How do I correct a typing error?

New to Blackberry.
I have typed a message but if I make a mistake I do not know how to delete a letter, where is the delete key?

BB 9100: There's a key on the right with "del" and an arrow (directing left) printed on.
BB 9105: left bottom key showing an arrow (directing left).

Similar Messages

How do I correct an "undetermined error" when trying to reload Photoshop CS4 remotely on a Mac Air?

How do I correct an "undetermined error" when trying to reload Photoshop CS4 remotely on a Mac Air?

Hi dsalacain,
Are you trying to run the setup from network location. If yes please copy the installation file to the desktop of the Mac and try installing again.
Regards,
Romit Sinha

How do I correct General Printer error 0X610000f6 for a HP Officejet 6500

The printer keeps throwing this erro message out. How can I correct it.

Hi,
Here is an all encompassing 0x error document that contains several of the documents for 0x depending on your error message along with it. Look within the first 3 bullets in the document.
0x error on front panel
I suspect it is the 3rd bulleted section
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

How do I correct this Java Error....

I'm getting 2 different Java Errors while attempting to play on-line games. I can't figure out how to correct them. I have uninstalled and re-installed Java several times. Even installed updates 1-10. For Java 5.0.
The errors in question
Several Java Virtual Machines running in the same process.
and
Unable to load run time environment.
Any help would be greatly appreciated.

This bug is being fixed in 6u10. Which will be finished late this summer.
You can test the beta from here:
[http://java.sun.com/javase/downloads/ea.jsp]
Here is the bug in our bug database:
[http://bugs.sun.com/view_bug.do?bug_id=6516270]
-Roger

How do I correct an installing error?

I selected install when I received an update to itunes. After install was completed, I tried to get on to my Itunes. I received: "Itunes cannot run, file msvcr80.dll is missing from your computer". A second message popped up saying: Itunes was not installed correctly. Please reinstall. Error 7 (Windows error 126)"

Sorry to hear that
Hopefully this article will assist you:
≈≈≈≈≈≈≈≈
http://support.apple.com/kb/TS5376?
≈≈≈≈≈≈≈≈
Please do reply with results/questions.

How do I correct this? Error: TypeError: netscape.security.PrivilegeManager is undefined

Every time I log on to the internet this come up: Error: TypeError: netscape.security.PrivilegeManager is undefined. How can I get rid of it? Thanks

hello larry806, this error is most likely caused by an outdated extension - to check that, please launch firefox in safe mode once & see if you can replicate this error message then? if not, please try disabling your addons until you find the right one & keep it disabled in case there is no update available for it...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

How do I correct a build error while saving "Calculate Color Index Array.vi"?

I have an application that takes some data and then periodically generates a nifty 3d graph. When trying to compile this application to run on a stand-alone machine, i get an error message that crashes the build. This is the information that is generated for the error:
An error occurred while saving the following file:
C:\National Instruments\LabVIEW 2009\vi.lib\Math Plots\3D Math Plots\3D Surface\3D Surface Datatype\Protected\Create Plot Data\Calculate Color Index Array.vi
Invoke Node in AB_Source_VI.lvclass:Close_Reference.vi->AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Build.lvclass:Build_from_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi->AB_UI_FRAMEWORK.vi->AB_Item_OnDoProperties.vi->AB_Item_OnDoProperties.vi.ProxyCaller
<APPEND>
Method Name: <b>Save:Target Instrument</b>
Details:
Error 6 occurred at AB_Source_VI.lvclass:Close_Reference.vi -> AB_Build.lvclass:Copy_Files.vi -> AB_Application.lvclass:Copy_Files.vi -> AB_EXE.lvclass:Copy_Files.vi -> AB_Build.lvclass:Build.vi -> AB_Application.lvclass:Build.vi -> AB_EXE.lvclass:Build.vi -> AB_Build.lvclass:Build_from_Wizard.vi -> AB_UI_Frmwk_Build.lvclass:Build.vi -> AB_UI_FRAMEWORK.vi -> AB_Item_OnDoProperties.vi -> AB_Item_OnDoProperties.vi.ProxyCaller
Can anyone help me understand why the 3D Surface Datatype.lvclass keeps booching on my compile?
Thanks!

