How do I create a driver for custom equipment

Hello,
I have a current set up that I use to simulate a set up and then I have
that datalogged onto excel using a different piece of software. I would
like to create a driver for the set up and use it directly on labview
instead, but I'm having trouble getting started with that. Any general
information would be helpful.

Your question is a little vague. If you wish to create a LabVIEW driver for serial, GPIB, Ethernet, USB, instruments, then there is a lot of tools and information at the Instrument Driver Guidelines site. If it's another type piece of equipment, you'll need to provide some more details on what it is and exactly what you're having trouble with getting started.

Similar Messages

How can i create a Trash for external USB Drives ?

Hello,
how can i create a Trash for external USB Drives or my TimeCapsule ?
Thanks.

You do not need to create trash cans for individual drives. The trash can on the desktop holds deleted files from all mounted drives.
TimeCapsule manages its own space. If it fills up it will delete older backps to make space for newer ones.

How to write a driver for custom hardware on a digital port

Hi,
I am a complete newbie to LabView and so I hope that someone can hint me to the information I need.
At the moment, I am completely lost.
I have the CVS-1454 which has a digital I/O port.
Now I want to plug a custom made converter on this port to convert the digital port into 4 RS232 ports.
The hardware is not the problem, but how do I write a driver for my box?
Is there some kind of tutorial on writing drivers available?
All I found in the official documentation was that you can write your own drivers, but the link to the page which should give more information was invalid :-(
Thank you for reading and have a nice day,
FReAK

Frankly, what you're attempting to do may be beyond the capability of both LabVIEW and the digital I/O. At the very least, it's going to take quite a bit of work. On the transmit side, you're going to have break down characters into binary and then transmit them at a pretty precise rate. I'm not familiar with the CVS-1454 but a lot of digital I/O on NI devices is not hardware timed. Using software timing is going to be risky. You have the same issue on the receive end - just in reverse. I think that if I was forced to convert some digital I/O to serial, I'd try to use commerical parallel to serial converters. The digital I/O is similar to a parallel port and the converters handle all of the conversion, timing, and handshaking for you.

How to create number range for custom object

Hi all,
I want to create number range for custom object or custom tables
Thanks
Hemalatha

Hi,
Thanks, I am able to create a number range for custom object through SNRO tcode.
Thanks
Hemalatha

Create Service Request for Customer

hi,
can u pls tell me how to create Service Requset for Customer using BAPI??????
regards
Guru

hi,
thanks for ur response
how to assign a service request to person who is suitable for service.
(for example customer faced problem with our product so he will make a complaint on that product, i think this is service request , we need to resolve that problem as we assign that service request to some other person who can able to solve .
<b>Am i thinking in Correct way</b>)
i need bapis to ful fill for the above senario
regards
Guru

How will i configure partner determination for customer master

how will i configure partner determination for customer master data.

