How do I correct my display which appears like a photo negative (='s colors reversed)

I recently Uniblue's Registry Booster and System Tweaker [bad idea!] . Registry Booster claims to have corrected 150+ errors. But it appears to have also utterly disabled my favorite browser [Google Chrome] and makes Mozilla Firefox appear like a photograph negative.

Thanks Terence. I know about that in iPhoto already. I use it often. However, that is not an option when creating a book. When you click on the photos button in the bottom right corner when creating a book, it shows the photos but there is no "info" selection. The only way I find out the date is to drag the photo into the book, then go back and hover over the page number it was imported to and hope eventually the date shows up. If it's not the date for the chapter I wanted (as my chapters are divided by months), I then drag it back out and try again until I find a photo that does have that date. It's taken hours and is different from previous versions of iPhoto where I have created books before. This is iPhoto 11, trying to create a hard bound book.

Similar Messages

  • HT201210 Brand new iPod touch, everything appears like a photo negative .for example video and photo .cannot see how to rectify

    My new ipad touch was delivered sat 1st February 2014 , after charging it I proceeded to install various items . All ok apart from everything viewed appears like a negative picture, for example photo and video . Google earth  , streaming tv etc . Tried adjusting contrasts and brightness , please help

    Seems like Invert Colors is turned on in Settings>General>Accessibility. Check and see

  • HT3275 Can you please let me know how I can correct the following which appears during back up with time machineThe backup disk image "/Volumes/Andreas ZERVOS's Time Capsu-1/Andreas Zervos's MacBook Pro 1.sparsebundle" could not be created (error -1)

    Can you please help me to solve the following problem occuring during back up with time machine?
    The backup disk image “/Volumes/Andreas ZERVOS's Time Capsu-1/Andreas Zervos’s MacBook Pro 1.sparsebundle” could not be created (error -1)

    Hello,
    I'm not sure what it means, but...
    http://www.levelofindirection.com/journal/2009/10/10/using-a-networked-drive-for -time-machine-backups-on-a-mac.html
    http://www.coastalvectors.com/blog/2011/02/understanding-time-machine-and-sparse -bundles/
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    I can't imagine anything TMwise not covered.

  • TS1814 I tried updating my iphone 4 using itunes but i keep getting a message saying iphone software server could not be contacted. What does this mean and how do I fix my iphone which appears to be in recovery mode.

    I tried updating my iphone 4 using itunes but i keep getting a message saying iphone software server could not be contacted. What does this mean and how do I fix my iphone which appears to be in recovery mode.

    USER-kswest wrote:
    BTW I have gone to the "Contact iTunes Support" and do NOT get anywhere. That is why I am here!
    You need to contact iTunes support and send an email by following the link I posted.
    Simply going there does nothing.

  • How can i design square signal which having a positive and negative values equal to each other and separated from each other by controlled time or distance

    How can i design square signal which having a positive and negative values equal to each other and separated from each other by controlled time or distance, As it is shown in the figure below. and enter this signal in a daq.
    Solved!
    Go to Solution.

    By the time you spend for the nice diadram you might have done the vi
    Your DAQ like to have a waveform (array of values and dt ak 1/samplerate)
    If you set the samplerate you know the array length , create a array of zeros, and set the values of both amplitudes ... 
    Since I don't want to wire others homework here are some pictures
    And there are some drawbacks is room for improvement in my solution, just think of rounding errors ... and what might happen if the arrays get bigger ....
    Spoiler (Highlight to read)
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • Displaying which albums a particular photo is in

    I have about 8000 photos in my library. Some are duplicates. I want to eliminate the duplicates but I'm not sure which of the duplicates are already in one of my albums. I don't want to delete the one that is already in an album and I don't want to go hunting through all my albums to make sure which duplicate I can safely delete.
    I realize that my library is small comparatively, but going through 8K photos isn't exactly easy.
    Is there a way to display which albums a particular photo is in? In itunes, if you right click on a song in the library it has an option to "show in playlist" that lists the playlists that a song is in. Is there anything like that in iphoto?
    Thanks!!
    Melinda

    No there isn't.
    Regards
    TD

  • HOW DO I CHANGE THE SCREEN SETTING SO IT DOES NOT LOOK LIKE A PHOTO NEGATIVE

    My phone screen and all the icons/photos etc look like a 'photo negative' how do I undo this and return the screen to the normal settings - thank you

    Use Settings > General > Accessibility > White on black and turn this OFF.

