How do i create a header that can be seen by seo for firefox?

So I've tried to make a bunch of different headers in iweb but they never actually publish as headers but as something different. When I run SEO for firefox it never detects any headers in my entire page. Is there a way to create a true header in iweb?

no, the headers, here's a picture of the headers on this page. When I use SEO for Firefox, it sees them on every other page but never on my iweb sites.
Quickpost this image to Myspace, Digg, Facebook, and others!

Similar Messages

  • How do I create DRM Licenses that can be used for Offline Playback?

    [ Background ]
    Typically, a license is acquired from the DRM license server when the client video player encounters a video that is DRM-protected.   However, some use cases call for the ability for end-users to be able to play DRM content when a network connection is not available to the device.
    For example - the user wants to download a video from their home, acquire a license to play the content, and then get onto a train/airplane where a network connection isn't available.  On the train/airplane/etc..., the end user expects to be able to watch their video that they downloaded at home.
    [ DRM Policy Requirements ]
    For this use case to be possible, the DRM license must be acquired when the network connection is available.  In addition, the DRM license must be allowed to persist on the device disk.  For this to be possible, one value must be present in the DRM policy:
    1. Offline License Caching must be set to 1 or higher.  This policy parameter indicates how many minutes a license is allowed to be persisted to disk once it's been acquired by the license server.
    [ Workflow ]
    Now that the content has been packaged with a DRM policy that allows for offline caching (persistance) of a license, the video player simply has to acquire the license before the network connection is lost.  This can be accomplished via the typical API calls that the Video Player Application Developer would use to do a normal DRM license acquisition (DRMManager.loadVoucher()).
    For example, by using the DRMManager ActionScript3 API: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/drm/DRMManage r.html
    For other platforms supported by Adobe Access DRM (iOS, Android, etc...), please refer to the appropriate documentation around playback of DRM content on how to pre-fetch the DRM license.
    [ Workflow - iOS ]
    Enabling offline playback using the Primetime Media Player SDK (PSDK) for iOS requires a bit of self-extraction & instantiation of the DRM Metadata from the m3u8.  The reason for this is that as of PSDK v1.2, the PSDK APIs do not expose an mechanism for extracting the DRM metadata.
    You must manually (outside of the PSDK) get access to the DRM Metadata, instantiate a DRMContentData, and then use the DRMManager class to obtain a license for your content.  Afterwards, you may download your HLS content and stream it to your video player application locally.  Since the DRM license was pre-acquired before playback of the downloaded HLS content, your video player application does not require a network connection to acquire a DRM license.  Below is a code sample of obtaining the DRM Metadata from the m3u8 manifest and then using it with the DRMManager singleton.
    /*          Main entry points, playlistURL is url to a top level m3u8. */
    void PlayContent(NSURL* playlistURL)
              DRMManager* drmManager = [DRMManager sharedManager];
              if ([drmManager isSupportedPlaylist:playlistURL])
      // First we need a handler for any errors that may occur
                        DRMOperationError errorHandler = ^(NSUInteger major, NSUInteger minor, NSError* nsErr)
      /*          report error. */
      /*          Synchronous call to DRM manager to extract DRM metadata out of the playlist. */
                        [_drmManager getUpdatedPlaylist:playlistURL
                                                                                      error:errorHandler
                                                                                    updated:^(NSURL *newPlaylist, DRMMetadata *newMetadata)
                                   (void) newPlaylist; /*          updated URL is not used for this code sample. */
                                   if (newMetadata)
                                                      Assumes we are going to try to satisfy requirements to acquire license on the first policy in the metadata.
                                                      If there are multiple policies in the metadata, only 1 of them need to be satisfied for the license request to
                                                      go through.                                          
                                             DRMPolicy* drmPolicy = NULL;
                                             for (id object in newMetadata.policies) {
                                                       DRMPolicy* drmPolicy = (DRMPolicy*)object;
                                                       break;
                                             if (drmPolicy == NULL)
                                                       /*          report error, this metadata is malformed. DRM metadata must contain at least 1 policy*/
                                             if (drmPolicy.authenticationMethod != ANONYMOUS)
    However, please note that the above only describes the DRM license handling for offline playback.  The actual playback of video using the Primetime client SDK is not officially supported.  You will have to use your own mechanism of saving and playback back HLS content locally within the application.
    Theoretically, it is possible to save the HLS stream to the app, and then embed an HTTP server to the app to stream the HLS content back into the application.  However, the Primetime client SDK doesn't not expose a way to do this directly, since it's not yet supported.
    cheers,
    /Eric.

    no, the headers, here's a picture of the headers on this page. When I use SEO for Firefox, it sees them on every other page but never on my iweb sites.
    Quickpost this image to Myspace, Digg, Facebook, and others!

