How do i create a digital pointer in a presentation?

how do i create a digital pointer in a presentation?

Try OmnidDzzle for free.
http://www.omnigroup.com/products/omnidazzle/features/
or Mouseposé for $4.99 on the Mac App store
http://itunes.apple.com/us/app/mousepose/id405904955?mt=12
I've used both and one or the other should give you what you're looking for at a pretty good price If you have any questions about using either, post back here.

Similar Messages

How do I create a digital frame w/o decreasing the photo size?

I want to frame my photos & upload them to my website. When I use the frame tool, it decreases the photo size & has a large background, which I don't want.

Perhaps the better title for this would've been "How do I create a digital frame w/o INCREASING CANVAS SIZE?"
I have this same problem on Elements 10 and I can't find an answer. It's not because hawaiiski is using Themes. When you apply a frame to the photo through Content > Frames, it decreases the image size on screen and increases canvas size around the framed photo. It's the checkered transparent canvas. But I just want the photo and the frame as a flattened rectangular image, as a jpg, to post in an online album. Just a simple 10 point black frame. I've searched a lot but can't find an easy and/or accurate way to do this. Is there a way to auto-crop the canvas size to the edges of the framed photo? I do the Marquee > Image > Crop that snaps to the edges, but it always leaves a little canvas on one or more sides and I have to crop again. Some people say to apply frames by increasing canvas size, but the design options are limited to solid colors, and it takes longer to do.
Why does Elements have to add the canvas around a framed photo and why isn't there an easier way to crop to the edges? I do dozens of photos at a time and can't be cropping every photos twice just for frames.

In Adobe X Pro, how do I create a digital signature in my document so that my receiver is able to sign it electronically.

In Adobe X Pro, how do I create a digital signature in my document so that my receiver is able to sign it electronically.

If the other person will be using Reader, you should first add a digital signature field and then Reader enable the form. In Acrobat 10 you'd select: Tools > Forms > Edit
to get into form editing mode. You'd then select the signature field tool to add a signature field.
Once you have the document finalized, Reader-enable the document by selecting: File > Save As > Reader-Extended PDF > Enable Additional Features
being sure to save to a new file so you don't overwrite the original. If you don't Reader-enable, Reader users won't be able to digitally sign.

How do I create a digital ID?

How do I create a digital ID and signature

Hi barny hattey,
Kindly refer to this link:Adobe Acrobat X Standard * Digital IDs
Please let us know if you require further assistance.
Regards,
Florence

How do I create a digital book that fits tablets and computer monitor sizes?

How do I create a digital book that fits tablets and computer monitor sizes?
Example: An 8.5 X 11, 2 column Word document with pictures, approximately 100 pages.
Must I also publish the book in a 5X8 format or does Acrobat have something that will do that for me?

Starting at the end:
- When the movie or tv show does transfer onto your iphone/ipod touch you will be able to see it in the expanded view of your device in the "DEVICES" section.
- If the files are not on your device, then:
-- confirm you have SD or HD-SD video. HD-only content will not play and probably will not even sync. iTunes seems to reliably have SD versions with their HD distributions so this should not be an issue
-- confirm you are synch-ing the content to the ipod device by browsing the DEVICE view's Movie or TV Show tabs to confirm the movie or episode is 'checked'
- If the files are on the iPod and you cannot find them, check your Settings: General for Restrictions. If you restrict, for example the movies to "G" rating. PG and higher movies will sync but you will not be able to find them on the iPod!

