How do I correct random audio pops in Premiere Elements 13?

Please help me with this audio issue! I hear occasional pops (skipped words, not smooth narration) in my edit. I shot the footage with a Rode video mic, but have not had this problem with this microphone before, and furthermore the pops appear not on the same marks every time, so it is not embedded in the original footage and therefore I conclude that the original audio quality is fine. At first I thought it was a yet-to-render issue, but after rendering it (while editing), and ALSO after publishing it to my computer to watch a version there, I still here random pops. Once I published it to my computer, the pops were stuck to specific points in the edit, but this is not so when I watch my edit in Elements, the pops are always in different places, and often will not be there when I roll back to try to immediately listen again for a just-heard pop.
Can anyone help with this? How can I smooth out my audio?

Hi Steve,
Thanks for getting back
I used a Samsung SMX-F40BP/XEU "Handycam" recording from the the image projected on to a screen. This produced mp4 video files on an SD Card, H.264/AVC Format with AAC Audio
I then dragged and dropped the raw video files on to the PC hard drive, and added the folder to the Adobe Organizer.
When creating the projects I
1) Create a a New Project PAL Standard DV 48KHz to match the 4:3 aspect ratio of the original film
2) Drag the video/clip I intend to work with from the organizer window in to the work are of Adobe Premiere Elements 11.
When I was originally doing this yesterday for the first 15 clips, when added to the timeline, the video clips appeared as 1 contiguous clip as in the first image i posted.
When i went to work today I noticed that when i dragged a clip from the organiser to the work area, the video took longer to appear on the timeline, I could see the progress as it was added, with lines appearing where scenes/splits are being automatically added as in the second image I posted.
I noticed first thing that the clips were appearing in the organiser window with different icons, and in some cases I could expand the clips to see all scenes that had apparently been generated automatically. All clips in the orgnaiser now appear with the same icon, and are all expandable.
If i now create a new project and use one of the original clips that originally appeared as 1 contiguous clip on the timeline, it is now split automatically, as with the later clips.

Similar Messages

How can I eliminate random audio interruptions?

How can I eliminate random audio interruptions?

I asked because you posted in the Accessibility -> Hearing community area. You might want to try the community area dedicated to your hardware (desktop, notebook, etc.). See https://discussions.apple.com/welcome

How do I edit the video audio in Adobe Premiere Elements 10

I want to edit the video audio, so that I can get rid of some of the sounds and background noises. Also, how do you import Plug-ins into Adobe Premiere Elements 10? I have trial versions of Adobe Audition CC and SmartSound. Thanks in advance for your help!

woody122
What computer operating system is your Premiere Elements 10 running on? And, very important, what video card/graphics card does your computer use.
If a NVIDIA GeForce card, then that needs to be looked at first because of the serious and known Premiere Elements 10/NVIDIA GeForce issue which is described in one of the announcements at the top of this forum.
SmartSound is an feature included with Premiere Elements 10. Why are you looking at any trial version of SmartSound?
As for Adobe Audition CC, I was not aware that this is a plug-in. As far as I know, Adobe Audition CC is an application that Premiere CC can integrate with as a CC application which Premiere Elements is not.
See the following video tutorial
Clean up Premiere Pro audio clips with Audition | Adobe Creative Cloud tutorials
Look at the price tag afterward, probably on subscription rates?
Please check out the Premiere Elements 10 audio effects, especially those related to noise reduction.
Have you looked at the free audio editor named Audacity and its noise reduction opportunities?
Please give more details in support of your Adobe Audition CC being a plug-in if you are confident that it is.
Thanks.
ATR

How to get audio into Adobe Premiere Elements 12?

How to get audio into Adobe Premiere Elements 12?
I have filmed an air show with a very good camera JVC pro
And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
I think I tried everything for 4 days now.
Sound in my computer works perfectly
I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
I have checked the sound card.
Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
It's not normal if you will keep on producing audio for over 4 days at Adobe
The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
My name is Thore Hult
live in Karlshamn in Sweden

Thore Hult
On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
For your immediate problem.
What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
for your Audio Name and Status.
http://www.headbands.com/gspot/
The other properties of the file there would also be of interest.
When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
If so, do you wait for it to complete before you move forward in the project?
Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
Can we assume that your troubleshooting has included checking
a. Volume control within the project
b. Edit Menu/Preferences/Audio Hardware ASIO
Let us start here and then we can decide what next if necessary.
Thanks.
ATR

How can I import MP3 audio files into premiere pro cs5?

