How do I create a digital signature on a TCP or a UDP flow?

I am trying to convert samples of a voice signal, which is intercepted from the microphone, into fixed length digital signature bytes (using Hash, or) and attach these fixed length bytes to a communication session between two terminals (UDP or TCP "HTTP"). The other receving end should be able to identify the person at the sending side.
Any thoughts how I could do this?
Any help is most appreciated.
Sam

Sam,
If you have the Sound and Vibration toolkit it may make some things easier for you regarding the voice-recording aspect, but if you aren't recording and playing back the actual sounds, just using this for detection and digital signatures, you shouldn't need to worry about this.
1. For this you are going to be doing some form of Analog Input. Then you will be storing this data to a file. There are examples for both of these aspects in the NI Example Finder from within LabVIEW.
2. If you are going to be doing the FFT, there is a VI under the Mathematics Palette that performs this operation. Again you can use the same example for saving data to the file.
3. You would need to figure out what needs to be done to create a digital signature for this. There may be something in the Sound and Vibration toolkit for this, but I do not know.
4. For the UDP or TCP transfers, there are several examples for doing this and they cover how to create the connection and transfer / receive data. These too are in the NI Example Finder
5. This goes back to number 4, this would indeed be a separate program, but everything else would just be one project and one program.
6. This would depend on how the ID was created in step 3, again whether you do the algorithm on yourself or not. For comparing to the table, you would use a Search Array and some comparison functions, all depending on how you stored the data initially.
7. Graphs are all available on your Front Panel of your VIs and you would just wire up the data that you'd like and have it displayed on the graph.
There will not be an example for everything that you are wanting to do. The examples are meant to help you get started. Have you used LabVIEW before? I would recommend doing the 3 Hour LabVIEW Introduction Course to help you get started. This will cover some of the basic concepts that you will need to know in order to create your application.
Unfortunately I cannot write the code for you, only guide and direct you. LabVIEW is a programming language and does require the user to lay out and create their own program. You will not be able to just find three or four pre-built code-snippets and connect them together to get your appliction working the way you want it. You will need to develop the applications yourself.
Regards,
Jared Boothe
Staff Hardware Engineer
National Instruments

Similar Messages

In Adobe X Pro, how do I create a digital signature in my document so that my receiver is able to sign it electronically.

In Adobe X Pro, how do I create a digital signature in my document so that my receiver is able to sign it electronically.

If the other person will be using Reader, you should first add a digital signature field and then Reader enable the form. In Acrobat 10 you'd select: Tools > Forms > Edit
to get into form editing mode. You'd then select the signature field tool to add a signature field.
Once you have the document finalized, Reader-enable the document by selecting: File > Save As > Reader-Extended PDF > Enable Additional Features
being sure to save to a new file so you don't overwrite the original. If you don't Reader-enable, Reader users won't be able to digitally sign.

How do I create a digital signature to use when filling out applications online?

The application is asking me to add or create a digital ID to sign and encrypt documents. The certificate that comes with your digital ID is sent to others so that they can verify your signature.
I have four options: Browse for an existing digital ID file
Configure a roaming ID for use on this computer
Create a self-signed digital ID for use with Acrobat
Look for newly inserted hardware tokens

Formscentral does not support forms with digital signature workflows. I suggest you see if our Echosign product meets your needs.

How do I create a digital signature using Safari 6.0.3

Just got a refurbished macbook air , awesome, however I am realizing that it doesnt have mountain lion which had the ability to take a snapshot of your signature and save it and use it on docs/pdfs. Is there a way to do this using Safari?
Thanks

Just got a refurbished macbook air , awesome, however I am realizing that it doesnt have mountain lion which had the ability to take a snapshot of your signature and save it and use it on docs/pdfs. Is there a way to do this using Safari?
Thanks

How to create a digital signature in adobe reader

how to create a digital signature in adobe reader?

Adobe Reader Touch (Windows Store app with "modern" UI) does not support any types of signatures yet.
Digital Signatures with certificates
Electronic Signatures (that are legally enforceable)
Signature annotations (hand-writing annotations which may not be secure and legally enforceable)
Adobe Reader XI (traditional desktop app with classic UI) supports #1 and #3.
Adobe EchoSign supports #2.
Adobe Reader for iOS/Android supports #3.

How to create a digital signature error

Hello,
hope i do my post in the right forum (if not i'd be grateful if it could be displaced to the correct forum). I've to do create some incidents to have a look at the output of Security Audit Log (Transaction sm20).
I want to create a digital signature error (SAL Identifier AUV) and i've no clue how i could get it done. First I thought about an invalid single sign on ticket but apart from I would have no clue about how to create such, I don't know if that's a way to make the error, mentioned above, occur.
Maybe you could give me a hint or you have an idea how I could get that done!?
Thanks in advance
Tobias

Adobe Reader Touch (Windows Store app with "modern" UI) does not support any types of signatures yet.
Digital Signatures with certificates
Electronic Signatures (that are legally enforceable)
Signature annotations (hand-writing annotations which may not be secure and legally enforceable)
Adobe Reader XI (traditional desktop app with classic UI) supports #1 and #3.
Adobe EchoSign supports #2.
Adobe Reader for iOS/Android supports #3.

How to create a digital signature using mac

C
an someone tell me how to create a digital signature I can use to sign documents with?

Launch the Preview application and search its built-in help for the term "signature."

How to create a digital signature formy Applet?

who can tell me how to create a digital signature for my applet? i want details of the process, because i know nothing about it. Thank you very much!!!

http://java.sun.com/docs/books/tutorial/security1.2/apisign/gensig.html

I was able to create a digital signature for someone else and use it. How is that protected??

