How do I correct video/audio hiccups?

Video and Audio are hiccupping. Is this a simple settings fix or do I need a Genius to take a look? This is during streaming videos from Netflix or other sites. Is it a networking issue or internal audio/video?

Are you dragging the videos on existing composition?
Delete all compositions in project panel.
Then drag the footage into timeline, the composition will automatically take the dimensions of footage.
Alternatively, select the clip and press ctrl+alt+F. it will snap the footage to the composition dimension.
Hope it helps.

Similar Messages

How to make best videos/audios for Creative Zen/Zen Vision W/Zen Vision M/Z

4Easysoft Creative Zen Video Converter is an all-in-one Video Converter for Creative Zen software with high output quality and powerful video editing functions, which can help all the zen users to make the best video/audio effect.
First of all, let’s make clear what kinds of videos/audios can get the best effect in the zen players.
Video:
MPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-1, and MPEG-2 are supported, but must be transcoded with the included software.
Audio:
MP3, AAC, WMA, WAV, and Audible 2, 3, and 4 formats.
Settings:
Video resolution: 320×240; Video Bitrate: 500 kbps; Audio Bitrate: between 96 to 128 kbps.
Then, let me show you how to make a full use of this powerful converter.
Preparation:Download and install 4Easysoft Creative Zen Video Converter
http://www.4easysoft.com/guide/creative-zen-video-converter/main.jpg
Step 1: Run this software and add video/audio files.
Step 2: Select output video format from the profile drop-down list.
Click the “Profile” button to select the output video format from the drop-down list button.
Step 3: Customize output settings.
Click “Settings” button in the output settings area, you are allowed to customize the output parameters, specify output folder and select output format.
Step 4: Start conversion
Click “Start” button on right bottom of the main interface, you can begin the conversion. All the tasks of conversion will be finished at fast speed and high output quality.
http://www.4easysoft.com/guide/creative-zen-video-converter/steps.jpg
Tips on editing videos:
1: Capture your favorite picture.
Just click the “Snapshot” button to save your favorite image.
2: Merge videos into one file.
Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)
3: Select preference
Click the “Preference” button and a dialog pops up, you can select the output destination, the Snapshot foler, the format of the snapshot image. You can also choose to shut down your computer or do nothing after your conversion. You can also select the CPU usage.
4: Trim video
You can get any clip of your video and put it on your zen.
5: Crop video
You can crop your video by selecting your video mode, setting crop values, or drag the frame.
http://www.4easysoft.com/guide/creative-zen-video-converter/tips.jpg
Ok, just enjoy movies and music with your Creative Zen player now!
More useful tools:
MP4 Converter is a powerful MP4 Video Converter which is designed to convert almost any video formats to MPEG-4 standard formats; WMV Converter provides perfect solution to convert common video formats to WMV with the best quality of picture and sound; Apple TV Video Converter is the excellent Apple TV converter software to convert all video files such as AVI, MPEG, WMV, MP4, MOV, RM, ASF, 3GP, VOB, etc, to Apple TV movies.
Edited by: user11254370 on 2009-6-9 下午11:58

Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

How can I play video/audio to an AV Receiver?

I have my iMac connected to a Denon AV receiver and the properties of the AV receiver show up under display properties in system preferences. I have the obtion to mirror the display but when I do, nothing comes through on my home theatre system.
I just cannot figure out how to get the video and audio to play on it now.
The Denon is connected via a mini display port/HDMI cable.
Any help would be greatly appreciated.

Not sure I fully understand the problem. Does it not work when you take it out of mirrored and run the two displays in extended display mode (use Arrangment to arrange the two monitors)? Of course you need to chang your Sound preferences to use the hdmi conneciton as well.

How do I correct random audio pops in Premiere Elements 13?

Please help me with this audio issue! I hear occasional pops (skipped words, not smooth narration) in my edit. I shot the footage with a Rode video mic, but have not had this problem with this microphone before, and furthermore the pops appear not on the same marks every time, so it is not embedded in the original footage and therefore I conclude that the original audio quality is fine. At first I thought it was a yet-to-render issue, but after rendering it (while editing), and ALSO after publishing it to my computer to watch a version there, I still here random pops. Once I published it to my computer, the pops were stuck to specific points in the edit, but this is not so when I watch my edit in Elements, the pops are always in different places, and often will not be there when I roll back to try to immediately listen again for a just-heard pop.
Can anyone help with this? How can I smooth out my audio?

