How do I correct the "dates" for events

When I upgraded to iPhoto 8 some of my photos had incorrect dates on them [my camera was set incorrectly - operator error ]. I have corrected the dates using the iPhoto Photos ==> adjust time and date feature and all the photos are correct and wht event info window shows the correct date range.
BUT the date range under the event still shoes the old, uncorrected date range and the event sorts into the old incorrect position in the event window.
How do I get iPhoto to see that I have corrected my error and go along with the correct date range.
Larry Nebel

I have the same problem -- over 70 events from 2003 to 2007 (though that's only a fraction of all the events from that time period) all with event dates in 2001 or 2002. Tried creating a new event with a 2006 picture in an event dated 2001, and it got the correct date, but then when I moved all the others from the old event into the new event, the start date on the new event reverted to 2001 again. I looked at every picture in the event and every one has a 2006 date -- no 2001 dates anywhere. Get Info on the events showed no original date, but even after a Batch change to give them 2006 dates, the event is still dated and sorted in 2001.
Then tried again creating a new event, this time moving the photos one by one into the new event. This time the event date did not revert to 2001 -- all stayed in 2006, and the event retained a 2006 date, and sorted out into the right place among all events. So, it's as if there's some hidden, incorrectly dated aspect of the event that's selected and moved when you do a Command+A to select all photos (though I have no hidden photos yet), but you can avoid it by moving them one by one. Not a great solution, but better than nothing!

Similar Messages

  • I've just imported photos that are misdated and appear out of order in my events. How can I correct the dates on these events so they appear properly?

    I've just imported photos that are misdated and appear out of order in my events. How can I correct the dates on these events so they appear properly?

    The one iin the Photos ➙ Adjust Date and Time menu option:
    checkbox below:

  • HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS

    Hai Frnds,
    i Attend an interview they asked this questions can u know the answeres . tell me .
    In File to file scenario how can we reprocess records which failed records.
    HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS
    Thanks in advance
    thahir

    Hi,
    Refer these links:
    this might help you
    Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
    Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
    validating against schema file for the output XML file
    Informing the sender about bad records
    Regards,
    Nithiyanandam

  • How do I get the data for this one?

    CF 7, SQL Server 2005
    I will try and explain this as clearly as possible, let me
    know if I failed and I will attempt to clear it up.
    The application keeps track of orders as they go through
    phases of production. Lets assume there are two phases of
    production, phase1 and phase2 with 3 statuses in each phase, new,
    open, complete. (depending on the phase an order can be in more
    than one phase at once.)
    There is a phase_log table which is a reference table that
    has a row for every time the order's status changes.
    Lets say the row in the phase_log table looks like this:
    phase_logID | OrderID | PhaseID | StatusID | etc...
    The main page will have a table for each phase, showing a
    list of the orders that currently have rows in the phase_log table
    for that phase. The kicker is, I only want to pull one row (the
    latest status change which will consequently be the highest status
    ID) for each order per phase.
    once I pull the data I guess I can populate a struct or
    array, but I am new to this and I can't figure out how to get the
    query/s I need to get it.
    Any help is appreciated,
    Thanks

    select phase_logid, orderid, phaseid, etc, max(statusid)
    status
    from yourtables
    where whatever
    group by phase_logid, orderid, phaseid, etc

  • How we can upload the data through BDC for transaction J1ID

    Hi guru
    How w can upload the data for Transaction J1ID.In this we want to upload the data for Customer Excise details. I want to upload the data on behalf of Customer (KUNNR) becasue customer is a primary KEY. Table name: J_1IMOCUST
    Fields. 11 Fields.plz provide some code logic.
    KUNNR     J_1IEXCD     J_1IEXRN     J_1IEXRG     J_1IEXDI     J_1IEXCO     J_1ICSTNO     J_1ILSTNO     J_1IPANNO     J_1IEXCICU     J_1ISERN

    Hi,
    I dont see any difficulties in doing BDC upload for J1ID, You have to record by giving the New Entries button and then enter all the details of customers using table control technique.
    SEARCH SCN for Table Control in BDC
    Regards
    Karthik D

  • Validate the data for SAP system

    How do you validate the data for SAP receiver system (RFC or IDOC adapter)?
    It is necessary to recognize does exists reference object or does field has the right value.
    Do you validate it in BPM or you handle  application/technical acnowlegment? Or Messaging monitoring is enough for your requirements.
    In case of ABAP Proxy will it enough to catch Fault Message in order to define what happens?