I was able to create a digital signature for my boss who's on vacation using his email address. I figured when I used the signature he would get some sort of email confirmation letting him know, but he got nothing. So it seems like I could create a signature for anyone and use it on any document without their knowledge. What's the protection against anyone creating a signature for anyone else and using it whenever?? Am I missing something??

A digital signature can not be used to verify someone's identity. I can create a signature using anyone's name and email address. In fact, those things are irrelevant to the signature. The only thing that matters is the key used to create it, and therefore to verify it.

How do I delete a digital signature field?

I have Adobe Acrobat Pro 9 on Snow Leopard. I created a digital signature for a PDF file but it didn't look good, so I decided to delete it. I figured out how to delete the signature, but the signature field with the little red arrow did not delete with my signature. I want my PDF form to revert to the way it was before I created the signature. I cannot simply close the PDF without saving because I'd lose all the information I've already entered. Stupid me forgot to save before attempting the digital signature.
HOW CAN I DELETE the digital signature field? Help!

Hi SM,
The place to look for permission settings is on the Security tab of the Document Properties dialog. You can get there by selecting the File > Properties menu item and then select the Security tab.
One thing to note is if the file is Reader Enabled you will need to use the File > Save a Copy menu item to create a non-Reader enabled version of the file. You cannot edit a Reader Enabled file. As an aside, the Save a Copy menu item won't be there if the file is not Reader Enabled.
If the file was created using Designer (which is only on Windows and I know you are using a Mac) then it has to be edited in Designer.
If the file was certified, then you need to remove (clear) the certifying signature before you can edit the file, and to do that you must have access to the private key that was used as part of that signature operation.
Finally, if the file is encrypted (e.g. Password Security or Certificate Security), you can edit the file, but you have to get Acrobat to realize you are the document owner which means you need the Permissions password or or logged in using a document owners digital ID (the former is only for Password Security and the latter is only for Certificate Security).
Steve

How do I remove the digital signature option on Adobe Acrobat 7.x? I don't want it, but it pops up every time I need to sign a form, and I cannot find a way to remove

I created a digital signature to sign forms using Adobe Acrobat 7.x. I really don't want or need this feature, but do not know how to remove it or keep it from popping up every time I need to sign a form. Can anyone help? I'm not that technically savvy, so please explain in layman's terms. Thanks!

It's not clear to me what you're trying to accomplish. If you get rid of your digital ID you will still be prompted to create/add one when you need to sign a form, which you say you still need to do? Do you really just want to e-sign (hand-drawn signature, or stamp) instead of digitally sign? Do the forms you're using have digital signature fields?

How to export & reconstruct a digital signature

I would like to submit a reader-enabled pdf form with a digital signature from within a browser.
I'm currently using CoSign Digital Signature to successfully create the signature. I have created a test form with Acrobat X Pro and assigned the "Submit a Form" action to the submit button. The form is configured to submit to a perl cgi, with the Export Format set to FDF with the following settings...
- Field Data
- Incremental changes to the PDF
The post data is received as the POSTDATA parameter and printed back to the browser as content-type: application/vnd.fdf. However, when the fdf is printed back to the browser the digital signature is not included in the signature field. The rest of the form is populated successfully. If I log the POSTDATA value, I can see what appears to be the digital signature.
According to the Adobe docs...
"FDF Exports as an FDF file. You can select one or more of the available options: user-entered data, comments, and incremental changes to the PDF file. The Incremental Changes To The PDF option is useful for exporting a digital signature in a way a server can easily read and reconstruct."
My question is, how do I reconstruct the digital signature so that I can save it offline within the PDF file?
Thanks

You can't sign a blank document simply by importing an FDF. The data is in the FDF, but the appened saves (aka incremental change) would have to be extracted from the FDF (e.g., using the no longer supported FDF Toolkit) and then concatenated with the original blank form that was used by the person who filled-in and signed. I can't say for sure this will work any more anyway as Acrobat/Reader has changed the way this works and does a Save As (as opposed to Save) when a document is signed, so there is no incremental change data any longer.

How do I remove a digital signature from Adobe Acrobat Pro. I have set it up wrongly.

I created a digital signature but I wanted to change the signature and it also was not password protected. So I deleted the signature but cannot delete the certificate to set it up again.
Mac OS X (Operating System)
So I am unable to delete the digital signature in Acrobat Xi pro.
I did the following: Adobe | Preferences | Signatures | Creation and Appearance Preferences and deleted the signature. But Adobe | Preferences | Signatures | Digittal ID and Trusted Certificate Settings, does not want to delete.
Tank you.

It's not clear to me what you're trying to accomplish. If you get rid of your digital ID you will still be prompted to create/add one when you need to sign a form, which you say you still need to do? Do you really just want to e-sign (hand-drawn signature, or stamp) instead of digitally sign? Do the forms you're using have digital signature fields?

How do I create a handwritten signature in Adobe Acrobat Pro 9 Extended

How do I create a handwritten signature in Adobe Acrobat Pro 9 Extended? I had it working for years and then lost the ability to use it when I updated the software. Please advise. Thanks!

Hi StancyisS&V,
Please see this Help document: http://help.adobe.com/en_US/acrobat/X/pro/using/WSB3F26303-0F1D-494a-BC55-7BF7F6684B4D.htm l
Let us know if you have additional questions!
Best,
Sara

How do I create a digital ID?

How do I create a digital ID and signature

Hi barny hattey,
Kindly refer to this link:Adobe Acrobat X Standard * Digital IDs
Please let us know if you require further assistance.
Regards,
Florence

How do I create a digital signature on a TCP or a UDP flow?

Similar Messages

Maybe you are looking for