Can any one help?
How can I import MP3 audio files into premiere pro cs5?

It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
fifa 14 coins
cheap fifa coins

How many times can I install Photoshop and Premiere Elements 13?

How many times can I install Photoshop and Premiere Elements 13?

mbuenger
Are you referring to how many times can I install, uninstall, reinstall Photoshop Elements 13 or Premiere Elements 13 on the same computer?
Or, how many of your computers can have a same purchased activated serial number at the same time for either of these products?
If the former, I know of no limit.
If the latter, the answer would be as John as mentioned.
ATR

How can I output the alpha channel in Premiere elements 10

How can I output the alpha channel in Premiere elements 10. What format should I use?
Tried outputting to an AVI filet but the file did not contain an alpha channel that After Effects 5.5 would recognize.

Bill,
I hope you ordered 32 GB or more on that new computer After Effects 5.5 takes up as much as it can.
The Roto Brush tool is really a timesaver over ordinary Rotoscoping. Although, my problem now is: when I try to send a 1 min. And 11 second video from Adobe Premier Pro 5.5 two Adobe Media encoder 5.5, the process hangs in wait state in the Media Encoder. I have filed a request for help on the Media Encoder forum.
I know you will put your new computer to use in helping other people and for this I thank you.

When uploading to Facebook how can I remove the "via Photoshop & Adobe Premiere Elements Uploader" ?

Hi everyone,
I am slowly getting to grips with Premiere Elements12.
When uploading to Facebook how can I remove the "via Photoshop & Adobe Premiere Elements Uploader" ?
I see there was an earlier posting (http://forums.adobe.com/message/3320214#3320214) which was for version 8, and I can understand the issue, but, (assuming its the same issue) has a remove tagline feature been installed??
Is this also the same in the Pro version?
Thanks in advance for any good info
Pete

Offul Duster
I do not know if Premiere Pro CS6 CC offers an upload to Facebook export. Strictly an Elements Windows person here.
The Premiere Pro Forum is a good place to ask about that.
http://forums.adobe.com/community/premiere
I do not have any Facebook accounts, so I cannot answer your specific Facebook question, but generalizing I can offer the following suggestions.
If your issue with Publish+Share/Computer/Social websites/Facebook is with tagging, you might want to check the Facebook web site for the Video Manager section of it (or that by some counterpart name). I know that YouTube at the YouTube web site allows the account holder to go into Video Manager and manage his/her tags for the file uploaded there and displaying. Have you been there and done that type of thing for your Facebook upload.
Please see
https://www.facebook.com/help/tag-suggestions
https://www.facebook.com/help/privacy/photos
Please review and then let us know the outcome.
Thank you.
ATR
Add On...As suggested in your inserted link, in Premiere Elements can you export to file saved to computer hard drive and then upload that file from there to Facebook at the Facebook web site without the tagging issue?

How do i convert a slideshow made in premiere elements 11 to premiere elements 12

how do i convert a slideshow made in premiere elements 11 to premiere elements 12

rfgold17
Given that you have Photoshop Elements 11 and Premiere Elements 12 on the same computer....
1. Know the name of the Elements Organizer 11 catalog (See Elements Organizer 11 File Menu/Manage Catalogs/Catalog Manager).
Close out of there.
2. Open the Elements Organizer 12, accessed from Premiere Elements 12.
3. In the Elements Organizer 12, go to File Menu/Manage Catalogs/Catalog Manager and click on the Convert button in the Catalog Manager dialog.
4. In the Convert Catalog dialog that appears, look for the name of your Elements Organizer 11 catalog, select it, and then hit the Convert command at the bottom of that Convert Catalog dialog.
5. From that point onward, follow the messages that you get from the program. (If you have any problems, I will go into deeper details.)
When all is done, you will have your Elements Organizer 11 catalog opened in Elements Organizer 12 where it will remain in use until you switch to another catalog there. Your Elements Organizer 11 will remain as it was in Elements Organizer 11. Moving forward, what you do in the converted catalog in Elements Organizer 12 will not affect the Elements Organizer 11 and vice versa.
Please let us know if you are OK with the above and if it worked for you.
Thank you.
ATR

How to use the stabilizer effect on Adobe premiere elements 11

Can anyone show me how to use the video stabilizer effect on premiere elements 11 step by step ?
Thank you !