  • How do I create a letter that can then be attached to email

    How do I create a letter that then be attached to email? Thanks, Newbie

    Use a text editor or word processing program to create the letter. Then attach it to your email.
    Why are you asking in the Windows Compatibility forum?

  • How do i create a stensil that can be added into diffrent files of adobe reader?

    I want to create a stencil that can be used in multiple adobe files for quality check purpose. Will be helpfull if somebody helps me out on this.

    why are you saying
    Pat Willener wrote:
    Please stay in your own topic, and answer the questions asked!

  • How do I create a form that can be edited, then mailed, then edited again?

    I am trying to create a form that would be emailed to one person, they would complete part of it, email it on to a second user who would then complete another part based on the input from the first, and then forward it onto a third for their input.
    the issue I have is that once the second person enters their information, they can not save their additions and continue the process.
    any help would be greatly appreciated.

    Interactive forms cannot be saved locally using Reader. To do local save you either have to have Acrobat on each desktop or have the form Reader-extended to enable local save in Reader. A form is Reader-enabled using the LiveCycle Reader Extensions server component.
    Steve

  • How do I create fillable sections that can be filled or ticked online and then signed?

    Hi, I'm trying to make some fillable sections on a pdf file that is to be filled in online.  How do I do this?

    In Acrobat you can Reader-enable the file. For Acrobat 11, the menu item to do this is: File > Save as Other > Reader Extended PDF > Enable More Tools
    Do this as the last step before you distribute the form. Note that this isn't needed for Reader 11 since it is capable of saving a non-enabled PDF form that was created with Acrobat (as opposed to LiveCycle Designer).

  • How do I create a header that reappears when scrolling up?

    Hi there,
    It's my first time using Adobe Muse and I starting to get the hang of it. I'm trying to work out how to get this header effect, Hide header on scroll down, show on scroll up — Medium.
    I'm sure it's fairly simple but I really don't have time for trial and error. I'm designing a functioning site for a branding project in my graphic design portfolio and need to get it done so I can send it off to agencies (I'm a recent graduate). A year ago I would've designed it in Photoshop and animated is in AE but I'm pushing myself to actually make it and get the hang of more web design/UI sort of stuff.
    At the moment it stays at the top of my one-page design, but I really want it to reappear when scrolling up as it's a very long design, and seems like it's needed. Any help would be greatly appreciated!

    Hi Richard,
    The function that you are referring to is not possible in Muse out of the box. I will recommend that you post this as an idea to our ideas section, Ideas for features in Adobe Muse
    - Abhishek Maurya

  • How do I create a form that can be filled out, saved with data, and returned?

    We don't want to use EchoSign or any kind of service or account. We just want to send a form to clients via email and have them returned to us with their data. Simple. Intuitive. Requires virtually no explanation or bother. Why can't I find any way to do this in Acrobat any more? Is it hidden, or completely disabled? (Acrobat Pro 10.1.7)

    In Acrobat you can Reader-enable the file. For Acrobat 11, the menu item to do this is: File > Save as Other > Reader Extended PDF > Enable More Tools
    Do this as the last step before you distribute the form. Note that this isn't needed for Reader 11 since it is capable of saving a non-enabled PDF form that was created with Acrobat (as opposed to LiveCycle Designer).

  • How to create a latch that can latch the input data for 50ms?

