How do I copy my library from an external drive to my computer without bringing all of my music just the library?

I have 137,000 songs on an external harddrive.  I just loaded them all into Itunes on a new computer and took the time to sort through all of them and remove duplicates and correct artists ect to have it all sort well.  I narrowed it down to 20,000 songs.  Now I figured out the Itunes library with 20,000 songs is still on my harddrive and is just pulling the 20,000 from the 137,000 songs available.  How do I copy just the 20,000 in my library onto the hard drive on my computer.  I want to upload these into "Cloud" but want to keep them separate from the rest of the music?  Does anyone know how to do this?
Thanks

Designate a new iTunes Media folder outside of the current folder structure and consolidate the 20,000 files to that location.
I don't have iCloud but I presume it counts the files in your library. If so you may not need to do anything at all, assuming you've eliminated the other entries from the library, but the method above will let you create one clean folder with your keepers.
tt2

Similar Messages

  • How do I copy iphoto libraries from one external drive to another?

    Two of three of my iPhoto's libraries could not be upgraded to Mavericks because there was not enough room on a partitioned external drive. How do I copy them to a larger external drive? ( Iphoto 11)

    Drag them there. The volume they’re put onto needs to be formatted as Mac OS Extended.
    (111592)

  • How do I copy my files from an external drive to my new computer

    I had all my music files on my old laptop whose motherboard burned out. I removed the hard drive, and would like to copy my old music files from my old hard drive to the internal hard drive in my new computer. I think I can do this one file at a time but there are like 4000 files so that is impossible

    File -> Add folder to library.
    Select the topmost folder with the music

  • Hi How can I copy my photos from my iPhone 5 to my computer?

    Hi How can I copy my photos from my iPhone 5 to my computer?

    Assuming they are photos taken with the iP5, just like you would with any digital camera... http://support.apple.com/kb/HT4083

  • How do i copy my files from my external hard drive onto my imac

    how do i copy my files from my external hard drive onto my imac

    You should be able to 'migrate them' without having to do so during a reinstall, from an external drive. In some cases, you may be able to use TimeMachine software even if the drive had not been used as a backup.
    The usual way, though, is to drag & drop copy from one to another (volume or folder) you created in there and have open. Or drag an item on top of the icon of a hard disk drive when it is mounted on the desktop. I'm used to working with open folders and windows, because that works best; and then see if I want to change how things look inside their destination. This helps should I later want to burn them to a DVD and have it correct. And I want to know where they are.
    I had more links to some information about importing or migrating data into a Mac from an external, a week ago, but can't find them now. A few good links to pages, but I think I posted what I did find directly to answer someones question about it; and believe the info was in an Apple Support article about TimeMachine, near the lower part of the page with blue words with a disclosure triangle, so you could read more in that page. But I don't believe these two are correct in that TimeMachine (some versions) only allow wireless backup to a drive in a base station unit such as Apple sells, for this. The link I saw simply said how to work around not using the wireless stuff. Maybe it was a dated item, not in these?
    See a main general portal to TimeMachine support,
    here: http://www.apple.com/support/timemachine/
    Or basics that may not provide optional copy methods:
    Mac Basics - Time Machine backs up your mac:
    http://support.apple.com/kb/ht1427
    Perhaps a search of Apple Support database (or even ASC discussions?) would yield ideas, and perhaps find what may work for the kind of files you want to copy, and where they can be found & used later. Are the files for specific applications? Or images, music, etc?
    Good luck & happy computing!
    edited.

  • How do i move a file from one external drive to another

    This is my first Mac computer and I have no idea how to move/copy a file from one external hard drive to another? It won't let me drag and drop from one Finder window to another and there is no copy/paste option on the left mouse click.

    mediamagnate03 wrote:
    This is my first Mac computer and I have no idea how to move/copy a file from one external hard drive to another? It won't let me drag and drop from one Finder window to another and there is no copy/paste option on the left mouse click.
    That is because it is on the Right Click, and the menu.