achiu8888
I suspect that the principles would lend themselves to a step by step but how the effect works with your specific video will depend upon the degree of shakiness and other factors.
1. Your video clip on the Timeline of a project with the project settings which match the properties of your source video (part of all works whether or not the Stabilizer is involved.
2. Go to fx Effects Tab at the bottom of the Expert View, navigate to the Video Stabilizer and click on it to view its thumbnail. Drag the effect's thumbnail from there into the video clip on the Timeline.
3 I ran into an online excerpt of the Video Stabilizer in Adobe's Classroom in a Book, you may want to follow the path from there.
http://books.google.com/books?id=7zdjWNElM1IC&pg=PT252&lpg=PT252&dq=premiere+elements+stab ilizer&source=bl&ots=YM4HHrmZAl&sig=MpFt6GJn7IkgESWBZ6sC6wA7aEM&hl=en&sa=X&ei=ZZ2zUbbVI5W3 4APDq4D4DQ&sqi=2&ved=0CHoQ6AEwBw
Also, you might want to put that information together with Adobe Effects Reference's description of the options iin the Applied Effects Palette/Stabilizer Panel.
http://help.adobe.com/en_US/premiereelements/using/WS4B8135DA-083C-42eb-B09E-65070ECBC889. html#WSeffff8bffc802084cc1873012fdd6069b3-8000
(Scroll down until you get to Video Stabilizer options description.)
The above should supply with good starter information. If you need clarification on anything that I have written, please do not hesitate to ask.
Thanks.
ATR

I lost my audio on Adobe Premiere Elements 12

I lost my audio on Adobe Premiere Elements 12.
All my other programs are working OK
II think one of my settings as changed (my be because of a update)
I did a reboot a number of times( didn't help )
I am running Windows 8
Can you help?

R.E. Day
Given you have Premiere Elements 12 on Windows 8 64 bit.
Did you update from 12 to the 12.1 Update using an opened project's Help Menu/Update?
What update were you referring to when you said you thought the problem might be related to an update?
We need a lot more details of "lost audio Premiere Elements 12"
Does that mean that, when you import video with linked audio into a project, you only SEE the video portion in Project Assets. No audio file seen in Audio Track 1?
Or, does that mean that, when you import video with linked audio into a project, you see the audio file but it has no sound?
There is another possibility. This is a known issue that is affecting some where sound is lost from the numbered audio tracks and soundtrack when a narration track is created using the program's Narration Tool and added to the project. Is that what is happening in your situation?
Also, did you check the Edit Menu/Preferences/Audio Hardware ASIO setting, Input and Output?
Lots of questions, lots of answers needed to sort through to get to the core of the matter.
Looking forward to your follow up.
Thank you.
ATR

How can I stop random audio advertising files from playing?

Recently, my Macbook Pro has been playing random audio files. They are mostly advertisments about mucus medicine and news clips about soccer. Yesterday, I discovered that when I quit Safari, the audio stops. Today the problem is back again. What can I do to get rid of these annoying ads?

Safari > Preferences > Security
Make sure that "Block pop-up windows" is enabled.
Temporarily disable the plug-ins
Safari > Preferences > Security > Web content: Enable plug-ins
If the audio is from Flash based ads it should stop.
Re-enable that feature later.
Best.

How do I prevent automatic scene creation in Premiere Elements 11

I'm real noob with Premiere Elements, so hope I have the correct terminology. I am in the process of converting a collection of old Super 8 cine film to DV. I have the complete reels as a collection of MP4s on my computer hard drive, and am using Organiser as the source when adding videos to a project. While working I have been able to add a video, then quickly apply rotation, resizing (to fit the full 4:3 frame) and then edit the video into clips or scenes to form chapters on a DVD. However, when working yesterday I noticed that when I drag a video in to the project workspace, it is being automatically divided in to multiple scenes. I notcied also that in the Organiser the videos can be expanded to show the scenes. This has made what was a fairly straight forward task more complicated as I am having to examine and work with multiple clips instead of just the one.
I'm not aware that I made any changes to settings, but is there something I can change to stop this behaviour? it does seem that it is a background process performed by Organiser, as the video files I was working with originally that were not automatically split into scenes now appear to be. In the projects I orginally created the video still appears on the timeline as one contiguous clip.
Video added to timeline appears as 1 contiguous clip
Video added to timeline is automatically split in to multiple clips or scenes
I've had a look through preferences of Organiser and the project, but can't see anything obvious.
I understand that I can apply edits to 1 clip and paste the attributes across all, but it is the process of editing in to the scenes/chapters that I want that is now considerably more complicated and laborious than it was previously.
Thanks
Matt