Check this

How do I correct the syncing error when the i-tunes logo and connector cord are displayed on screen?

I have just installed the update for ios07.03 and am attempting to sync my phone. My phone appears to be locked with an image of the itunes logo and a connector (with arow) pointing to this logo on screen. I can't select the sync option in i-tunes. I have attempted to re-set the phone, unistalled and re-installed itunes but nothing is working. Any suggestions??

PRE_help
For Premiere Elements user, I would make note that the presets for burn to disc cannot be customized by the user within the program.
a. The second thread that you pointed rkclarke36 to does talk about resolving this issue by changing the burn to disc frame rate from
24 fps to 30 fps. But, that was for Premiere Pro, not Premiere Elements. In Premiere Pro, can the user really customize an Adobe burn to disc
preset?
For Premiere Elements
If the burn to is to DVD disc for DVD-VIDEO, the user is
confined to two frames rate, 25 interlaced frames per second or 29.97 interlaced frames per second. But, he/she cannot change the frame rate
within the preset.
If the burn to is to DVD disc for AVCHD DVD, the user again meets different presets, but cannot change the frame rate within the preset. For Premiere Elements 13 burn to AVCHD disc, the presets are
Premiere Elements 13
H.264 1440 x 1080i NTSC Dolby
H.264 1440 x 1080i PAL Dolby
H.264 1440 x 1080p NTSC Dolby
H.264 1920 x 1080i NTSC Dolby
H.264 1920 x 1080i PAL Dolby
H.264 1920 x 1080p NTSC Dolby
Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
b. Mark has not yet offered the details of the Timeline content (video and/or stills) being taken to burn to DVD-VIDEO or AVCHD DVD. So, frame size as per your first mentioned link might be an avenue to pursue. I would include that with all my testing of Premiere Elements 4 to 13, I have not gotten this particular dll error
with any oversized stills.
ATR

How do I correct a Runtime error R6025?

I have been using Creative suite 5 for several months with no problems
Two days ago I logged in to Photoshop and got an error saying
An unexpected and unrecoverable problem has occurred Photshop will now exit.
When I hit of I get
Runtime error! Program C... R6025
Pure virtual function call.
I tried my other Adobe products and get the same results
Everything else seems to be running fine.
I uninstalled all of my adovbe and reinstalled and I am still having the same problem
Help

This has nothing to do with Adobe software. This is a system error and usually indicates problems with missing DLLs or other such stuff. Could have been a Windows update or some otehr programs.... Impossible to tell from a distance. Check your Windows event viewer for more concrete info.
Mylenium

How do i correct a download error. window error 1114

my Itunes download won't run completely. I keep getting a Runtime C+ library error. HELP...

Hey debbiefromabilene,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. Let’s troubleshoot the iTunes installation by completely removing and reinstalling iTunes and all related components (it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Additional Information:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M.

How do I correct "door open" error in printer status when no doors are open? Printer will not print

I have a K5400 printer and it won't print because of a "door open" error. I have manually tried the switches and it makes no difference.

Michael,
Thank you very much for your reply.
I have downloaded the INSTALLER CLEAN UP UTILITY and read the readme file which states (among other things) the following
which worries me a little:
"A dialog box will be displayed that contains a message, a list of installed products, and four buttons.
The message that is displayed is as follows:
   Continuing further will make permanent changes to your system. You may
   need to reinstall some or all applications on your system that used the
   Windows Installer technology to be installed. If you do not want to
   proceed, please press the 'Exit' button now. Choosing 'Remove' will
   make the permanent changes."
I have 73 other programs that used the installer including the problem program in question..Adobe Reader 9.2 [9.2.0].
Should I be concerned with the above underlined in the readme file?
I am 77 and not very tech oriented so I have the above last question.
Thank You very much for your time.
wsmith8

Silly questions but new on apple, Q1 how do I cut and paste Q2 when I have a spelling error with the red line under it how do I correct it?

Q1 How do I cut and paste
Q2 how do I correct a spelling error when it has a red line under it?