    Now I have some data come from the sensor. I want to latch this data for 50 ms and then reset it to 0. Does anybody do this before? Thank you

    Now I am using the "two button dialog" to create a dialog box. After the dialog box pop up, I choose "yes" the "two button dialog" will output a "True". My problem is that this "True" disapear too fast. My while loop frequency is only 20Hz. And I want to send this "True" value to somewhere. However the two "button dialog" will clear this "True" after 10ms?. So I always got a "false" value. How to "Freeze" this dialog box output value for at least 50ms? How to create a latch to hold this value?
    Attachments:
    Two_button_Dialog.bmp ‏1132 KB

  • How do I create an application that can be printed AND filled out online via my website?

    Is InDesign the best program to do this in?

    Webform with HTML would be best.
    But depends on a lot of things...
    InDesign is not a web authoring program.
    But it can produce fillable forms ... which are PDF.
    So if you want it on your site - a webform is best.
    If you want it as link they fill out and submit then InDesign.

  • Creating a query that provides a default transaction type for those transactions not categorized?

    How could I create a query that provides a default transaction type for those transactions not categorized?
    So assuming I have:
    * Transactions table (with transactions)
    * Categories table
    * transactions_categories table - allows to allocate multiple categories (with a percentage)
     - tranactionID
     - categoryID
     - percentageAllocation
    * Usage is such that only non-personal categories have been applied through out data.  So there is a lot of transactions with no categories applied
    Aim:
    * Want to create a query that creates a list of all the allocated amounts, so would include as columns:  transaction.tDate, transaction.tTitle, categories.name, allocatedAmount(calculated from percentage * transaction amount)
    BUT:
    * How could I include in the query, the entries that cover all transaction that haven't been allocated, to a default category "personal", where the allocated Amount would be 100% of the transaction value
    * And also (if it were possible), for transactions that have been categorized but not for the complete transaction value (say only 50% was allocated to a category), how to to cover this off to.  

    To default the value of the category:
    select IIf(IsNull(Category),"Personal",Category) as Category,IIf(IsNull(Category),"100%",PercentageAllocation
    ) as PercentageAllocation from [yourtable]
    What do you want to put the values of these ones:
    And also (if it were possible), for transactions that have been categorized but not for the complete transaction
    value (say only 50% was allocated to a category), how to to cover this off to.  
    Fouad Roumieh

  • How to create a user that can login the LDAP?

    I want to create a user that can login the OID/LDAP. I know how to create a user, it is allowed to login OIDDAS, but I also want the user to grant access to ldap directly. How do i do that?
    And how can I give it read rights and or update/delete rights on a specific tree?
    Regards
    Eelco

    Eelco,
    did you see the OiD developers guide? Here you find some examples how to create users in OiD using pl/sql or java.
    http://download-west.oracle.com/docs/cd/A97329_03/manage.902/a95193/smplcode.htm#637294
    how to use directory access control can be found in
    http://download-west.oracle.com/docs/cd/A97329_03/manage.902/a95192/access.htm#1054232
    --Olaf

  • How to create a vi that can be connected to any type of array

    I would enjoy to create a vi that can perform an operation (like resizing) on any type of array (array of string, of cluster, of num,...): Which type of control or indicator could I use for this purpose? Any Idea?
    Thank's for your help

    Olivier,
    to do this you have to use a variant input. You can wire any type of data to a variant input. Inside the VI you flatten the variant to a string. The flattened string of an array contains both data and length of the array. You reshape the array manipulating the string. When done, you unflatten the data to a variant and output it from the VI. The caller has to convert the variant input to the source array type. OpenG.org provides a quite extensive toolkit to manipulate variant data. Some VIs specifically manipulates arrays. To see a description of VIs go to : http://opengtoolkit.sourceforge.net/lvdata/index.html
    LabVIEW Data Tools can be downloaded from http://sourceforge.net/projects/opengtoolkit/
    You need both packages lvdata AND error.
    LabVIEW, C'est LabVIEW

  • How do i create a report that has drill-down with class?