Hi Steve,
Thanks for getting back
I used a Samsung SMX-F40BP/XEU "Handycam" recording from the the image projected on to a screen. This produced mp4 video files on an SD Card, H.264/AVC Format with AAC Audio
I then dragged and dropped the raw video files on to the PC hard drive, and added the folder to the Adobe Organizer.
When creating the projects I
1) Create a a New Project PAL Standard DV 48KHz to match the 4:3 aspect ratio of the original film
2) Drag the video/clip I intend to work with from the organizer window in to the work are of Adobe Premiere Elements 11.
When I was originally doing this yesterday for the first 15 clips, when added to the timeline, the video clips appeared as 1 contiguous clip as in the first image i posted.
When i went to work today I noticed that when i dragged a clip from the organiser to the work area, the video took longer to appear on the timeline, I could see the progress as it was added, with lines appearing where scenes/splits are being automatically added as in the second image I posted.
I noticed first thing that the clips were appearing in the organiser window with different icons, and in some cases I could expand the clips to see all scenes that had apparently been generated automatically. All clips in the orgnaiser now appear with the same icon, and are all expandable.
If i now create a new project and use one of the original clips that originally appeared as 1 contiguous clip on the timeline, it is now split automatically, as with the later clips.

How to adjust local brightness and contrast in Premiere Elements 12 ?

For example, in still photo, I know how to apply Photoshop to balance the brightness/contrast between a bright windows facing garden and people chatting in living room next to the bright windows. Just wondering if APE 12 is able to balance the local brightness/contrast in video editing, and how ? or I have to go for Première Pro ?

angus-y
Do you currently own or have any version of Premiere Elements, and what computer operating system is involved?
Assuming your interest to be in Premiere Elements 12 on Windows 7, 8, or 8.1 64 bit....
Export workspace/Adjust Tab/Adjustments Palette/and a variety of panels including Lighting.
The panels are:
Smart Fix
Auto Smart Tone
Color
Color (RGB)
Gamma Correction
Lighting
Temperature and Tint
The Lighting options are as shown in the following screenshot
Under the fx Effects tab in the Expert workspace, you may be interested in
Advanced Adjustments category/Image Control with its options for Brightness, Contrast, Hue, and Saturation
or
Advanced Adjustments category/Shadow/Highlight
Once you apply the effect, you can edit it in Applied Effects Tab/Applied Effects Palette/and expanded Panel for the effect.
If you do not have Premiere Elements 12 already, you may want to download and install the free 30 day tryout to determine if the program is compatible with your computer and meets your video editing needs.
The following Adobe document Effects Reference may be of interest. Although written with version 11 model, many of the effects are applicable to version 12 as well. Just be careful if you are a Mac user. There are several Windows Only features.
Adobe Premiere Elements 11 * Effects reference
ATR

How do I obtain more movie themes for Premiere Elements 12?

My church had a farm-themed Vacation Bible School this summer and we just purchased Premiere Elements 12 to create the DVD for it, but it doesn't appear to have anything remotely close to a farm theme. Is it possible to obtain additional movie themes? If so, how do I go about doing that? All help is greatly appreciated since I am new to Premiere Elements 12. Our last version was 2. Thank you!

Southside Church
There are no additional Movie Menus available from Adobe.
1. You can customize the Adobe Movie Menus in the Movie Menu customization area of the program...replacing video/still background and adding/replacing audio. There are also modifications that can be made to text and buttons, etc.
Adobe Premiere Elements 11 * Creating disc menus
2. You can edit existing Adobe Movie Menus at the .psd level or create new menu for the start with Photoshop CS or higher.
Some ideas can be found
http://www.atr935.blogspot.com/2014/02/pe-adding-movie-thumbnails-to-disc-main.html
ATR Premiere Elements Troubleshooting: PE: Scene Menu Customization/Decreasing Existing Scene Buttons Per Page
ATR Premiere Elements Troubleshooting: PE11: Full Background Replacement Faux Widescreen Disc Menu
You would do better to customize an existing Adobe design from within the project.
Please review and consider the above and then we can decide what next. We can help you with a personalized step by step written into your thread if necessary.
Thank you.
ATR

How do I correct random audio pops in Premiere Elements 13?

Similar Messages

Maybe you are looking for