Lynnie2002 wrote:
Q1 How do I cut and paste
Highlight the item.
Finder>Edit>Copy
Place the item where you want to
Finder>Edit>Paste
There is 3rd party software that makes cut & paste easier with just 1 or 2 steps.
Q2 how do I correct a spelling error when it has a red line under it?
You can find the correct spelling in the Apple dictionary. Just add the correct spelling & delete the error.
Care to share which OS you are using and which model iMac you have?

How do I correct a printer communication problem?

How do I correct the following error when trying to print on my Macbook Pro to an epson XP-410 printer. "rastertoescpII quit unexpectedly" Communication is there with the printer as I can print a test page. another Macbook pro also prints fine to the printer.

Hello, MarkDallas.
Thank you for visiting Apple Support Communities.
Here are a couple articles that I would recommend when troubleshooting printer issues.
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/HT3500
Regards,
Jason H.

How do I fix a DRM Error from Netflix

How do I correct a DRM Error which I get from Netflix. I called Netflix however they told me to delete a file on my imac so with that I'm lost.

Netflix does not run on PPC Macs. Look at your Apple menu -> About This Mac for your version of Mac OS X and your processor. PPC=PowerPC G3, G4, or G5. Only Intel Macs will run Netflix with the correct versions of Silverlight plugin.

How can we correct and process errorrecords in session and call transaction

hai all
how ca we correct and process error records in session and call transaction method . tell me with coding.
Edited by: swamy katta on May 14, 2008 10:25 AM
Edited by: swamy katta on May 14, 2008 10:26 AM
Edited by: swamy katta on May 14, 2008 10:27 AM