hi
Check this
BUSINESS PARTNERS AND PARTNER DETERMINATION
In the partner determination procedure you can determine whether partner functions can or should occur in a partner object (Customer Master, Sales Document, Item Category etc.) For each object, in which partner function can be created, you can define partner procedures. This also means that
For Customer Master
For Sales Documents
For Sales Documents and Billing Documents: for items
We can define our partner determination procedure for each of these levels as shown below. In Blue are given the ones wherein the Partner Procedures are assigned to the Partner Objects
Customer Master Account Group
Sales Document Header Sales Document Type
Sales document Item Item Category in sales
Delivery Delivery Type
Billing Header Billing Type
Billing Item Billing Type
Sales Activity Sales Activity type
By assigning a procedure you determine for which account groups (for the customer master), which sales document types (for sales documents) and for which item categories this procedure would be valid.
In the partner determination procedure you can determine for each partner function
whether the partner function is an obligatory partner function
whether the partner function can be changed in the document
BUSINESS PARTNER FUNCTION
By assigning a business partner function to a partner you can determine which functions the partner fulfils in the business process. Partner Functions are classified using partner type. The partner type represents the roles played by the business partner within the business transaction.
Following partner functions exist in the standard process of Sales and Distribution
Partner Type Customer
Sold-to Party, Ship-to Party, Bill-to Party, Payer and Sold-to Party authorized to release against a contract. You can define the sold-to party authorized to release against a contract in the partner screen of a contract. This partner may only schedule orders with reference to this contract, even when he is not the sold-to party authorized against a contract.
Partner Type Contact Person
Contact persons are natural persons whom you must contact at the customers for business processing (e.g. purchasers) Contact person can be created directly in customer master record.
Partner Type Vendor
A forwarding agent is an example of a business partner on the credit side, who is included in a sales process. If you commission a particular forwarding agent for deliveries to a specific customer, you can define the forwarding agent in the customer master record as the partner.
The other possible partner functions on the credit side in the sale process are interpreters, auditors etc. The forwarding agent is an agent who performs transportation services. This includes organizing the shipment, delivery and receipt of the goods, arranging the carrier services and handling the customs issues.
Partner Type Personnel
Employee Responsible
Sales Personnel
You can enter an employee from your firm as the person responsible:
In the Customer Master If the employee is normally responsible for processing transactions with this customer.
In the Sales Document If the employee is responsible for processing the Business Transaction.
STEP WISE PROCESS FOR PARTNER DETERMINATION PROCEDURE
Sales and Distribution->Basic Functions->Partner Determination->set Up Partner Determination->Set up Partner Determination for Customer Master.
First go to OVT0 create customer account groups. Here you make new entries, click whether it is a one time customer, description. Also you can do the field selection here for general data, co. code data and sales area data.
Now go to IMG logistics general business partner customers control define & assign customer number ranges define the number. Here you range that you want and assign it to your customer account group.
Now go to VOPA here the selection will be on customer master, click on partner procedures, create the partner determination procedure. The following steps need to be done in partner determination area
Assign partner function to account group i.e SP,SH, BP, PY to account group (debit side ). Sales and Distribution->Basic Functions->Partner Determination->Assign Partner Functions on the debit side to account Groups.
Then create Partner Determination Procedure.
Assign the Partner Determination Procedure to Partner Function.
Then finally assign the Partner Determination Procedure to acc group.
Important Points in Business Partners and Partner Determination Procedure
Partner relationship maintained/defined in the customer master is proposed automatically in the document header when you create a sales document.
In customizing we can decide whether several partners can be assigned to one partner function in the customer master.
In sales documents, the system is configured so that only one partner can be assigned to each partner function.
We can define partners at item level in the sales documents.
Business Partners that are defined at the header level however cannot be changed at the item level.
You can prohibit anyone from changing a partner that has already been entered in a sales document.
It is also possible to manually change or enter the address of a partner, such as the Ship-to Party. This change does not affect the master record.

How to set partner determination procedure for customer hierarhies.........

hi,
sap gurus,
how to set partner determination procedure for customer
hierarhies.........
regards,
balaji.t
09990019711.

Hello Rajesh,
The PDP is set up in customizing.You must create a regular partner determination procedure.In the IMG choose
CRM>Basic Functions>Partner Processing-->Define Partner Determination Procedure
You can define a partner determination procedure for each object type.
PDP assigned to the object type Campaign can also be campaign-type-dependent.
IMG:CRM>Marketing>Marketing Planning and Campaign Management>Partner Processing>
Assign Partner Determination Procedure
Hope this helps!
Best Regards,
Shanthala Kudva.

How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
Sander

Hi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How can I create a form for users wherein the text field will expand to accommodate additional text?

How can I create a form for users wherein the text field will expand to accommodate additional text?

You need to use LiveCycle (PC Only) to create a dynamic form like that.
The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

I've never used garage band. How do I create a ringtone for my new Iphone4s?

I've never used garage band. How do I create a ringtone for my new Iphone4s?

Onefineday wrote:
How do I create a ringtone for my new Iphone4s?
this explains how:
http://www.bulletsandbones.com/GB/GBFAQ.html#makeringtone
(Let the page FULLY load. The link to your answer is at the top of your screen)

HOw do I create a ringtone for iphone5 using the new itunes

How can I create a ringtone for my iphone 5 using the newest version of itunes. Thanks

This article takes you through the process
http://www.simonblog.com/2012/12/01/itunes-11-how-to-create-free-ringtone-and-te xt-tone/

How to download the LAN driver for Satellite A100 PSAA8E

Can anyone help how to download the LAN driver for my machine. I found three LAN drivers but unable to download them from the toshiba europe website.
Thank you

> Whats the problem???
> I found on the Toshiba European site different driver
> version for different OSs.
> You have to download the compatible one. If you use
> XP choose the newest version for XP OS and if you use
> XP MCE or Vista choose another one.
>
> Thats all.
I am unable to find a compatible LAN driver for an XP OS. Can you tell me where exactly to look for this

HT1338 How do I install a driver for the speakers I have connected to the headphone jack?

How do you install a driver for speakers I have connected to the headphone jack?

You don't need drivers for speakers in a headphone jack.
What is the problem?

HT1660 How do I create a library for a second iPod?

How do I create a library for second iPod?

See How to use multiple iPods, iPads, or iPhones with one computer for the official suggestions. In practice a single library with each device syncing to one or more playlists is much the easiest way.
tt2

How do I create a driver for custom equipment

Similar Messages

Maybe you are looking for