  • How do I Retrieve imovie projects from and external drive back into my mac internal drive

    How do I Retrieve imovie projects from and external drive back into my mac internal drive?
    Thank You

    Every working drive, Internal or External, should produce an Icon on your Desktop. If you cannot see those, click on the Desktop (to get Finder) and choose Preferences off the Finder Menu. The general pane has checkboxes for "Show these items on the Desktop:"
    Double click the Icon for your External Drive to open it. Open the folders on it until you find the Items you want to copy. Drag them to the Icon of your Internal Drive, or open the folder where you want them to land and drop them in there.
    A drive that does not appear on the desktop after you have asked it to may be damaged. But it would be smart to do a Restart to see if it is recognized again at next Startup.

  • How to open older version of iPhoto from an external drive. It won't let me open or upgrade to the latest version?

    How to open older version of iPhoto from an external drive. It won't let me open or upgrade to the latest version?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what fixes have you tried?
    how is the EHD where the library is located formatted?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

  • My old computer with all of my pictures and music that I didn't buy on iTunes got stolen. How can I transfer my media from my iPhone to my new computer without losing it?

    My old computer with all of my pictures and music that I didn't buy on iTunes got stolen. How can I transfer my media from my iPhone to my new computer without losing it?

    Third-party software, like this:
    http://www.wideanglesoftware.com/touchcopy/index.php

  • How to play/copy a movie from a usb drive in itunes

    How do I play/copy a movie from a usb drive in itunes?

    Right-click the file icon and choose Open With > iTunes.  If the file is compatible, it will start playing.

  • IMac is not booting - How can I copy my files to an external drive

    Hello,
    my iMac (late 2009 model, OS X 10.7.4) is not booting anymore. The iMac stopps booting at the Apple logo and the spinning gear.
    I tried a couple of things that I found here in the community but nothing worked.
    start in safe mode => iMac shuts off after a couple of seconds
    start with safe boot (Shift-Command-V) => I'll get a couple of error messages, e.g. disk0s2: I/O error.   SATA WARNING: Enable Drive PHY PM failed
    reset the NVRAM/PRAM => no change
    But when I try to get access on the HD with the FireWire Target Disk Mode, I can see the following folders: Applications, Library, System, Users. But the statusbar shows 0 items for each folder and it shows that the HD has 650 GB available. I have the original 1TB HD. When I try to start OS X from an external drive I can see the same folders. I tried Data Rescue 3 to scan my files, but the software stopps with an error.
    My TimeMachine backup was not working, so I have no actual backup and need to find a solution to copy my files to an external drive.
    Instead of Data Rescue 3, I can use TechTools Pro 6 alternatively.
    Would Data Rescue 3 find files if I erase and create a new partition on the HD?
    What I found out so far, it looks like a corrupted file system.
    Have anyone an idea or a tip, how I can copy my files?
    I would be more than happy if someone can help me.
    Thank you very much for all answers in advance.

    The internal drive is failing, or has failed. You may not be able to save the data.
    There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
    1. Boot into Recovery (command-R at startup) or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • How to move Startup Disk clone from one external drive to another?

    I thought this would be a question easily answered on the WWW and easily found via search engines, but so far no luck, hence this question.
    Prior to upgrading from Lion to Mountain Lion I followed some very good instructions from Tom Nelson on ask.com (http://macs.about.com/od/backupsarchives/ss/diskbackup.htm) related to using Disk Utility to clone my internal Macintosh HD drive to an external hard drive, making it a bootable drive.  I cloned to a very nice LaCie external FW drive that had far more room than that needed for the clone.  This drive booted just fine as a startup disk, so mission accomplished:   I have now a bootable clone of my Lion system prior to upgrading to Mountain Lion. 
    The upgrade to Mountain Lion went well, and now, before I put any additional apps or much additional data on the original internal  Macintosh HD drive, I want to use Disk Utility again to clone the drive so I'll have a snapshot of the system right after the upgrade to Mountain Lion.
    Questions: 
    Is there any way to use the same LaCie drive that now holds the Lion startup disk clone to hold the yet-to-be-done Mountain Lion startup disk clone?  
    If not, how can I move the Lion startup disk clone from the oversized LaCie external drive to a drive more the size of the Lion clone (approx 140G)?   The LaCie drive is far too roomy and nice to have sitting gathering dust for only 140G to be used in an emergency restore. 
    Thanks in advance for your advice.

