How do I correct the text in a file made by another person

I have a file made by a friend as a jpeg file whidh I have imported in photoshop 5. I would like to make some changes in the text in the file. How do I do it/

Paint over the existing text to obliterate it and create new text over it.
The text in a JPEG is rasterized and non-editable.
Ask your friend for a layered TIFF or PSD file in which the text is still in vector form on its own editable layer.

Similar Messages

HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS

Hai Frnds,
i Attend an interview they asked this questions can u know the answeres . tell me .
In File to file scenario how can we reprocess records which failed records.
HOW CAN U CORRECT THE DATA IN UR FILE WHICH CONTAINS 1 LAKSH RECS
Thanks in advance
thahir

Hi,
Refer these links:
this might help you
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
Generic Approach for Validating Incoming Flat File in SAP XI - Part 1
validating against schema file for the output XML file
Informing the sender about bad records
Regards,
Nithiyanandam

How can I correct the position of the text in TEXTITEM?

In TEXTITEM Box, some texts are placing on the top.
The forms version is 6i.
How can I correct the position of the text in TEXTITEM?

Hi
good thread to this problem
Vertical justification for Text Item
Thanks
asp

I've recently downloaded CS4 ( Illus. Photoshop, and Indesign) on my Mac Book pro. Only these apps appear as low resolution. All other imagery, text etc... appear fine on my system. How can I correct the pixelization of the Adobe products?

I've recently downloaded CS4 ( Illus. Photoshop, and Indesign) on my Mac Book pro. Only these apps appear as low resolution. All other imagery, text etc... appear fine on my system. How can I correct the pixelization of the Adobe products?

No. If you want full compatibility with that display for all Adobe apps you’ll need to move to Creative Cloud.

How do I get the text to flow throughout more then one page.

Hello,
I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
I could always send the file to someone to see if they can figure it out.
Thank you,
Natalie

Thank you so much !
but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
Natalie
Date: Wed, 12 May 2010 07:53:12 -0600
From: [email protected]
To: [email protected]
Subject: How do I get the text to flow throughout more then one page.
Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
Thanks
Srini
>

How do I Expand the Text Box in Mail Stationery?

I have a question about using stationery in Mail. Is there anything I can do to make the text box in certain templates to hold more content? It seems that, in some templates (like Bamboo, for example), the text box expands automatically as more content is keyed in. Yet, in the Tack Board template, for example, the text box does not expand beyond what seems to be a fixed length for content. How can I get the text box in Tack Board to expand for additional content?

Please check text input state defined , also if the form is inserted in any container then try to test out the form with different text input boxes in a new page.
Additionally , check the mid-hieght of text inserted in frame.
Thanks,
Sanjit

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

In popup step how do I get the "text on the button" in the report rather than button index?

(1)
How do I configure the POPUP step in "SEQ MAIN.seq" to execute the second
step (IS OUT PUT IS 20?) in "SEQ 1.seq" when "IS OUT PUT IS 20?" button
hit and execute the third step (IS OUT PUT IS 30?) in "SEQ 1.seq" when "IS
OUT PUT IS 30?" button hit.
(2)
In popup step how do I get the "text on the button" in the report rather than button index?
File attached
Attachments:
test_stand.zip ‏32 KB

The handle to the Step.Button1Label gets you the data, but there are several ways to get it into the actual report.
The easiest is to use the reporttext.
In a post expression, you can use something like
Step.Result.ReportText = Evaluate("Step.Button" + Str(Step.Result.ButtonHit) +"Label")
and then the default report generation will include it in the report. Otherwise, you need to get the text into the Resultlist by various means (check the user manual, or the TestStand II customisation course) and handle the report generation yourself inside of the appropriate sequence in the process model.
Just my 2cents
S.
// it takes almost no time to rate an answer
Attachments:
IncludeButtonTextInReport2_0.seq ‏18 KB

