How do I create a new alert sound?

In OS 9 it was obvious how to create a custom alert sound, but I don't see how to do it in Tiger or Snow Leopard. Any suggestions?

spudnuty- this works on my MBP Snow Leopard but not on my G5 iMac. In the Library folder_Alerts it will play in iTunes as an audio file when I click on it. But in my Alerts window, it is silent, unless I play another sound. Then when hit my custom sound it plays the previous installed sound.

Similar Messages

How can I create a new page in pages, without creating a new section?

how can I create a new page in pages, without creating a new section?

Good morning graywright,
It sounds as if what you are wanting to do in the Pages application is to insert a Page Break. Follow the steps in this article -
Pages '09: Inserting a Page Break
In a word processing document, click where you want the break to occur, and then choose Insert > Page Break.
To remove a page break, click at the beginning of the line that follows the break and press the Delete key.
In a page layout document, to insert a new page in your document, click Pages in the toolbar and choose from the template page options available.
Thanks for using Apple Support Communities.
Best,
Brett L

How do I create a new document in Photoshop CC and have it 300 dpi?

How do I create a new document in Photoshop CC and have it 300 dpi? I am doing digital scrapbooking and need to have my layout in Photoshop 12 x 12 so it is a scrapbook page and 300 dpi and I hope this doesn't sound stupid but I don't even know what dpi means.
Thank you

File>New
Set preset to print or US Paper
(typing width and height values will change the preset to custom)
Set width to 12 inches
set height to 12 inches
set ppi to 300 (should already be this if you used the print preset)
Click OK

How do I create a "New User"

In my prior post of yesterday, "How do I password protect / lock an album, it was recommended to me to create a new user, then move the desired photos from the current library (current user) to the new library within the new user. Sounds like a good idea, but how do I do it? I'm a bit of a novice. Can someone walk me through the process?
1. How do I create a new user?
2. How do I transfer the selected photos in my current library to the new library in my new user name?
Thanks,
HDP

Hi there,
I think PhillyPhan will post back in your other thread and explain the process...
But to give you my 2 cents, I would opt to create another iPhoto Library folder that contains the images you do not want to share and keep as private as possible.
By using this: hold down OPTION key and open iPhoto, a dialog will open, Quit - Create - Choose, just create another library in any part of your HD or even on an external HD under any name or even inside another folder. Once created you can import the photos you want to keep away from the general public. You can go back and forth between libraries by using the same option key etc. iPhoto will open automatically to the last library you opened. So, you can hide the library anywhere you wish on your Mac HD or external, and alot of people don't know the Option key / open iPhoto > choose library function.
The reasons I would choose to do it this way, someone would need to know you have another library and where the library is located in order to view the images.
Importing the images will take a bit of work, post back if interested or have any other questions...
Rick
iMac G5 iSight 20" - 30G iPOD & Hot Pink Nano 4G - WD 500G FW - Mac OS X (10.4.8) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620 Kodak P880

Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

TS2756 How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

How do I create a new icloud email address for my apple id?

Hi there
How do I create a new icloud email address for my apple id? My original email address is associated with my previous employers.
When I send email from my Macbook, it seems as if I still work there, which is a problem.
I would like to use the email address that I created for my iPad.
When I login with my appleid (for my macbook) I keep getting the old company one, not the new one.
Is there any way of resolving this? I
Thanks
Kelvin

Welcome to the Apple Community.
Providing you aren't trying to change you Apple iCloud email address you can make changes at My Apple ID

How can I create a new ring tone for my iPhone 4?

How can I create a new ring tone for my iPhone 4? I followed the Garage Band process and ended up with the ring tone I want as a AAC audio file. It got stored in my iTunes a a song rather than a ring tone. How do I make it a ring tone vs. a song? I tried dragging it t the Ring Tone category at the bottom of the ITunes list, but it won't alloow me to move it?

There's also an easy to use Applescript over at Doug's Applescripts for iTunes. It automates the whole thing. All you do is set the start and stop time on a file in iTuens and run the script. It will do everything else.
Make Ringable v1.1
http://dougscripts.com/475

How to i create a new itunes account for my old iphone so i can transfer data to new iphone, since my daughters new iphone is now linked to my acc and she ends up with all my apps and contacts etc

My daughter has previously had an ipod which was linked to my itunes iphone account.
she now has a new iphone and has linked this to that account and now she receives all my contacts apps etc when she syncs her account.
How do i create a new itunes account for my old iphone so that i can transfer data to my new iphone and keep the two seperate so that when she deletes all my contacts and apps and then syncs her phone again we can still be compatible.

iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

I have an iPad and and iPhone. They share an iCloud and I want separate iCloud accounts. How do I create a new account without losing any information? I want to keep the original account on one device.

