How do I create a bootable snapshot image of Lion?

How do I create a bootable snapshot image of Lion? In the past, I used disk utilities - restore to create a copy of current hard drive on an external drive. If there was a problem, kids could boot to external and work until internal drive was fixed. This proved to be a great solution. On a new Macbook Pro with Lion, I get an error when I try. It says to do a restore from the recovery disk, but the recovery disk says it is a limited function OSX. I would like a full OSX so they can continue to work and even copy files over if the internal disk is suffering intermittent failures enough not to boot but not enough to keep from copying files. A few years ago one of the kids had a disk/boot failure duing finals but was able to boot from the external hard drive, copy over what he needed and access the internet so that he could finish the exams. Time machine is great, but there are instances where you need a quick fix to keep going until the new hard drive arrives.

I do not run Windows, so I have no idea how to handle that type of situation.
But, just to be clear: disregarding Windows, the recovery option downloads the OS and installs it. Technically, that is not a clone unless you copy the installer and create a bootable OS with it. A clone is an exact copy of your system including all your apps, user settings, files, etc, etc and will exist on an external hard drive in addition to your system on your internal - that is done with CCC or SuperDuper.
And, a GUID partition is created in Disk Utility > click on the drive > choose Partition > choose a layout other than what you now have > there will be a clickable Options button below. Click on that and you can choose GUID. Note: partitioning your drive will erase everything on it.

Similar Messages

How can I create a bootable DISK IMAGE of my PB Internal Drive?

I would like to make a bootable image of my Hard Drive but without including any Free Space.
You see all I need on the image are the OSX and the programs, NOT the 60GB of Free Space. Disk Utility however wants to create a 80gb image which includes 60GB of Free Space.
I would like to use the Bootable image as a source image to use with the RESTORE function in Disk Utility.
Regards

You'll need a second machine or an external HDD with Mac OS X installed on it.
For purposes of this procedure I'll be calling your machine the 'source' and the second machine or your external HDD the 'target'.
First either boot the source into target mode by holding down the 'T' key while it boots. Once you see the FireWire icon on the screen, let go of the 'T' key and plug the source into the target. If you're going with the external HDD route, boot your source of off your external HDD.
Now, select the drive of your source machine, and hit Apple-I to bring up the information pane. Down at the bottom (in the permissions area) you'll see a check box labeled "Ignore ownership..." Uncheck that.
Open up Disk Utility. Select the source drive and run First Aid and Repair Permissions on it.
Now, select the File menu -> New -> New Disk Image from Folder. You're going to want to hit that big "New Image" button, but don't. Trust me. It'll only cause trouble for you down the road.
Select the source drive as the source. You can leave everything else the same and click "Image".
Select the target as the destination. Click Save.
Wait for a couple of hours (depending on how much stuff you have).
When it's done, select the Images menu -> Scan image for Restore.
Select the disk image you just made and click "Scan".
When that's done you have a restorable image. Just use the restore tab to restore it.
I've done this literally hundreds of times and it's worked every single time.

Question about creating a bootable disk image in Leopard.

I have a Powerbook G4 that originally came with OS9, I upgraded to Tiger and recently upgraded to Leopard. The computer is running great but if it should go down what are my bootable options?
1) Boot from the install disk set then load tiger upgrade then load Leopard upgrade? then reload all my programs back on the G4?
2) Can I create a bootable disk image and save it on an external hard drive and then boot and reload everything at once? ( I guess by asking this question I really don't understand what the full scope of a bootable disk image is?) can someone explain...
Which option is better? I am also running __time machine__... what is the safest and easiest way to use time machine to get my software back together after I get the operating system up and running.
Thanks for the advice

Your best alternative is to create a bootable clone on an external Firewire drive.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Of course you can use other software for cloning and backup:
Backup Software Recommendations
My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Intego Personal Backup (Commercial)
9. Data Backup (Commercial)
For use with Leopard always be sure you use a version of the software that is compatible with Leopard.

How can i create a bootable usb sata for xp

how can i create a bootable usb sata for xp

Installing Windows XP on a portable USB hard drive is not supported.
Carey Frisch

How can I create a java.awt.Image from ...

Hi all,
How can I create a java.awt.Image from a drawing on a JPanel?
Thanks.