Hi Steve,
Thanks for getting back
I used a Samsung SMX-F40BP/XEU "Handycam" recording from the the image projected on to a screen. This produced mp4 video files on an SD Card, H.264/AVC Format with AAC Audio
I then dragged and dropped the raw video files on to the PC hard drive, and added the folder to the Adobe Organizer.
When creating the projects I
1) Create a a New Project PAL Standard DV 48KHz to match the 4:3 aspect ratio of the original film
2) Drag the video/clip I intend to work with from the organizer window in to the work are of Adobe Premiere Elements 11.
When I was originally doing this yesterday for the first 15 clips, when added to the timeline, the video clips appeared as 1 contiguous clip as in the first image i posted.
When i went to work today I noticed that when i dragged a clip from the organiser to the work area, the video took longer to appear on the timeline, I could see the progress as it was added, with lines appearing where scenes/splits are being automatically added as in the second image I posted.
I noticed first thing that the clips were appearing in the organiser window with different icons, and in some cases I could expand the clips to see all scenes that had apparently been generated automatically. All clips in the orgnaiser now appear with the same icon, and are all expandable.
If i now create a new project and use one of the original clips that originally appeared as 1 contiguous clip on the timeline, it is now split automatically, as with the later clips.

How to capture the video/audio?

Hi, I would like to ask how may I cature the video by this Premiere pro CS5, use USB or special video capture card?

Computer does not necessarily need firewire, all depends on the camera.
SDI an HD are two different concepts.
http://en.wikipedia.org/wiki/Serial_digital_interface
http://en.wikipedia.org/wiki/High-definition_video
You probably mean SD (standard definition)
http://nl.wikipedia.org/wiki/Standard-definition_television

How do I adjust video "Audio/Video (Adjustment Disabled)"?

When opening a video file, from my Canon Eos 7 d, the adjustment field is grey and it says: Audio/Video (Adjustment Disabled). And Im not in Quick Preview mode.

The only thing I don't like about sending it to an external editor is that it creates another copy of an already large file - similar to what it did before when you'd roundtrip to photoshop. For more extensive editing of video, that's fine, but for simple things like rotating a video, it would be nice to not have to create a whole new copy.

How do you Rearrange Video & Audio Tracks?

I need to know how to arrange the stacking order of them

If you're asking if you can actually move the track so that track 1 appears above track 2, don't think you can do it. You can move the contents of the track pretty easily as mentioned in the other answer.
To add to Nick's post, you can add a track directly above a specific track by control clicking on the patch panel of the appropriate track (I think) and choose add track. And you can move a clip or series of clips directly above or below if the target track is empty in that section by selection it and then option-up (or down).
Message was edited by: Michael Grenadier

How do I replace video/audio clips in a timeline?

In After Effects I can select Replace Footage in the File menu. How do I do this in Encore? Looks like I could add a new clip to the existing timeline, then delete the old clip. Is there another/better way to achieve this? Running CS5 on a MacPro.

Do you not have replace footage when you right click a clip?

How to correct NO AUDIO when I convert .wmv in iVI converter then download to Final Cut Pro?

How do I correct NO AUDIO in my Final Cut Pro event after converting a .wmv file using iVI converter?

Suggest you contact the converter's developer.
Generally speaking, Flip4Mac is considered the gold standard for converting WMV to something that is Mac-friendly,
Russ

How to split a video clip into two separate clips?

Whenever i enter the key word to search for split, it always shows me how to do split edit, or split screen. I do not want that. I just need to know, how to cut a video/audio clip into two pieces, so that I can cut one of them out of the time line....
Could somebody help....
Thanks

I have a sandwich. I have been searching how to split the sandwich but it seems you don't split a sandwich. Someone said look in a draw for a tool or something!
Wow.
There are lots of ways to do what you're asking besides what has been said. You can double click the clip in the Browser. Set In & Out points in the viewer and add the Clip to the sequence. No need to split or cut anything in the sequence.
You really need to learn a bit more before you continue cause this is a pre-noob question. I don't really know how to categorise it.

What application for capturing Video+Audio?