    Good info Csound1, and thanks. 
    So my final question (I think):  How does one move/copy a startup disk clone from one external drive to another, and still have it bootable on the new external drive?   I'm still considering freeing this LaCie drive up for more dynamic storage and getting another drive for the bootable startup disk clones IF I can move this Lion startup disk clone to a new external drive. 
    I guess the summary question is:   how does one clone a startup disk clone?  As I think about this, and recall the Disk Utility screens, couldn't I simply select the Lion clone on the LaCie FW external drive and do the same operation I did with the original internal Lion drive?  Basically the same steps as before but this time the source is the LaCie FW external and the destination is a new external drive? 
    Thanks again; wonderful forum here with very smart people.  

  • How do I transfer my apps from an external drive to my new iMac?

    I just purchased a new iMac and am currently in the process of getting everything set up. My previous Mac was a powerbook, so there are many changes that I will be getting used to in the near future.
    My primary concern at the moment is getting my apps into my new iMac iTunes library. I have all my music, apps, podcasts, etc. saved on an external drive which I plugged into my new iMac. To import the music into iTunes. I selected File > Add to Library > then selected the external drive with my iTunes folder & imported the enitre folder (which was 163.57 GB). Everything, including my music, movies, podcasts, books, & TV shows transfered over just fine with the exception of my apps. After researching the issue, I discovered the iTunes was saving all the apps on my powerbook instead of the external drive in a folder titled Mobile Applications. I then transfered the folder from my powerbook to the external drive and followed the steps above to try and import my apps into my new iMac library. But have had no luck. Each app comes up with the following message when I try to add it to the iMac library:
    The app "[adult swim]" could not be added to your library because an error occured. An unknown error occurred (-50).
    This is as far as I have been able to get. I am ensured that my new iMac Itunes account is authorized for that computer & have synced my iPhone once, which updated iCal, but no apps.
    Any guidance you can provide would be greatly appreciated. I tried to use the Mac Migrate program but did not seem to have any luck. It took almost 12 hours to run over wifi and hung up at the very end. Also, I do not see any evidance of any files being added.
    Thanks.
    Jeff / Texas

    Migration didn't work for me on the music side of things either. What did work however was transferring the entire iTunes folder over to my new computer. Everything switched then, and it was just like iTunes on my old mac. Maybe if you can find the library files in there or something and transfer them over.

  • How do you share some photos from an album in iphoto to facebook without bringing over all the pictures?

    How do you share some from photos from an album in iphoto to facebook without bringing over all the pictures?

    Select the photo(s) and click share and share to the face book album you want
    LN

  • How do I move a project from an external drive back into Imovie

    I recently bought an Iomega external hard drive to store documentary movies so that I wouldn't jam up my Imac's free space. However, after I moved an imovie/idvd project to it, and wanted to make changes, I could not move the project back into the Imac's drive. (It also would not burn from the external, giving me a multiplex error) When I tried to move the movie back into Imovie on the Imac it said Quicktime couldn't parse it. I saw various posts about parsing, but not about specifically about moving a project from an external drive. Can anyone offer any suggestions? It seems to me that I should be able to move a project back and forth without that much trouble.

    Sounds like you have a DVD format (MPEG-2) and not an iMovie Project file.
    The key phrases are "multiplex" and "parse". Both suggest MPEG-2 format when opened in QuickTime. It would also throw an error -2048 message if MPEG-2.
    But another issue could be the file format of the external drive. Most ship pre-formatted for the Windows OS's but a Mac user should format using HFS+ (and others). If you didn't format the drive before moving the large iMovie Project onto it it may have become severely fragmented if the external used FAT 16 or FAT 32 (very common) formats. They have a 2 or 4 GB file size limit, respectively and would have made your Project unreadable when moved back and forth.
    Use the Disk Utility app to find out the format of your external drive.

Maybe you are looking for