How can I program the text fields in my email forum to have rounded corners

How can I program the text fields in my email forum to have rounded off edges or corners.
this is the code im using.
// insert code here// insert code here// prepare email field
var email = sym.$("email")
email.html("Enter your Email: ");
inputEmail = $('<input />').attr({'type':'text', 'value':'', 'id':'email'});
inputEmail .css ('font-size', 14);
inputEmail .css ('width', 350);
inputEmail .css ('background-color', '#4e4e4e');
inputEmail .appendTo(email);
// prepare topic field
var topic = sym.$("topic");
topic.html("Topic: ");
inputTopic = $('<input />').attr({'type':'text', 'value':'', 'id':'topic'});
inputTopic .css ('font-size', 14);
inputTopic .css ('width', 350);
inputTopic .css ('background-color', '#4e4e4e');
inputTopic .appendTo(topic);
// prepare message field
var message = sym.$("message");
message.html("Message: ");
inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});
inputMessage .css ('font-family',"Arial,Helvtica,sans-serif");
inputMessage .css ('color',"#ffffff");
inputMessage .css ('font-size', 14);
inputMessage .css ('background-color', '#4e4e4e');
inputMessage .css ('box-shadow', '#4e4e4e');
inputMessage .css ('width', 350);
inputMessage .css ('height', 150);
inputMessage .appendTo(message);
var submitBtn = sym.$("btn");
submitBtn.html("Submit");
submitBtn.css("text-align", "center");
submitBtn.css("font-size",14);
submitBtn.css("font-weight","bold");
submitBtn.css("color","#ffffff");

Try this: inputEmail.css ('border-radius', '25px');
attachment
more details

How can I make the text bigger in iCal?

How can I make the text bigger in iCal? I've looked at Preferences and View.

Sorry, did not see that you are using 10.6.7

HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. MY question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this aren't working

HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. My question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this, such as using turning off the SMS preview under the "passcode lock", well that option no longer exists, or if it does, I'm somehow missing it.
When I go to the "messages" setting under settings on my phone, I still don't see an option of turning it off.
If I can just get the name of the person sending the message, as I had it before, I'd be happy.
Help!

That option still exists in Settings > Notifications > Messages > Show Prview (OFF) and View in Lock Screen (ON). Here's how to configure your Notifications and Notification Center for iOS 5: http://iphone-and-i.blogspot.com/2012/01/how-to-customize-notification-center-in .html

I recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?

I Recently updated the software on my MacBook Pro. Now, my computer no longer recognizes my external hard drive. Could this be related to the software update and, if so, how do I correct the problem?

Ari343 wrote:
No, the external hard drive does not show up on Disk Utility. I don't have another computer to try it on.
Perform a PRAM reset:
http://support.apple.com/kb/ht1379
Have you tried all the ports?
Have you tried with a different cable?
Have you tested all the ports with other devices to see that they are functioning?
Ciao.

Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book mo

Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book module? I can click into any other text window and edit and change attributes but I am locked out of editing text when it comes to the spine of the book. I spoke to Blurb support and they referred me to Adobe. I spent 45 minutes with support here - no one knew. I am still waiting for a call back with an answer... not holding my breath as it's been a few hours now. HELP!!!

Thanks for your reply John. I have experienced all the fiddly aspects you mentioned - these are attributes and although changing them requires the skill of a surgeon's hand - it's the actual editing of the text I can't seem to access anymore. The box just won't allow me to do anything except change attributes. Does that make sense? And it's only on the spine where I am having this issue. Puzzled! I have even rebooted the program and just now the computer - to no avail.

How do I increase the text size when I click the T button in Adobe Reader

On some documents in Adobe Reader when I wish to enter text using the T button, I am given the option of the font and size of text. However, on other documents, a very small text size is used with no option to change it. How can I change the text size or bring up the option window?

Press Ctrl+E to open the properties bar, where you could set the font size.

How do you correct the merging of contacts, calendars, etc with other members of your family on your account?

How do you correct the merging of contacts, calendars, etc with other members of your family on your account?

Wow!
I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
If nothing else this totally highlights how complicated BT have managed to make their packages.
A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth.

How do I correct the text in a file made by another person

Similar Messages

Maybe you are looking for