Hey,
I've recently installed (with great success) the WinFast 2000 XP RM video capturing card (according the instructions in the wiki).
I can now watch TV using TVTIME or KDETV.
Question is, how can I capture video + audio, to a .avi file?
Note that the card doesn't have an audio input, and that the audio input is connected
to the line-in of my onboard sound card.
I got some instructions from this page: http://forum.videohelp.com/topic307679.html
But, when trying to issue:
mencoder -tv norm=PAL:driver=v4l2:width=720:height=576:input=2:fps=25 tv:// -oac lavc -ovc lavc -of mpeg -mpegopts format=dvd -vf pp=lb/ha/va/dr,hqdn3d,harddup -srate 48000 -af lavcresample=48000 -lavcopts vcodec=mpeg2video:vrc_buf_size=1500:vrc_maxrate=8000:vbitrate=7000:keyint=15:acodec=mp2:abitrate=192:aspect=4/3 -o capture.mpg
I didn't get any sound at all (though the video capturing worked perfectly).
Any help would be appreciated,
Thanks
fiod
Last edited by fiod (2008-05-18 16:06:32)

Ok. The transcode command line is no fun and transcode doesn't work with alsa, so you'll need to have alsa-oss installed. I use v4lctl (part of the xawtv package) to set the video card input and I capture to mjpeg rather than mpeg2, because it's better for editing, with ac3 audio, like this:
#!/bin/bash
# Generate recording filename
if [ -z "$1" ]; then
TMPFILE="tmp-`date +%F-%X`-mjpeg.avi"
else
TMPFILE=$1
fi
# Set capture card
v4lctl -c /dev/video2 setinput Composite1
transcode \
-u 256,2 \
-x v4l2=resync_margin=1:resync_interval=250:overrun_guard=1,v4l2 \
-g 720x576 \
--import_asr 2 \
-i /dev/video2 \
-H 0 \
-p /dev/dsp1 \
-e 32000,16,2 \
-E 48000,16,2 \
-n 0x1 \
-N 0x2000 \
-b 192\
-J resample,smartyuv,mask=lefttop=0x6:rightbot=720x564,hqdn3d=luma=4:chroma=3:luma_strength=6:chroma_strength=4,pv=cache=30 \
-y ffmpeg \
-F mjpeg \
-o $TMPFILE
exit 0
(The "-J mask=lefttop=0x6:rightbot=720x564" hides some vhs artefacts.)
Of course, my card is different to yours, so you'll need to adjust the audio device (/dev/dsp?) and video device (/dev/video?). Use "v4lctl -c /dev/video? list" to get the possible options for your card, like this:
[david@darkstar ~]$ v4lctl -c /dev/video2 list
attribute | type | current | default | comment
-----------+--------+---------+---------+-------------------------------------
norm | choice | PAL-DK | PAL | PAL PAL-BG PAL-I PAL-DK NTSC SECAM SECAM-DK SECAM-L SECAM-Lc PAL-M PAL-Nc PAL-60
input | choice | Televis | Televis | Television Composite1 Composite2 S-Video
audio mode | choice | mono | mono | mono stereo lang1 lang2
bright | int | 128 | 128 | range is 0 => 255
contrast | int | 68 | 68 | range is 0 => 127
color | int | 64 | 64 | range is 0 => 127
hue | int | 0 | 0 | range is -128 => 127
volume | int | 15 | 0 | range is -15 => 15
mute | bool | on | off |
Mirror | bool | off | off |
Invert | bool | off | off |
y offset o | int | 0 | 0 | range is 0 => 128
y offset e | int | 0 | 0 | range is 0 => 128
automute | bool | on | on |
Oh, and my ~/.transcode/ffmpeg.conf contains:
[mjpeg]
precmp = 2
cmp = 2
subcmp = 2
mbd = 2
dia = -2
predia = -2
Last edited by azleifel (2008-05-18 20:37:31)

Here is a Tutorial on How to sync Multiple Video and Audio Clips

Check out my Tutorial on How to sync Multiple Video and Audio Clips http://vimeo.com/28972315

Very true ! My main point was to show how easy it was to sync. I still think apple has a way to go to make this a great tool. It was fast to edit but when I want to send somthing to AE 5.5 it was a nightmare. I do I love how it organizes keywords and the color correction tools are good if you want to do it your self (check out this site http://www.colorgradingcentral.com/final-cut-pro-x-color-grading-table-of-conten ts ) it will be a great program if apple listens to all the comments but does not make it too complicated the you cant create quickly.

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

How can i stream video and audio from macbook air to my tv?

how can i stream video and audio from macbook air to my tv?

Wirelessly: you need an AirPlay - enabled device such as an AppleTV.
Wired: if your TV has an HDMI port, you need a Thunderbolt to HDMI adapter such as this one:
Mini DisplayPort to HDMI® Adapter w/ Audio Support
If your TV does not have an HDMI port you will need a converter that will convert HDMI input to whatever input your TV requires.

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

How do I correct video/audio hiccups?

Similar Messages

Maybe you are looking for