn to)
    1. Audio Mixer - Balance.
    2. fx Effects/Audio Effects
    Please refer to https://helpx.adobe.com/premiere-elements/using/effects-reference.html#audio_effects
    for explanations of the Audio Effects.....
    Balance
    Channel Volume
    Left Fill, Right Fill
    Invert
    Swap Channels
    And, there is the free audio editor, Audacity Audacity: Free Audio Editor and Recorder for channel editing.
    Do you hear the echo before the burn to disc?
    Is any of the Timeline video content from your cell phone? If so, did you have any issues with a variable frame rate when you were preparing the video in Edit area for burn to in Publish+Share?
    What audio effects, if any, did you apply to the Timeline audio content prior to burn to?
    Please consider.
    ATR

  • How do I copy a page from one pdf  document to another?

    I am a newbe!

    That was easy.Thank you.
         Re: How do I copy a page from one pdf document to another?
    created by George Johnson in Creating, Editing & Exporting PDFs - View the full discussion
    If you open both documents, you can drag a page from the Pages panel (on the left of the window) of one document and drop it into the Pages panel of another.
    You can also extract one or more pages from a document to create a new document, and then insert the pages from this new document into another. In Acrobat 11 you 'd do this by doing:
    Tools > Pages > Extract
    and then:
    Tools > Pages > Insert from File
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6163925#6163925
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6163925#6163925
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6163925#6163925. In the Actions box on the right, click the Stop Email Notifications link .
    Start a new discussion in Creating, Editing & Exporting PDFs at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 .

  • I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found

    I am having problems copying and pasting clips from one project timeline to another. When I do this they often alter in length. Sometimes by two frames. Other times they lose a chunk off the end of the last clip in the sequence. Has anyone else found this?

    You need to give a lot more information about the media specifications and the project properties you're using in the different projects.

  • How do i select a clip from one project and enter it into another?

    how do I select a clip from one project and enter it in another?

    This doesn't seem to relate to Adobe Reader. Please let us know the product you are using so we may redirect you or refer to the list of forums at http://forums.adobe.com/

  • How do i move a picture from one pdf-file to another already created pdf-file with adobe reader?

    How do I move a picture from one pdf-file to another, already created pdf-file, with adobe reader?

    Reader doesn't have editing capabilities.

  • How do I copy an image from one Keynote presentation to another one?

    I have a previously saved presentation on Keynote in iCloud. I created it from my desktop at work. Some of the images I used for the presentation I want to use again in another presentation, onlh this time I am working off my laptop and don't have the same access to those images. Is it possible to copy/paste images from one Keynote presentation into another? I can't even seem to click on the image and save it.
    Any suggestions?

    Clicking and dragging does not work.
    Click on the image and Copy and Paste
    or
    Inspector > Metrics > File Info > click on the icon of the file and drag it to your desktop
    You can then drag that file back in wherever you want.
    Peter

  • How do I transfer EDITED clips from one IMovie to another

    I have tried to transfer edited clips (with original sound) from one IMovie to another. However, the system transfered the original clips instead of the edited clips.
    Does anyone have any tips on how to transfer the edited clips only and not the original clips.
    osx 10.3.9 and Imovie 5.0.2

    That will copy the original, imported material, not
    the edited version. I.e. if I trim an imported clip,
    the .mov file will still be the un-trimmed,
    full-length clip.
    Not the movie Lennart means. The movie Lennart refers to — called the Timeline Movie.mov and located in the Cache folder inside the project — plays the edited Timeline of Project A. (It's a reference movie containing pointers to the audio and video files in the Media folder.) When that Timeline Movie is imported to Project B, it delivers all the edited video and audio of Project A as a single clip to Project B. (He's not referring to the video and audio files in the Media folder, which I think you mean.)
    taronger, if all you want is a single clip, another way is to select the clip in the iMovie Timeline and export it to a Full Quality movie. Be sure to turn on the checkbox "Share selected clips only" in the export dialog window. Later, import that exported movie to another project.
    I did some trials and found out that transfering edited clips (not original clips) can be done by selecting several consecutive clips in the original movie, and using the copy command. It is then possible to go to the new movie and use the paste command to transfer the edited clips.
    Yes, that delivers the clips, but it doesn't deliver shortened clips. It delivers the entire source file of the clip. So if Clip 2 is 5 seconds long but its source file is 3 minutes long you get the entire 3 minute source file.
    It's sometimes easiest to export the clips you want from Project A back to the camera, then re-import them to Project B. That accomplishes everything you want, delivering the edited material trimmed to the shortest length possible.
    Note that the clips must stand shoulder-to-shoulder on the Timeline and the "Share selected clips only" checkbox must be checked. (Some versions of iMovie fail to stop the export to the camera at the end of the last clip. You may have to stop it manually.)
    Karl

  • How do I copy a page from one Pages document to another using Pages 5.0?

