How do I create a mottled texture like in this poster?

Hello,
I am trying to figure out how to create this mottled texture used in the poster below? Looks like a noise filter of some kind. Would I be better using Photoshop or Illustrator for this? I am using the texture in the context of a book, repeating the texture on certain pages.
Thanks alot!
Henry

Henry,
Have you tried the Effect>Pixelate>Whatever, or something else in that area of the Effect dropdown? There are some options there.

Similar Messages

How can I create my own toolbar like SmartBar??

I would like to know how can I create my own toolbar that works like the default smart bar.
I need to work with a smart bar, but i have to create it, and it has to work like the default one.
the smart bar should be able to navigate along my different forms/canvases.
Can someone help me??
With regards
Tiago Valador

Tiagor,
you can't change the smart bar. All you can do is to create a hrizontal toolbar canvas.
Frank

Lipstick font type or how to create lipstick font type like in this image

looking to create a font type like this. Any suggestions how?
Thanks

Nothing will look as good as doing it by hand, so unless there were a lot of text, I'd do it that way.
Here's a nice font in that vein, though:
https://www.myfonts.com/fonts/mvbfonts/sacre-bleu/
You could even try... cough... Mistral, but it will probably end up looking something of an 80s pastiche.

How do i create a collage to print as a poster

I want to create a collage to print as a poster of an album of say 30 photos.
How can i do this?

As Larry said 3rd party software is what you need. One of the best and easiest to use I've found is Pages. Just create a custom page the size of your poster, drag photos from the iPhoto window into the Pages window, resize as desired and drag to where you want it.
Another app, OmniGraffle, is one that I used to create this 96 photo poster:
It's somewhat expensive but the demo version will let you work with up to 10 photos on a page.
Otherwise go to MacUpdate.com and search for "collage" to get a list of potential candidates.
OT

How do I create a similar line effect to this:

I'm trying to figure out the best way to create a similar line effect to this in illustrator, any ideas?
Thank you!

Draw a black spikes (vertically), option drag a copy, make a blend specified steps.
Copy paste in front, rotate 180 degrees, adjust position
Draw a circle on top, use as a mask.
Rotate all about 30 degrees.

How do I create & edit a pattern like this in Illustrator?

I want to know how to create and edit a pattern like this in Illustrator:
And then be able to do this:
(same pattern with blue square effect)
Any advice would be appreciated.

Read up on creating patterns. This one is just simple lines and very easy to do, but remember that the defining rectangle MUST be at the very back of the stack:
Start off by making your pattern tile (top). Drag the drawing to the Swatches panel.
Fill a rectangle with the pattern. Scale and rotate the pattern fill (see Scale and Rotate dialogues).
Recolour the pattern using Edit > Edit Colors > Recolor Artwork

How would I create a photo gallery like this in Muse?

Just trying to get the same kind of abilities working in muse. Link for site/gallery below
greg noire - photographer

You can try using lightbox widget. Try playing with opacity in normal and rollover states of thumbnails.
Else, you can add another image on rollover state of thumbnail which may be a little darker than the original one.

How would a calc all script look like for this outline

I understand that
When you perform a default calculation (CALC ALL) on a database, Essbase calculates the dimensions in this order:
If both a dimension tagged as accounts and a dimension tagged as time exist, and if formulas are applied to members on the accounts dimension, Essbase calculates in this order:
Dimension tagged as accounts
Dimension tagged as time
Other dense dimensions (in the order in which they are displayed in the database outline)
Other sparse dimensions (in the order in which they are displayed in the database outline)
Otherwise, Essbase calculates in this order:
Dense dimensions (in the order in which they are displayed in the database outline)
Sparse dimensions (in the order in which they are displayed in the database outline)
but what would the calc srcipt look like for the below outline
Dense 1 = 1822 (Accounts)
Dense 2 = 32 (Periods)(Time)
Sparse 1 = 12
Sparse 2 = 10
Sparse 3 = 17
Sparse 4 = 21
Sparse 5 = 22
Sparse 6 = 7
Sparse 7 = 79
Sparse 8 = 761
Sparse 9 = 1081
Sparse 10 = 12140
Thanks in advances
Edited by: Next Level on May 18, 2012 1:43 AM