JPanel p;
BufferedImage image =
new BufferedImage(p.getWidth(), p.getHeight, BufferedImage.TYPE_INT_RGB);
Graphics2D g = image.createGraphics();
p.paint(g);
g.dispose();

How can I create a high res image gallery, need to have print res photos for a pressroom section.

How can I create a high res image gallery, need to have print res photos for a pressroom section.

If you want Muse to "pass through" your images and not adjust, compress, crop etc - you need to place your images in the lightbox EXACTLY at the right size, pre-cropped and prepped in Photoshop.
So if your light box is 800x600 the image you're dropping into that must be 800x600 exactly with no effects, rotation etc added to the lightbox frame. This stop Muse fiddling with your images, if they are perfect when inserted and you're not asking Muse to crop, expand, add effects etc. If it's perfect when inserted, Muse SHOULD also leave the resolution alone too, but I have not tried that one, but in theory, it should work.

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

Hi, how do I create a standalone installer for Mountain Lion, ie, download once and then no more broadband required, thanks?

Hi, how do I create a standalone installer for Mountain Lion, ie, download once and then no more broadband required, thanks?
Context is that my other computers are not mobile and I do not have broadband worth troubling for a 4GB download - so will go to Apple Store with MacBook Pro for first download.

The easiest way is to download the installer but do not open it.
Next, make a copy of it and store it where it won't get lost.
Then take one of the copies and place into the applications directory and open it to begin the installer.
This has saved me the trouble of ever having to download the installer twice, plus you can mess around with the installer and try different options without having to worry about not having a clean install file if needed.
Best wishes

How can I creat a 802.1x Profile without Lion Server? I miss the plus-button in Lion to creat a 802.1x Profile.

How can I creat a 802.1x Profile without Lion Server? I miss the plus-button in the Network Configuration (OS X Lion) to creat a 802.1x Profile.

Tried this?
http://blog.affien.com/archives/2011/03/16/802-1x-configuration-profile-on-lion- mac-os-x-10-7/

How do I create 2 Recovery partitions: one for Lion and one for Mountain Lion?

Well that is basically the question:
How do I create 2 recovery partitions: one for Lion and one for Mountain Lion?
Reason is that I would like to keep the option to return to Lion, or even better, have a seperate partition for eacht?

can I access my programs from the other partition, so I can save space ...
No, as far as I know, each one is completely separate - especially if you're dealing with two different versions of OS's.
is it possible to safely make an extra partion on a running drive (it is my main computer ...) The disk is large enough ...
how large would this have to be
I've personally never done it on a running drive - have read it's possible, but don't want to suggest it since I've never done it and wouldn't be sure about the steps. This is how I got to two partitions on my iMac:
Originally, I had just one partition with Snow Leopard. I used CCC to clone that to an external drive. Booted into that drive and used DU to partition and erase the internal. I then cloned the new clone back. Also cloned the same thing to the other partition which I then upgraded to Lion. So I had two OS's - SL and Lion. I've now decided to clone my SL to an external drive for occasional use and installed ML on that partition - so now I have Lion and ML.
There are two ways to get a "fresh" install: either download the OS again and install it on a partition of your choice or, as I've done as well, copy the installer to a safe place so you don't need to download it again. It does include whatever apps/software is included in the OS. I've designated two smaller partitions on externals as my "fresh" installs of both Lion and ML for emergency or reinstall purposes (this is my way of dealing with not having install DVDs) - I took the time to install it there and then slowly add fresh installs of my important apps (either via download or install CD) - don't bother with the little/less used stuff, a current copy of that can be downloaded if and when I need it. I don't really update those two - that can also be done if/when I need it since that'll always change.
So, yesterday, I decided I wanted to start fresh with ML - booted into my fresh install of Lion (on external), wiped the SL partition on my internal and installed Lion. Decided to download a fresh copy of the ML installer and installed that. Then ran Software Update. After that, repaired permissions. Then I methodically opened every third party app and checked for updates - installed those where necessary. After all that, I simply copied (drag 'n drop) my entire Documents folder (which contains all my important data,, photos, etc) over from another backup.
This took a while, but mostly because of the long download times; the installs weren't all that bad. I should be running a really clean system now, especially since nothing was ported over except my Documents folder.

How do you create a bootable image accessable via OPTION at boot time...