    I posted this question on another page, and haven't recieved an answer to it yet. However I have found a temporary solution, so I am posting this here in case anyone else has a similar problem.
    The issue here is that I have just upgraded from Snow Leopard to Maverick (10.9.1), and my Pages also upgraded (to 5.0.1), altering my Pages documents. This is the issue, as as far as I can see the new Pages does not offer some of the basic needs that the old Pages did! In other words it is worse than the previous version.
    Using the upgraded new Pages 5.0.1 seems to result in some major editing problems for me. If you upgrade, make sure you KEEP the old version of Pages 09 (v 4.3). That is what has saved me!  If you have the same problems I have had - explained below, you will still be able to close the new version and open your Pages document in the old version, provided it is not a new Pages document. If it is, it will be possible to export it as a Pages 09 document and edit properly.
    After upgrading to the new Pages 5.0.1, when I open documents in Pages and try and copy a section from one document to another (easy before using the thumbnails) many of the Menu items previously available are visible but appear faded and are not possible, including Insert>Section Break/Page Break/Page Number and Edit>Cut/Copy/Delete/Undo/Redo
    This even happens if I duplicate the Pages document and try and do any of these from the Duplicate (which should be an easily editable copy).
    My solution has been to simply open all Pages documents that Iwant to edit (or may want to edit in future) in the old Pages app (v 4.3), which I never got rid of. That has meant I can continue editing and copying a section (of 1 or more pages) from one Pages document to another.
    If anyone reading this has figured out a way to edit Pages documents using the new version 5.0.1 please post an explanation, and I will try it!

    And there are those who don't like me repeating the same message over and over again in this forum!
    Apple has removed over 90 features from Pages 5.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder.
    Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
    Peter

  • --Any way to copy/paste clips from one project to another w/o LOSING TRANSITIONS...??

    I have CS5...
    I'm trying to speed up render/export time. I have multiple edited video's in about 15 different projects.
    I had a couple video's within one project and rendered the work area - consisting of 4 video's...then exported. It was much faster than just going to straight exporting so I wanted to do the same with all the other video's.
    Pull everything into one project - render first - and export from there but premiere doesn't copy transitions from one project to another. Is there any way to get it to copy/paste transitions??
    Thanks

    exported regularly and took 2hrs 50min's for each video....then rendered and exported - took prob around 2hrs total - including rendering/exporting.
    That seems unlikely.  If anything, the separate render/export should take slightly longer (though not that much) as you may also have to transcode the preview files (depending on your preview codec) during the render, as well as decode them for the export.  Besides adding an additional layer of compression, it also adds time.  Here's what I mean.
    Export only:
    1. Decode original media
    2. Render new frame based on sequence, effects, titles, etc.
    3. Transcode that new frame to the export codec of choice.
    Render (1-3) /Export (4-5)
    1. Decode original media.
    2. Render new frame based on sequence, effects, titles, etc.
    3. Transcode that new frame to the Preview codec (if anything less than Uncompressed, this adds time and potentially degrades quality)
    4.  Decode the rendered frame (if not Uncompressed, which adds time)
    5. Transcode that (decoded) render frame to the export codec of choice.
    So you see, the render first process has two extra steps which add time, one of which could also introduce additional artifacts (depending on your preview codec).

  • How do I copy iphoto libraries from one external drive to another?

    Two of three of my iPhoto's libraries could not be upgraded to Mavericks because there was not enough room on a partitioned external drive. How do I copy them to a larger external drive? ( Iphoto 11)

    Drag them there. The volume they’re put onto needs to be formatted as Mac OS Extended.
    (111592)

  • How can I control a button from one swf file to another swf file?

    Hi,
    I have a main.swf file. From that file I am accessing the external.swf file which is an external file.
    Now, how can I write code on my main.swf file for the button which is on my external.swf file?
    Activities.MainPanel.close_btn.addEventListener(MouseEvent.CLICK, btnClickClose);
    Activities.MainPanel.close_btn (This buttons is actually on external.swf file, but I want to write code on main.swf file to execute it on external.swf) how can I control one swf button on other swf file?
    Thanks.

    Here's some example code that you should be able to adapt to your needs.
    // create a new loader object instance...
    var loader:Loader = new Loader();
    // make the download request...
    var request:URLRequest = new URLRequest("external.swf");
    // add a complete event listener to the loader
    loader.contentLoaderInfo.addEventListener(Event.COMPLETE, completeHandler);
    // start the actual loading process...
    loader.load(request);
    // create a new empty movieClip instance, you will put the loaded movie into this movieClip once its loaded
    var externalMovie:MovieClip;
    // this function is called when the download has finished and the file is ready to use...
    function completeHandler(event:Event):void {
       // set the contents of the loaded movie to the new empty movieClip...
               externalMovie = MovieClip(event.target.content);
       // add this new movie to the display list...
       addChild(externalMovie);
    Now you can refer to the loaded movie with the instance name "externalMovie". So if, for instance, you want to address a button in the loaded movie, you could write something like this on the main timeline:
    externalMovie.addEventListener(MouseEvent.CLICK, btnClickClose);
    function btnClickClose(event:MouseEvent):void {

  • How do I import several layers from one Illustrator file into another Illustrator file?

    Hi!
    I have ten Illustrator documents with appr. 100 layers in each document.
    Each layer in all documents are named correctly for automatic script exporting to PNG files.
    Now I want to import all layers from all ten documents into one master file. And importantly, I want to keep the exact names of each layer.
    Thank you for any help on this!
    David

    Layers Palette flyout >> Paste remebers layers (Enable)
    Now when you paste the layer names will come over.

Maybe you are looking for