No need to get excited, especially as you have already answered the question.
As you wrote:
If both a dimension tagged as accounts and a dimension tagged as time exist, and if formulas are applied to members on the accounts >>dimension, Essbase calculates in this order:
Dimension tagged as accounts
Dimension tagged as time
Other dense dimensions (in the order in which they are displayed in the database outline)
Other sparse dimensions (in the order in which they are displayed in the database outline)So Essbase will calculate, in listed order, the following dimensions:
Accounts
Period
Years
Subledger
Company
Region
Division
Ledger
MfgCenter
Business Center
SubLedger
As I and others have written, doing a CALC ALL on the above is not a great idea for a variety of reasons and I personally think this could likely be done pretty easily as an ASO database, but that's with just a hint as to what your requirements are.
If you don't believe me (and I suggest that you do not for your edification) the above calc order is really easy to test. Create a copy of the database, clear it out, find one level zero intersection for all dimensions and do a lock and send/submit to get one block of data. Use the following commands in a calc script: SET UPDATECALC OFF; SET AGGMISSG ON ; SET MSG DETAIL ; CALC ALL ; That will show you (quickly) exactly what and in what order the database gets calculated. Just take a look at the application log.
Regards,
Cameron Lackpour

How about the statement of regular expression like for this

I what to get varians String array by one regular express for the statement like:
${user} like play ${game} in ${date}
I want to get String[] as {"user","game","date"} by one regex, by str.split(regex). I tried many times but always fail to get the result I expected. May it be possible to meet the destination?
thanks in advance
Frederick

why StringBuffer was using here?So one could split the pattern into multiple lines. But it just occurred to me that one could just use string concatenation, which would look better. I don't know why I bothered to use StringBuffefer.
e.g.:
String pattern =
    "^" +           // the start of a string
    "(dog)|(cat)" + // match either "dog" or "cat" at the start of the line
    "\\s*" +        // match an arbitrary amount of whitespace
    "$";            // but don't allow anything other than whitespace after dog or cat
Pattern p = Pattern.compile(pattern);
Pattern p = Pattern.compile("^(dog)|(cat)\\s*$");> isn't this look more simpler and better?
In this case, yes. I was looking for a way to make regexps more explicit, with whitespace and comments, for more complicated cases.
But those double quotes and plus signs add ugliness of their own, so a regexp would have to be pretty complex before it would be an improvement.

How to Make a Background Texture Like This

Can you please take a look at following image and let me know how I can create a background texture (pattern) like this in Adobe illustrator cs6?
I already tried this using Texture -> Grain -> Artistic -> Film Grain but the result is a little different as:
Can you you please let me know how to do that? Thanks

Actually you are close, it needs something like the light factory in photoshop to generate depth.
The easiest way is to go to your local office supply store, by a sample pack of paper then scan a sheet into your computer, instant texture. You can then overlay any color you choose, depending on the original color of the paper though.

ABAP: How can I create screen like COOIS parameter

Dear ABAP Experrts,
How can I create same paremeter screen like COOIS. E,g in production order parameter screen there are many options but when I create a parameter
in ABAP program
SELECT-OPTIONS:
SO_AUFNR FOR AFKO-AUFNR,
only one column is displayed . How can I show same parameter screen for production order.
Regards
Aneel

Dear Mehwish ,
Thanks for your help. How can I find matchcode for my other columns.?
I mean I want to use some other parameters also like
SO_MATNR FOR MAKT-MATNR
SO_WERKS FOR T001W-WERKS,
SO_PWERK FOR T001W-WERKS,
SO_AUART FOR T003O-AUART,
SO_FEVOR FOR T024F-FEVOR,
SO_VBAK FOR VBAK-VBELN.
How can I find matchcode object.?
Regards,
Aneel

How to properly create complex OCI objects (for Annotation Text)

I am upgrading a tool that will upload text objects to a table with a ST_ANNOTATION_TEXT field. The app is a C++ app and I need to instantiate a ST_ANNOTATION_TEXT (using OCIObjectNew??). I actually have 2 questions. First, does anyone have an example of how to accomplish this? I seem to be unable to correctly create the annotation text type in C++ to be able to append to (calling OCICollAppend). Second, since ST_ANNOTATION_TEXT is a complex type (contains an array of annotation text elements), do I need to call OCIObjectNew on not only the main ST_ANNOTATION_TEXT type but also for the ST_ANNOTATIONTEXTELEMENT_ARRAY, ST_ANNOT_TEXTELEMENT_ARRAY, and the ST_ANNOTATIONTEXTELEMENT?
I can't seem to find in info on this so hopefully someone else has been through this.