Hello. Is there a way to create a 'bootable image' of a hard drive and save on my raid and access it via the OPTION menu (hold option key at boot)? I would like to create a OSX bootable drive and then save the whole thing in a file. That way I can set up different configs and just boot into whichever I wish to use. Say, one to rescue a crashed hard drive, etc.
Information appreciated. Thank you,
--Scott
Powermac G5 'Quad' Mac OS X (10.4.6)

CCC is used to make a bootable clone. It will also make an image file that can be installed using ASR or that can be used with NetBoot. It does not make a bootable image because you cannot boot from a disk image file. The image file can also be burned onto a CD or DVD, but you will not be able to boot from it because a CD/DVD is not a writeable device, and OS X must be able to write to a startup device.
Another utility, BootCD (not yet usable with Tiger), worked around the problem by rewriting some of the startup code in OS X to force the making of a RAM disk, then moving some of the startup files to the RAM disk and designating the RAM disk as the startup device. Although BootCD will make a bootable and customizable CD using Panther, it does not work with Tiger.
Any questions?

How do i create a bootable windows 8 file on my MAC, BUT FOR USE ON MY PC

I recently got a virus on my dell PC locking me out completely from accessing windows 8 login menu. (the only option i have is to boot from an ISO windows 8, using USB or DVD). Since i can't use my PC, i need to create this Bootable option on my MAC. I have come accross this video:
http://www.youtube.com/watch?v=I3MNnbtfyzs
But it doesn't seem to work when i use this option on my PC. Help please.

Why won't you just put your Windows install DVD into your PC and power it up? You should then get an option to reinstall or repair Windows. Or, search the Internet for how to use an anti virus program from a usb stick while booting.

How do I create an Array of Images

Hi,
I'm creating a program that basically is a slideshow. It has buttons that allow the user to switch from image to image, and has some audio in the background. I was wondering how I might create an array to store the images. I'm very new to Java, so please no detail is too small. I've just started using arrays, so I'm not sure where I would store the files or how to call the images. Please be descriptive and as dumbed down as possible :)
Thanks for the help!

I like ArrayList
ArrayList<BufferedImage> myPics = new ArrayList();then just dump them in with add(myBufferedImage)
If you'e not using BufferedImages then just change the BufferedImage to Image.
to get, say the 6th image back out, then use:
myBufferedImage = myPics.get(5);the index starts at 0 and should be addressed as 0 to (myPics.length - 1)

Qosmio - How can I create a bootable OS DVD?

Hi ,
Please Help me
I have a Toshiba Qosmio laptop with Microsoft Windows Vista Ultimate .
The DVD of the operating System was attached with the laptop but now i lost it.
But i have the files that was in the original DVD
But i don't know how to make it a bootable DVD to reinstall the OS
THIS IS THE FILES
[http://9ore.net/view/3619/TTTTT.png]
PLZ HELP

Hello
The Toshiba recovery disk creator it’s preinstalled on your notebook and you can find it in the start menu in the Toshiba folder.
But this program is only available if you have the factory settings preinstalled. If you have reinstalled your notebook by using a original Microsoft disk it’s not more installed.
Normally you get the following message if you don’t have created the recovery disks:
+Important INFORMATION+
+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+
In worst case you must order a new recovery disk from Toshiba directly or from an authorized service provider.
Greets

Software to create a bootable disk image????

Hi,
I need to create a bootable image. I have a ISO file, and need to create a bootable image to install software onto one of my servers. Is there software out there for a Mac that will allow me to create a bootable image?
Thanks for any input,
Nigel

Disk Utility doesn't make for bootable images. However, the command-line utility 'hdiutil' does (use it via Terminal.app. I've made bootable Linux DVD images before that way, but never a bootable Mac image.
I'm guessing that a bootable Mac image would involve making a disk image file, copying the necessary system files, blessing the image (in Terminal.app, type 'man bless' for more info), and then converting it to a regular ISO image.
Similarly, I think that all you need to make a bootable USB key/drive is to partition it GPT, copy the system files, and bless it. That said, you can probably use the OS X install media to install the OS on the USB key (it certainly works for USB hard drives) directly. You could even do that, then take an image of the drive (using dd) and convert it to an ISO with hdiutil.

How do I create a bootable snapshot image of Lion?

Similar Messages

Maybe you are looking for