    Hi,
    there are two different kinds of validations:
    syntactical validation (length and data types of fields etc.) and semantical validations (correct customer in order, allowed number range etc.)
    From a theoretical point of view, only the first kind should be carried out in XI, all semantical validations should be part of the backend inbound processing. And indeed for IDocs and RFCs you will get according error messages in the backend. If you call proxies, you will need to code that yourself.
    In General i'd implement syntactical validations in XI, if more a necessary then XI already carries out (e.g. mandatory fields filled). For data validations i would rely on the backend, meaning for IDocs you should look into using ALEAUD IDoc, which will return any error messages during IDoc inbound processing. For RFCs you can have Exceptions defined which will translate to a negative application ACK.
    Regards
    Christine

  • How we can see the data related to finance ??

    Hi Gurus,
    I have attend for one interview and faced one question is that how can we see the finance related data in r/3?
    they asked the same question.
    can you please let me know how we can see the data for perticular module like HR,FInance...
    Points 'll be assigned..
    Regards,
    Syam

    For Finance the standard datasources are
    0FI_GL_4
    0FI_AR_4
    0FI_AP_4
    Go to R/3 lbwe
    select these datasources
    click on manage
    you will get a window with fields. here in the right hand corner there is a drop down which giives table names
    OR
    Goto RSA3 and give the datasource name

  • How to correct the data in the psa table?

    1Q. There are lot of invalid character in the infopackage of say 1million records. it takes lot of time to check each and every record in the data package(PSA)and correct it. i think there is an efficient way to reslove this issue that is going in the PSA table to correct all the records. is it right, if yes how to do it?
    2Q. If say there are 30 data packages in the request and only data pacakge 25 has the bad records. if i correct the data in the PSA and push it to the data target, its gone process all the data packages one by one that takes lot of time and delay our process chain job that has depedency on the load. can i just manually process this data package only. if yes how to do it?
    3Q. when i successfully correct all the bad records in the data package and push it from the PSA. the request dont turn to status green and have to manually turn this request to green in the data target after i verify all the data packages have on bad records and it is a delta update. is my process right? as it is a delta what are the pitfalls i have to watch for? and the next step after this is compress the request this is very dangerous because this basic cube have lot of history and it will take a long time probably weeks to reload it. how to take precuation before i turn it to stutus green in the data target?
    Thanks in advance! and i know how to thank SDN experts by assining points.

    Hi,
    1Q . Update the invalid chars in the filter table using tcode RSKC and also write a ABAP routine to filter out the invalid characters.
    2Q. For the incorrect data packet, you can right click on the data packet in the monitor details tab and say update manually. That way you don't need to reload the entire request again.
    3Q. When you reload the request or update individual data packet again, the request should automatically turn green. You don't have to turn it green manually. The pitfall is, if you turn a delta request green, you have chances of losing data and corrupting the delta. Best practise is never turn a request green manually.. Even if you compress the requests, you can use selective deletion to delete the data and then use an infopackage with the same selections, that you used for deletion to load the same data back.
    Cheers,
    Kedar

  • How do I access the data saved on my time capsule?  for example, if i try to view my photos it tells me that i have 2.4gb of photos and gives me the option to "view with iPhoto"....but when i click on "view with iPhoto" nothing happens...  thanks!

    how do i access the data stored on my time capsule?  for example, if i try to view a photo, i get the option to "view with iphoto" but when i click on "view with iphoto" nothing happens.  i'm having similar trouble openning up movies, music, etc.  it appears as though the files exist / saved on the time capsule (because i can see how much storage they consume), but i can't open them.  thanks!

    Unfortunately, Apple removed the feature to "browse backups" in Time Machine backups of iPhoto a few years ago.
    You have to restore the entire iPhoto library to a separate location to be able to "see" it, and then choose the specific images that you want use.
    For complete details, see #15 in Pondini's excellent support document Time Machine -- FAQ.  Check the information in the pink box there.
    Frequently Asked Questions

  • How to get the date for the first monday of each month

    Dear Members,
    How to get the date for the first monday of each month.
    I have written the following code
    SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
    But it look bith complex.
    Abhishek
    Edited by: 9999999 on Mar 8, 2013 4:30 AM

    Use IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
    select  sysdate current_date,
            trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
      from  dual
    CURRENT_D FIRST_MON
    08-MAR-13 04-MAR-13
    SQL> Below is list of first monday of the month for this year:
    with t as(
              select  add_months(date '2013-1-1',level-1) dt
                from  dual
                connect by level <= 12
    select  dt first_of_the_month,
            trunc(dt + 6,'iw') first_monday_the_month
      from  t
    FIRST_OF_ FIRST_MON
    01-JAN-13 07-JAN-13
    01-FEB-13 04-FEB-13
    01-MAR-13 04-MAR-13
    01-APR-13 01-APR-13
    01-MAY-13 06-MAY-13
    01-JUN-13 03-JUN-13
    01-JUL-13 01-JUL-13
    01-AUG-13 05-AUG-13
    01-SEP-13 02-SEP-13
    01-OCT-13 07-OCT-13
    01-NOV-13 04-NOV-13
    FIRST_OF_ FIRST_MON
    01-DEC-13 02-DEC-13
    12 rows selected.
    SQL> SY.