hi,
Check out the below sample code ...Here are the records are getting posting with call transaction method and a session is getting created with erroreneous records....
REPORT ztest_report
NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZRASH.
*                 Internal Table Declarations                          *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
         KUNNR(10),
         BUKRS(4),
         KTOKD(4),
         ANRED(15),
         NAME1(35),
         SORTL(10),
         STRAS(35),
         ORT01(35),
         PSTLZ(10),
         LAND1(3),
         SPRAS(2),
         AKONT(10),
       END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
         KUNNR(10),
         EMSG(255),
       END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
         KUNNR(10),
         SMSG(255),
       END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
       V_TLINES LIKE SY-TABIX,
       "For storing total records processed.
       V_ELINES LIKE SY-TABIX,
       "For storing the no of error records.
       V_SLINES LIKE SY-TABIX.
       "For storing the no of success records.
*          Selection screen                                            *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
             V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
*          Start-of-selection                                          *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
*        TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
*          End of Selection                                            *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*&      Form form_uploadff
*     Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = LV_FILE
*     FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
*     HEADER_LENGTH                 = 0
*     READ_BY_LINE                  = 'X'
*     DAT_MODE                      = ' '
*   IMPORTING
*     FILELENGTH                    =
*     HEADER                        =
    TABLES
      DATA_TAB                      = IT_FFCUST
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
    DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
    DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM.                    " form_uploadff
*&      Form Form_bdcgenerate
*     Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
    PERFORM POPULATEBDC USING :
                                'X' 'SAPMF02D' '0105',
                                ' ' 'BDC_OKCODE' '/00' ,
                                ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                'X' 'SAPMF02D' '0110' ,
                                ' ' 'BDC_OKCODE' '/00',
                                ' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
                                ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                ' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
                                ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                'X' 'SAPMFO2D' '0120',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0125',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0130',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0340',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0360',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0210',
                                ' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0215',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0220',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0230',
                                ' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
    CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
    MESSAGES INTO IT_CUSTMSG.
    IF SY-SUBRC <> 0.
*--Populating the error records internal table.
      IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_ERRCUST.
      CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
      IF V_FLAG1 = ' '.
        PERFORM FORM_OPENSESSION.
        V_FLAG1 = 'X'.
      ENDIF.
*--Inserting the error records into already open session.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_INSERT.
      ENDIF.
*--Populating the Success records internal table.
    ELSE.
      IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_SUCCUST.
      CLEAR IT_SUCCUST.
    ENDIF.
*--Displaying the messages.
    IF NOT IT_CUSTMSG[] IS INITIAL.
      PERFORM FORM_FORMATMSG.
    ENDIF.
*--Clearing the message and bdc tables.
    CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
    PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM.                    " Form_bdcgenerate
*&      Form populatebdc
*       FOrm to Populate the BDC table.
FORM POPULATEBDC USING    VALUE(P_0178)
                           VALUE(P_0179)
                           VALUE(P_0180).
IF P_0178 = 'X'.
    IT_CUSTBDC-PROGRAM = P_0179.
    IT_CUSTBDC-DYNPRO = P_0180.
    IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
    IT_CUSTBDC-FNAM = P_0179.
    IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM.                    " populatebdc
*&      Form FORM_OPENSESSION
*       Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
   EXPORTING
     CLIENT                    = SY-MANDT
     GROUP                     = LV_SESNAM
     HOLDDATE                  = '20040805'
     KEEP                      = 'X'
     USER                      = SY-UNAME
     PROG                      = SY-CPROG
* IMPORTING
*    QID                       =
   EXCEPTIONS
     CLIENT_INVALID            = 1
     DESTINATION_INVALID       = 2
     GROUP_INVALID             = 3
     GROUP_IS_LOCKED           = 4
     HOLDDATE_INVALID          = 5
     INTERNAL_ERROR            = 6
     QUEUE_ERROR               = 7
     RUNNING                   = 8
     SYSTEM_LOCK_ERROR         = 9
     USER_INVALID              = 10
     OTHERS                    = 11
IF SY-SUBRC <> 0.
    WRITE :/ 'Session not open'.
ENDIF.
ENDFORM.                    " FORM_OPENSESSION
*&      Form FORM_INSERT
*       fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE                  = 'FD01'
*     POST_LOCAL             = NOVBLOCAL
*     PRINTING               = NOPRINT
*     SIMUBATCH              = ' '
*     CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = IT_CUSTBDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
IF SY-SUBRC <> 0.
    WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM.                    " FORM_INSERT
*&      Form FORM_CLOSESESS
*       Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM.                    " FORM_CLOSESESS
*&      Form FORM_FORMATMSG
*       Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
      ID        = SY-MSGID
      LANG      = SY-LANGU
      NO        = SY-MSGNO
      V1        = SY-MSGV1
      V2        = SY-MSGV2
      V3        = SY-MSGV3
      V4        = SY-MSGV4
    IMPORTING
      MSG       = LV_MSG
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS    = 2.
IF SY-SUBRC = 0.
    WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM.                    " FORM_FORMATMSG
*&      Form form_writeop
*       To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
           / 'No of Error Records :',V_ELINES,
           / 'No of Success Records :',V_SLINES,
           / 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM.                    " form_writeop
* if routeindicator is initial.
*   LOOP AT IT_YMMEE00090.
*      LV_LENGTH = STRLEN( IT_YMMEE00090-CHANGETYPE ).
*      IF SY-TABIX = '1'.
*        IF IT_YMMEE00090-CHANGETYPE = 'B' AND LV_LENGTH = 1.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE = 'R' AND LV_LENGTH = 1.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE = 'S' AND LV_LENGTH = 1.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE CA 'BRSCD' AND LV_LENGTH GT 1
*                                          AND LV_LENGTH LE 5.
*          ROUTEINDICATOR = 'S'.
*        ENDIF.
*      ELSE.
*        IF IT_YMMEE00090-CHANGETYPE = 'B' AND LV_LENGTH = 1 AND
*                                         ROUTEINDICATOR = 'S'.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE = 'R' AND LV_LENGTH = 1 AND
*                                         ROUTEINDICATOR = 'S'.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE = 'S' AND LV_LENGTH = 1 AND
*                                         ROUTEINDICATOR = 'S'.
*          ROUTEINDICATOR = 'S'.
*        ELSEIF IT_YMMEE00090-CHANGETYPE CA 'BRSCD' AND LV_LENGTH GT 1
*                  AND LV_LENGTH LE 5 AND ROUTEINDICATOR = 'S'.
*          ROUTEINDICATOR = 'S'.
*        ENDIF.
*      ENDIF.
* ENDLOOP.
* endif.

How do I correct a typing error?

Similar Messages

Maybe you are looking for