I have an iPad and an iPhone that share an iCloud account. I didn't realize when I got my iPad last year that when I signed up the iCloud on the device that it would share and use 5g of iCloud between the both of them. How do I unsync them and have two separate iCloud accounts? I don't care about sharing between them. When my kids put games on my iPad, I don't want them going on my phone. How do I create a new iCloud without losing any info on the other device?

Hi sugaliko,
You may need to set up your BlueTooth connection to the keyboard again. Use the steps in this article for guidance -
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/HT1664
Thanks for using Apple Support Communities.
Best,
Brett L

I have itunes on my computer but its my wifes account. how do i create a new account for me?

i have itunes on my computer but its my wifes account. how do i create a new account?

I have the same problem,,,any help please ? thnx

I am trying to install a Canon Pixma MG8220 which requires my Airport Extreme password. I do no know it. I then went to default Airport settings and renamed my network, but Airport required my password. How do I create a new password?

How do I create a new password for my Airport Extreme if I do not know the old password?

If you have the Mac that you used to configure the AirPort Extreme originally, you may be able to retrieve the password from KeyChain Access.
See this User Tip from forum expert Tesserax:
AirPort - Regain Access from Forgotten Passwords
If still no luck, you can reset the passwords again. Pay very close attention to the information about a Soft Reset in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ

How do I create a new frame using Flash CS5 on a Mac so I can add more pictures to my website?

I have what I hope is a fairly straight forward question that I hope you can answer if you write code with a Mac or are at least familiar with the process on a Mac? The person I have been working with to create my photography website uses a PC. Here is the problem. I am trying to use my Mac in order to create frames so that I can add 5 more images to a portfolio that presently has 15 images. The code is in an index.fla file. If I want to create a new frame in the index.fla, let's say LOAD CODE 381 and want to use the same text that is already present in LOAD CODE 380 but with a few edits, I have no trouble going to the Action-Movie Clip and finding LOAD CODE 380 in the left hand column. The problem is, on a Mac, how do I create frame LOAD CODE 381 and then how do I copy and paste the text from LOAD CODE 380 into LOAD CODE 381? It looks like on a PC one can open LOAD CODE 380 in the Action-Movie Clip, highlight the text then right click on the red rectangular box in the timeline. By doing so (on a PC) one sees a drop down menu that gives the option to "copy key frame". What is the equivalent of the "copy key frame" on a Mac? I can see where on the Mac you can go to Edit >copy. Is this the equivalent of "copy key frame" on a PC? If so, once I "copy" the text how do I create the new LOAD CODE 381 so that I can paste the text into the new frame?
I WOULD BE EXTREMELY GRATEFUL TO ANYONE WITH THE ANSWER TO THIS QUESTION! THANK YOU!!!!!

Sorry not to be more clear. It is a name assigned to one of the
frames by the person who originally designed the website and is shown
in the list of about 150 action frames that were created in this
particular fla document. This "list" comes up in the left hand column
of the Action-Frame box. When I click on Load Code 380 which is half
way down the column of frames, the following text comes up on the
large screen to the right of the column of 130 frames.
IMAGE.gotoAndPlay("start");
loadVariables("data/series01/15title.txt", "_root.IMAGE.TITLE");
loadVariables("data/series01/15price.txt", "_root.IMAGE.PRICE");
loadMovie("data/series01/about.swf", "_root.IMAGE.ABOUT");
IMAGE.mc_pic.attachMovie("pic","pic",1,)
IMAGE.mc_picTHUMB.attachMovie("pic","pic",1,)
This text is what I am trying to transfer to copy then paste into a
new frame after which time I want to slightly edit the text. I am not
a programer so I apologize if I am not using all of the correct
terminology.
Thank you again, Jon

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

http://support.apple.com/kb/HT4627

How do I create a new playlist when all four options are not available

I'm running iTunes 11.1.5 under Mavericks 10.9.2. Because I have a very large music collection I keep it on an external drive. I have six recorded lectures I'd like to sync with my iPad. How do I create a new playlist based on the recordings on the external drive? All four New Playlist options are currently not selectable. I know it can be done because I've done it before years ago but have forgotten how.
Yes, I too wish iTunes were more coherent and less convoluted.
Appreciated.

Hi Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo . Then go to music click on play list and try to make one. Cheers Brian

How do I create a new alert sound?

Similar Messages

Maybe you are looking for