user3068343 wrote:
I am still having an issue where the sub objects are still NULL.Actually I was mistaken. I must have confused getting an Object from OCIObjectNew with using one of its constructor method in a statement.
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28395/oci18nav004.htm#sthref3438 clearly state the object will have NULL attributes, unless the OCI_ATTR_OBJECT_NEWNOTNULL flag is set on the environment handle.
http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28395/oci11obj.htm#i446308 further tells you what the default value for the object members will be.
An older 9i doc http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96594/adobjadv.htm#1008774 also warns about resetting the indicator struct member when you update a member of the object.
user3068343 wrote:
++a) you allocate the object's top-level struct yourself (SDO_GEOMETRY in my case) in C+++
Above you suggest creating the objects top-level struct myself. How do you create that top level object? I have been using OCIObjectNew on that object as well as its sub objects? Is that how you are creating the top-level object?This technique works only on binds, as objects you get back from defines are always allocated from the object cache. I create the top-level object directly on the stack... This is something I discovered worked, but is not documented, so you're probably on safer ground using OCIObjectNew instead.
BTW, the reason I can't easily post OCI example code is that my code uses wrappers around the objects that hides most of the OCI:
Geometry Geometry::make_point(OCIEnv* envhp, OCIError* errhp, float x, float y) {
    Geometry point_geom(envhp, errhp);
    point_geom.set_null(false);
    point_geom.gtype() = 2001;
    PointRef point = point_geom.point();
    point.set_null(false);
    point.x() = x;
    point.y() = y;
    return point_geom;
}The above creates an 2D point-type SDO_GEOMETRY hidden inside the Geometry class, itself deriving from a GeometryRef class. The latter wraps a C++ API on top of the struct pointers for a SDO_GEOMETRY/SDO_GEOMETRY_ind, while Geometry actually composes the OTT generated value/indicator structs by value, and passes addresses to its nested structs to GeometryRef (its parent class). So GeometryRef can manipulate an object irrelevant of where it was allocated, the stack or the object cache. The Geometry class is a value class, but it's useful for binds only, and like I said uses a behavior which appears to work but is not explicitly documented.
Unless you have nested objects by reference, nested objects are composed by value in the OTT-generated structs, so the space for all nested objects is already allocated after the first OCIObjectNew. But the members themselves are not initialized, and thus marked as null in the indicator struct.
In the code above, my Geometry instance is fully allocated (on the stack), but fully uninitialized (the indicator is by default set to all nulls). I first set the atomic flag to non-null, then get the Ref wrapper around its nested SDOPOINT_TYPE to also set it to non-null, and fill in the x/y member (via another NumberRef wrapper, which knows about the member and the indicator for that member, and sets it as non-null when assigned to). Notice how how I return the instance by copy: My point geometry instance doesn't have a pointer-aliasing issue here, only because its two OCIColl* are null. In the general case, you can't copy my value wrappers without making a true deep copy... But I'm getting into the weeds here.
The important point is that OCIObjectNew doesn't init the nested objects unlike what I stated earlier. Sorry for misleading you on that. --DD

How do I create a slice transition?

Hello! <3 new here~ :3 I have basic knowledge with adobe, but I'm still a beginner.
How do I create a slice transition like the one used here?

iHeartHxH wrote:
Thanks for the reply =) can you go more into detail on how to get each half to connect coming from opposite ways?
That could be easily done by duplicating it, masking out the two halves (one side on each layer), and then animating the position of those two layers.

How can i create a NULL-Pointer

Hello,
how can i create a NULL-pointer (like in C) to call a DLL-function in Labview 8?
I have this function:
XXXXXX FuncName(int32 handle,
char * aCharName,
void * aVoidName,
int32 aInt32Name,
char * Msg);
and have to call it like this:
rc=InitCasRunF(&handle, NULL, NULL, NULL, msg);
When running the vi i get a popup with this message:
Labview: An exception occured within the external code called by a Call Library Function Node.
This might have corrupted Labview´s memory. Save any work to a new location and restart Labview.
VI "......." was stopped at Call Library Function Node Call Library FuncName 0x13E0 of subVI.
Democall.vi
The attached democall.vi is not the original but its like that.
Thanks for any help how i have to create thi NULL-pointer
Message Edited by NewOne on 01-25-2006 03:42 AM
Attachments:
democall.vi ‏8 KB

Thx for your help. Meanwhile it works. It was a stupid, easy thing i didnt see all the time.
I had to change the first parameter as--> Pass: "Pointer to value" instead of "Value". Thats all.
All NULL-values are passed as Int32-value.
One new problem occurs now: After runnning the function Labview crashes down.
Error-report is attached if someone can read someting in this.
When running the dll-function in a c-program it works
When calling the dll-function it in teststand it also works.
Message Edited by NewOne on 01-26-2006 05:14 AM
Attachments:
dce5_appcompat.txt ‏47 KB

How do I create a new HotMail account?

How do I create another account with Hotmail?

This forum is intended for questions about Firefox. For issues specific to Hotmail, you should see the [http://support.microsoft.com/kb/316659 Hotmail support page].

How do I create a mottled texture like in this poster?

Similar Messages

Maybe you are looking for