How can i create a NULL-Pointer

Hello,
how can i create a NULL-pointer (like in C) to call a DLL-function in Labview 8?
I have this function:
XXXXXX FuncName(int32 handle,
char * aCharName,
void * aVoidName,
int32 aInt32Name,
char * Msg);
and have to call it like this:
rc=InitCasRunF(&handle, NULL, NULL, NULL, msg);
When running the vi i get a popup with this message:
Labview: An exception occured within the external code called by a Call Library Function Node.
This might have corrupted Labview´s memory. Save any work to a new location and restart Labview.
VI "......." was stopped at Call Library Function Node Call Library FuncName 0x13E0 of subVI.
Democall.vi
The attached democall.vi is not the original but its like that.
Thanks for any help how i have to create thi NULL-pointer
Message Edited by NewOne on 01-25-2006 03:42 AM
Attachments:
democall.vi ‏8 KB

Thx for your help. Meanwhile it works. It was a stupid, easy thing i didnt see all the time.
I had to change the first parameter as--> Pass: "Pointer to value" instead of "Value". Thats all.
All NULL-values are passed as Int32-value.
One new problem occurs now: After runnning the function Labview crashes down.
Error-report is attached if someone can read someting in this.
When running the dll-function in a c-program it works
When calling the dll-function it in teststand it also works.
Message Edited by NewOne on 01-26-2006 05:14 AM
Attachments:
dce5_appcompat.txt ‏47 KB

How do I create a digital signature on a TCP or a UDP flow?

I am trying to convert samples of a voice signal, which is intercepted from the microphone, into fixed length digital signature bytes (using Hash, or) and attach these fixed length bytes to a communication session between two terminals (UDP or TCP "HTTP"). The other receving end should be able to identify the person at the sending side.
Any thoughts how I could do this?
Any help is most appreciated.
Sam

Sam,
If you have the Sound and Vibration toolkit it may make some things easier for you regarding the voice-recording aspect, but if you aren't recording and playing back the actual sounds, just using this for detection and digital signatures, you shouldn't need to worry about this.
1. For this you are going to be doing some form of Analog Input. Then you will be storing this data to a file. There are examples for both of these aspects in the NI Example Finder from within LabVIEW.
2. If you are going to be doing the FFT, there is a VI under the Mathematics Palette that performs this operation. Again you can use the same example for saving data to the file.
3. You would need to figure out what needs to be done to create a digital signature for this. There may be something in the Sound and Vibration toolkit for this, but I do not know.
4. For the UDP or TCP transfers, there are several examples for doing this and they cover how to create the connection and transfer / receive data. These too are in the NI Example Finder
5. This goes back to number 4, this would indeed be a separate program, but everything else would just be one project and one program.
6. This would depend on how the ID was created in step 3, again whether you do the algorithm on yourself or not. For comparing to the table, you would use a Search Array and some comparison functions, all depending on how you stored the data initially.
7. Graphs are all available on your Front Panel of your VIs and you would just wire up the data that you'd like and have it displayed on the graph.
There will not be an example for everything that you are wanting to do. The examples are meant to help you get started. Have you used LabVIEW before? I would recommend doing the 3 Hour LabVIEW Introduction Course to help you get started. This will cover some of the basic concepts that you will need to know in order to create your application.
Unfortunately I cannot write the code for you, only guide and direct you. LabVIEW is a programming language and does require the user to lay out and create their own program. You will not be able to just find three or four pre-built code-snippets and connect them together to get your appliction working the way you want it. You will need to develop the applications yourself.
Regards,
Jared Boothe
Staff Hardware Engineer
National Instruments

How do i create 6 digital 25Hz PWM output signals with my PCI-6221 card?

Hi!
I´m a student, who´s trynig to control a gasturbine process for my diploma thesis. The control program should be written in LabView 8. I need to control 6 25 Hz PWM signals for the gasvalves. The needed accuracy of the duty cycle has to be about 0.1 %.
A tech. engeneer from NI told us , that we can do this by using one single digital output for each PWM.
Now, after a while, i need to implement it into my program. But there are troubles:
My NI-PCI-6221 standard card only has 2 couteroutputs and only the first of the 3 ports seems to be buffered (Error Nr. 201062)...
I tried to do the programming, by manipulating the "DIO_PWM_50Hz.vi" I found in google.
Does anyone of you have any information or helpful examples how i can create these PWM with my card, or did I get a wrong Information by the salesagent (...not the first time....)?
Thanks for your help
Tobi