    How do I create a report that has drill-down levels so that I can have summary information at the top level but then view specific records at a more detailed level?

    can i know ur email address.
    this is my other one coding
    but problem is very very slow when i 1 see my output
    TABLES: proj, coep.
    *&            TYPES DECLARATION                                        *
    *TYPES: BEGIN OF tb_coep,
             wtgbtr TYPE coep-wtgbtr,
          END OF tb_coep.
    DATA : int_proj TYPE proj OCCURS 0 WITH HEADER LINE.
    DATA : int_coep TYPE coep OCCURS 0 WITH HEADER LINE.
    DATA : gd_date(10). " FIELD TO STORE OUTPUT DATE
    TYPES : BEGIN OF t_date,
              year(4)  TYPE n,
              month(2) TYPE n,
              day(2)   TYPE n,
           END OF t_date.
    *&            SELECTION-SCREEN                                         *
    SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: so_pspnr FOR proj-pspnr OBLIGATORY.
    SELECTION-SCREEN ULINE.
    SELECTION-SCREEN END OF BLOCK b01.
    *&            TOP-OF-PAGE                                              *
    *&            fetch the data for the list                              *
    SELECT * INTO int_proj FROM proj where
             pspnr in so_pspnr.
    append int_proj.
    CLEAR int_proj.
    ENDSELECT.
    SELECT * into int_coep FROM coep WHERE
             wtgbtr in so_pspnr.
    append int_coep.
    CLEAR int_coep.
    ENDSELECT.
    LOOP at int_proj.
      write : / int_proj-pspnr, int_proj-post1.
    ENDLOOP.
    LOOP at int_coep.
      write : int_coep-wtgbtr.
    ENDLOOP.
    Edited by: Dickson on Jul 10, 2009 10:53 AM

  • How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

    How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
    I currently run OS X 10.10.1
    Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
    Here is an example of what i want to happen.
    I will have 2 tabs: Contact | Sales
    Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
    for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
    Now how do i do this, Excel can do this so how can numbers do it?

    Hi Shegra,
    Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
    quinn
    Script starts:
    -- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
    property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
    property DataEntryTable : "Sales" --name of table with popups to be refreshed
    set copyRange to {}
    property PopValueSheet : "Sheet 1" --name of sheet with popup values table
    property PopValueTable : "Contacts" --name of table with popup values
    set PopStartRow to {}
    tell application "Numbers"
      set d to front document
      set ps to d's sheet PopValueSheet
      set pt to ps's table PopValueTable
      set s to d's sheet DataEntrySheet
      set t to s's table DataEntryTable
      set tf to t's filtered --this records filter setting on data Entry Table
      display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
      set PopStartRow to {text returned of result}
      tell pt --convert list to alphabetized popups
      set ptRows to count rows
      set copyRange to ("A2:" & name of cell ptRows of column "A")
      set selection range to range copyRange
      set selection range's format to text
      sort by column 1 direction ascending
      set selection range's format to pop up menu
      -- popupsmade
      set selection range to cell ptRows of column 1 of pt
      set v to value of cell ptRows of pt
      end tell
      activate application "Numbers"
      tell application "System Events" to keystroke "c" using command down
      tell pt
      set selection range to range copyRange
      set selection range's format to text
      end tell
      tell t
      set filtered to false
      set tRows to count rows
      set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
      set selection range to range pasteRange
      tell application "System Events" to keystroke "v" using command down
      set filtered to tf
      end tell
    end tell

Maybe you are looking for

  • Adobe Reader will not open (Mac)

    I installed a trial of Acrobat and something went wrong.  When I ran it for the first time it said that certain elements needed repair and asked if I wanted to repair or get rid of the Safari plug in and the Adobe virtual printer.  Then it said Inter

  • Tesco Grocery app - can't get to work

    i've got a C7 & i just can't get this to work! it downloaded & launched fine & i was able to log-in ok, but not able to retrieve any orders. it said 'pls try again by clicking onto home'. tried loads of times, but i still get the same message. uninst

  • Where can i find the database?

    im using the discovery server now. and i need to update some data in. however i could not find where is the database store and how i can edit/add/update it. please advise.

  • Videos not playing. Says it's processing

    The videos I recorded on my phone can't play anywhere. They say media not found, can't play video, and that it is processing. I've tried connecting to my laptop, every thing on my phone capable of playing videos and it's not working. I haven't delete

  • Adobe Reader 10.1.2 Crashes on Find or Advanced Search

    When I try to do a Find or Advanced Search on a PDF document in Adobe Reader 10.1.2 with either the standalone or browser version, it suddenly stops working and I must close it.  Occassionally the search will work but most it causes the Reader to cra