  • How can I check the date of purchase for my MacBook Pro?

    I need to fill out a claim in order to get OS X Mountain Lion and I need the date of purchase. I have tried putting in the serial code under check your service and support coverage but it just gave me a vague statement thatit was purchased mid 2012. Could someone please tell me how I can check the date of purchase?

    Well, correction, just checked mine...
    Tells you exipry date of warranty, simply take 1 year off of this or 3 if you have AppleCare.
    There is your purchase date.

  • The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

    Hi ,
    We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and  as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
    We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
    "The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
    this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
    Please let us know reason behind this error message.
    Thanks,
    Mruduala

    You are kidding?  It took me about 3 minutes to scroll down on my tab to get to the triplex button!
    Habe you read the error message? 
    Quote:
    java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
    Check the trigger and it should work again.
    Timo

  • How to populate the data for additional fields in custom report of fbl5n tr

    hallo friends,
    i ha ve to add some fields to the output of custome report of transaction FBL5N.
    Till now i have only added the fields to the output.
    Now i have to write the code to populate the data for those fields in the program.
    1.     Customer Credit Group(ACM/RCM): (Table: KNKK; Field Name: VKORG )
    2.     Credit Representative Group: (Table: KNKK; Field Name: SBGRP)
    3.     Customer Account Number(CAN#): (Table: KNKK; Field Name: KNKLI)
    4.     Alternative Payer(ALTP#) : (Table: KNA1; Field Name: KUNNR)
    5.     Risk Category: (Table: KNKK; Field Name: CTLPC)
    6.     Credit Info Number: (Table: KNKK; Field Name: KRAUS)
    7.     Rating: (Table: KNKK; Field Name: DBRTG)
    8.     Payment Index: (Table: KNKK; Field Name: DBPAY)
    9.     Credit control area: (Table: KNKK; Field Name: KKBER)
    10.     Company code: (Table: KNB1; Field Name: BUKRS)
    11.     Sales Organization: (Table: KNVV; Field Name: VKORG)
    These are al fields i have to populate in the program..
    MY ATTEMPTS:
    I tried getting the data for KNKK table by GET KNKK ,but it is giving some garbage values...
    And Logical database used here is DDF,and i have to add the VKORG of KNVV too...but KNVV is not there in DDF...
    Can anybody tell me how should i proceed..
    thanks in advance.

    Thnx Andreas,
    i have following doubts again..
    I have to add sales organisation field to the selection screen...(this is given in the req.)
    now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
    And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

  • How to get the date for the last day of a week?

    Is there a easy way to get the date for the last day of week?
    eg a week starts on monday and end on sunday
    January 11, 2005 is the start date for the week
    January 17, 2005 is the end date for the week
    or
    say
    February 26, 2003 is the start date for the week
    March 5, 2003 is the end date for the week
    I just need a simple way of figuring that out....
    I figured out how to get the start date for the week but just can't get the latter..
    formatting of the date is not of a concern.. that I know how to do
    thanks in advance

    How about something like the following?
         Calendar someDay = new GregorianCalendar(2005,0,11);//2005 Jan, 11
         //Note above that January is 0, not 1, as counting starts from 0.
          someDay.add(Calendar.DAY_OF_MONTH,6); //add 6 days
         java.util.Date  lastDayOfWeek = someDay.getTime();
         //If someDay was the start of a week, lastDayOfWeek should now be
         //the last day of that week.
         System.out.println(lastDayOfWeek.toString() );

  • How to know last access date for the schema's

    Dear all,
    could u plz tell me How to know last access date for the schema’s
    Regards,
    Srinivasa rao.P

    Srinivas,
    could u plz tell me How to know last access date for the schema’s
    In Oracle, we don't access schemas but schema objects.And this informationis not kept anywhere persistantly.As Amit also mentioned,if you do need it,you have to enable Auditing.
    Aman....

Maybe you are looking for