Here you can find an example, how to do this:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=DE27921DB53A4D8DE034080020E74861&p_...
As the text says, best would be to use the counter. As your Hardware has only 2 Counters, you would need additional hardware. Best would be to use a Counter-Card (660x), thes boards have up to 8 counters, so you coulkd control your 6 gasvalves indipendently.
The soultion with the timed digital outputs of the m-series boards would only work, if you can use the same timing (one counter) for all 6 outputs.
Hope this helps!

How do I create a digital signature to use when filling out applications online?

The application is asking me to add or create a digital ID to sign and encrypt documents. The certificate that comes with your digital ID is sent to others so that they can verify your signature.
I have four options: Browse for an existing digital ID file
Configure a roaming ID for use on this computer
Create a self-signed digital ID for use with Acrobat
Look for newly inserted hardware tokens

Formscentral does not support forms with digital signature workflows. I suggest you see if our Echosign product meets your needs.

How do I create an n-point running average VI?

I've been programming in sequential written languages like C for many years now. I've been using LabVIEW for the last 4 months and am having problems writing an n-point running average VI. It is really bothering me, because this would be really trivial in C or anything else. But for some reason I can't conceive how I would do this in LabVIEW. I used LabVIEW 5 for the bulk of that time, and we just upgraded to LabVIEW 8 last week so I've been learning it. Wow, some pretty big differences between the two but the gist is the same.
I have a 5-point running average subVI written that uses a run-once while loop with shift-registers that keep their value between subsequent VI calls. This works for what I need, but have 2 problems I would like to overcome.
1. I can't have multiple instances of the same subVI in my top-level VI program because the way the shift-registers are keeping their value between subsequent VI calls. I have to make duplicates of the .vi file (i.e., 5_point_running_average.vi, 5_point_running_average_2.vi) in order to keep all the shift registers seperate.
2. I want it to be an n-point running average. Currently I have to jump into the VI and add another shift register to add another point. I often change my sample rate, and thus being able to have a different averaging window is really handy.
So the VI takes 2 inputs:
n - (integer) the number of points to computer the average over.
in - (real) the current data point.
output:
out[i] = (in[i] + in[i-1] + ... + in[i-n-1])/n
I've also thought about the possibility of needing a 3rd input that is "instance" which might help keep variables within the subVI separated and thus not needing separate duplicate files.
In case you are wondering, I'm using a running average to make digital HUDs easy to read. The actual data that I'm recording to file will not be going through the running average function, because as you can see by the output function, there will be a phase shift in the output. At high sample rates, the digital displays can be moving very rapidly and that makes them hard to read.
Other recommendations as to how to make digital displays easy to read to help operators while performing tests? As for instantaneous data smoothing, so to speak. I already make the displays very large if they are critical.
I'm very interested in this n-point running average solution. I've been scratching my head over it for awhile now and am quite stumped on how to approach this in LabVIEW.
Help is very much appreciates,
-nickerbocker

The atomic operations (delete/insert) MUST do the following:
When you insert into array, all higher elements need to be moved up one slot, then the element is inserted.
When you delete from array, the lement needs to be deleted and all higher elements moved down one slot
Both operations involve an array resizing operation and data shuffling in memory.
How can LabVIEW be sure that the memory can be re-used? What if your code would delete one, but insert two at each iteration? It might well be that the LabVIEW compiler properly re-uses the memory in your particular case, but there are no guarantees. A five element array is peanuts. so it would probably be difficult to notice a difference.
You might want to run a benchmark of the different algoritms using a huge buffer.
"First call?" is defined as followes in the online help:
First Call? returns TRUE the first time the VI runs after the first top-level caller starts running, such as when the Run button is clicked or the Run VI method executes. If a second top-level caller calls the VI while the first top-level caller is still running, First Call? does not return TRUE a second time.
It will only be true exactly once during the entire execution of the toplevel VI, only the first time it is called from anywhere.
LabVIEW Champion . Do more with less code and in less time .