  • My display screen looks like a photograhic negative, what is wrong?

    The display looks like a photgraphic negative.  Is there a simple way to change it back?

    You're welcome

  • Pictures in email messages I receive will not display. How do I correct this problem which only occurs in Thunderbird as far as I can tell.

    I receive email messages without problems. The typed words are fine. No pictures will display. I receive pictures and video in my browser. Only my email is a problem.

    Here is another suggestion.
    If you can never see remote images because the "Show Remote Images" button is always missing check that permissions.default.image is set to 1 using the config editor. It was here that I saw it:
    http://kb.mozillazine.org/Privacy_basics_%28Thunderbird%29
    This has worked for another person. It seems a bit involved but take your time and do what it says.

  • How to modeling BOM for operation which appears more than 1 time in a route

    Dears,
    We have a route like below, operation OP01 appears 2 times in different sequence.
    OP01->OP02->OP01-.OP04
    (seq1->seq2->seq3->seq4)
    How can I modeling its BOM to let user assembly like below
    OP01(seq1): use component01
    OP01(seq3): use component03
    Since BOM maintenance can not set to assembly a component in operation at a assigned sequence of a router, so in the OP01(seq1), it will display component01 and component03 to let user assembly.
    How can we handle this problem?
    Thank you.

    Ivan,
    I looks like you are modeling two different operations as one operation. When process steps differ in the component you are assembling, it is almost always a gut idea to model then as separated operations (assemby component1 and assembly component3).
    ME allows you to use the same operation several times in a route but they should really mean the same.
    Best Regards,
    Miguel

  • How do I correct my name as appears in emails

    When I send an email from my iPad, my name appears incorrectly, as if  my last name was auto-corrected. How can I change this?

    Glad I was able to help.
    Interestingly, solutions to Apple issues tend to be pretty straightforward, especially when looking back at them.
    For future reference, that's often the trick to figuring them out ... just figure out where would the solution likely be.  I'm trying to say whatever the issue, the solution is likely not too complicated in the world of Apple.
    Enjoy your iPad and Apple gear.

  • How to create a context menu which appears on right click

    Hello Experts,
    I want to create a context menu which should appear on the right click of a mouse anywhere on the screen.
    I have seen this functionality in one of the sap applications, and i guess this is an inbuild functionality in Webdynpro for ABAP but in WebDynpro Java i haven't found any such inbuild functionality.
    Does anybody have any idea about it ?
    Regards,
    Amol

    Context menus are not supported in NW04 and NW04s, they will be available in the next major release.
    Armin

  • How do I remove Safari favorites which appear under the URL line

    I have some old fsavorites which I have added to the menu line under the URL box that I no longer need.  I cannot edit them in the favorites edit window, so how do I delete them?

    Tap "Edit" to delete Favorites

  • How can I eleminate yandex.ru, which appears as my browser whenever I open a new tab?

    My homepage is google, and my browser is mozilla. But everytime I open a new tab the browser changes to yandex.ru. I can't seem to find where to eliminate it.

    You have possibly inadvertently installed some software of malware that is causing this. If it is not visibly listed in your Firefox add-ons you may need to change your preferences and find and remove the software. The problem software may be listed as a program in your Vista OS listing and it may be easy to uninstall or it may be more problematic.
    See
    *[[cannot uninstall an add-on]]
    * [[troubleshooting plugins]]
    * [[searches are redirected to another site]]
    Post back with how you get on. If the problem turns out to be more malicious then have a look at this post [https://support.mozilla.com/en-US/questions/757994#answer-109685] for suggestions.

  • Display of many web sites is jumbled ie text overlapping visuals how do I correct the display?

    For instance if I log into my bank's site, the log in windows are obscured by text from the site. This happens not only with this site but this is typical of what happens
    Another way to say it is that web pages are not clear or not aligned properly. If I go to IE this does not happen

    Reset the page zoom on websites that look wrong: "View > Zoom > Reset" (Ctrl + 0 (zero))<br />
    See http://kb.mozillazine.org/Zoom_text_of_web_pages
    If you increased the minimum font size then try the default setting 'none' as a high value can cause issues like you described.
    * Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    * Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"

Maybe you are looking for