How to manually create layer breaking point for DVD9

Hello, I was wondering if someone could please tell me how I would go about to manually set the layer break point for a DVD9 project that I burned onto 2 DLT tapes. The total size of the DVD is 6.3GB.
I had used the "automatic" setting for burning the DLTs and sent them to a replicator. They came back saying that the layer 0 tape did not allow enough headroom for their Ripguard protection.
I've always used the automatic setting and this is the first time I am asked to manually set it. SO now I need to figure out how I can put a certain amount of data on one DLT tape and the rest on the other DLT.
I am a beginner at this so any help would be greatly appreciated.
Thank you!

Hi Eric,
Unfortunately the information you have regarding RipGuard and the ability to copy RipGuard protected discs is a little outdated.
Can RipGuard be broken? Yes, anything can be broken into, including the DoD Website by 14 yr old chinese students... but that doesn't mean there isn't value in protecting the DVD.
Also, RipGuard is regularly updated, just like Antivirus software, so while older versions of RipGuard can be broken more easily, the latest versions of RipGuard are significantly more difficult to circumvent by existing software.
But again, the point isn't to create the unbreakable 'holy grail' DVD copy protection, but rather to protect something of value.
When you leave your house in the morning, do you close your front door and lock it? Of course you do, but why? So no one will break in. But do you think locking up your house is really going to stop someone from going around to the side of the house and busting out a window if they really want to get in? Of course it wont. If someone wants to break into your house, they will find a way.
Same thing with DVDs. You lock your house because it provides a method of protection, a barrier to make it more difficult and to keep honest people honest. That's what RipGuard, or any copy protection software does.
So the question isn't why would you protect your DVD, but rather why wouldn't you? In most cases if you prevent just a few illegal copies of your DVD from being ripped, it has already more than paid for itself.

How do I create a digital stopwatch in FCP X?

I am trying to make a digital stopwatch for a sports related video in Final Cut Pro X but am having some trouble creating it. I also recently purchased Motion 5 but am still very unfamiliar with it. Any help would be greatly appreciated!

Would this work?
http://www.digital-heaven.co.uk/dh_counter

How do I create new mount point

Hello,
I'd like to create a new mount point. The Admin guide says to click the Create button on the toolbar but I don't see anything that says Create (I have New, Edit, Upload,...).
Searching here I've seen references to some code snippets that purport to do it but I'd rather use a GUI.
Thanks for any help

You have to use iFS Manager, not the WebUI.

How do I create a digital signature using Safari 6.0.3

Just got a refurbished macbook air , awesome, however I am realizing that it doesnt have mountain lion which had the ability to take a snapshot of your signature and save it and use it on docs/pdfs. Is there a way to do this using Safari?
Thanks

Just got a refurbished macbook air , awesome, however I am realizing that it doesnt have mountain lion which had the ability to take a snapshot of your signature and save it and use it on docs/pdfs. Is there a way to do this using Safari?
Thanks

Create a change pointer

Hi everybody.
I need to throw a change pointer when a equipment is modified (Table EQUI). I´d like to throw this change pointer when the user change the status of this object (Tabla JEST, field STAT). The problem is that in transaction BD52 I can´t find an adecuate entry and when the user only modifies this status the change pointer is not created. How could I create this change pointer when this field is modified? Exist any FM to create a change pointer or only is possible by customizing?
Thanks a lot.
Regards

The check box is not checked.... That means the change pointer can´t be created when this field is modified??
Thanks a lot
Edited by: Christian Abad Chico on Nov 4, 2009 9:35 AM
Edited by: Christian Abad Chico on Nov 4, 2009 9:35 AM

How do i create a digital pointer in a presentation?

Similar Messages

Maybe you are looking for